Dedicated Subsystem WorkbenchPlatform Gen: 2018–2026

2019 Ducati Panigale V4 Suspension Hydraulics, Fork Fluids & Sag Tuner

Front fork travel, rear shock travel, spring preload, damping click baselines, and dynamic rider sag calculator for 2019 Ducati Panigale V4.

Gen 2018–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2018 through 2026.

Select Model Year:(Active: 2019)

2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

1103cc

Drive

525

Cooling

Liquid-Cooled

Suspension Hydraulics, Fork Fluids & Interactive Sag Tuner

Showa • KYB • WP Standards

OEM hydraulic capacities, air-gap measurement standards, clicker baselines, and mathematical rider sag tuning.

Shop 43mm Fork Seals

Fork Architecture

Inverted USD Big Piston Fork (43mm Showa BPF)

Oil Volume Per Leg

490 ml (16.6 US fl oz) per leg

OEM Fluid Specification

Showa SS-08 (SAE 10W)

Air-Gap Spec (Oil Level)

110 mm (4.33 in) compressed, spring removed

Fork Seal Dimensions

43 x 54 x 11 mm

Total Suspension Travel

Front: 120 mm • Rear: 130 mm

Target Rider Sag: 28 - 34 mm (23 - 28% of 120 mm travel)

Front Preload Baseline

6 turns in from full soft

Rebound Damping Baseline

2.5 turns out from fully seated

Compression Damping Baseline

2.0 turns out from fully seated

Target Free Sag (Unladen)

20 - 25 mm

Enter 3-Point Sag Measurements (mm)

L1: Extended

L2: Static Bike

L3: In Full Gear

Suspension Sag Diagnosis & Geometry Status

Enter your extended, static, and rider measurements on the left (or select a preset) to compute exact sag percentages and spring preload recommendations.

Factory Fluid StandardDirect Spec

Maxima Racing Fork Fluid 10W (1 Liter)

Formulated with anti-foam agents and shear-stable viscosity index improvers to prevent damping fade under aggressive riding heat.

Fork & Dust Seal KitExact Stanchion Fit

All Balls Racing 43mm Fork & Dust Seal Kit

Features directional triple-lip rubber seal profile and external garter springs engineered to withstand heavy stanchion flex without weeping.

Air-Gap Tuning PhysicsBottoming Control

110 mm (4.33 in) compressed, spring removed

Trapped air column acts as a progressive spring in final 30% of stroke. Adding +5mm oil increases bottoming resistance without stiffening small bump compliance.

Recommended Maintenance Parts: Maxima Racing Fork Fluid 10W (1 Liter) • All Balls Racing 43mm Fork & Dust Seal Kit

Shop Fork Fluids Find Direct-Fit Fork Seals

Official NHTSA Safety Recalls & Technical Bulletins

6 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 6 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #19V382000FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP

Received: 20/05/2019▼

Defect Description

Ducati North America (Ducati) is recalling certain 2018-2019 Panigale V4, Panigale V4 S, Panigale Speciale, and 2019 Panigale R motorcycles. Excessive pressure in the fuel tank may cause fuel to spray when opening the fuel cap.

Safety Hazard / Consequence

Fuel spray can increase the risk of injury and a fuel leak in the presence of an ignition source can increase the risk of a fire.

Factory Remedy & Repair Action

Ducati will notify owners, and dealers will update the fuel cap venting system, provide an updated page for the owner's manual, and affix a warning label decal to the fuel tank, free of charge. The recall began July 9, 2019. Owners may contact Ducati customer service at 1-888-391-5446. Ducati's number for this recall is SRV-RCL-19-001. Note: This recall includes motorcycles that may have been previously remedied under recall 18V-238 for a similar issue.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

NHTSA #18V480000SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:PADS

Received: 19/07/2018▼

NHTSA #18V854000ENGINE AND ENGINE COOLING:ENGINE

Received: 30/11/2018▼

NHTSA #18V834000ENGINE AND ENGINE COOLING:ENGINE

Received: 27/11/2018▼

NHTSA #18V239000FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Received: 16/04/2018▼

NHTSA #18V238000FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP

Received: 16/04/2018▼