Dedicated Subsystem WorkbenchPlatform Gen: 2018–2026

2024 Ducati Panigale V4 Suspension Hydraulics, Fork Fluids & Sag Tuner

Front fork travel, rear shock travel, spring preload, damping click baselines, and dynamic rider sag calculator for 2024 Ducati Panigale V4.

Gen 2018–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2018 through 2026.

Select Model Year:(Active: 2024)

2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

1103cc

Drive

525

Cooling

Liquid-Cooled

Suspension Hydraulics, Fork Fluids & Interactive Sag Tuner

Showa • KYB • WP Standards

OEM hydraulic capacities, air-gap measurement standards, clicker baselines, and mathematical rider sag tuning.

Shop 43mm Fork Seals

Fork Architecture

Inverted USD Big Piston Fork (43mm Showa BPF)

Oil Volume Per Leg

490 ml (16.6 US fl oz) per leg

OEM Fluid Specification

Showa SS-08 (SAE 10W)

Air-Gap Spec (Oil Level)

110 mm (4.33 in) compressed, spring removed

Fork Seal Dimensions

43 x 54 x 11 mm

Total Suspension Travel

Front: 120 mm • Rear: 130 mm

Target Rider Sag: 28 - 34 mm (23 - 28% of 120 mm travel)

Front Preload Baseline

6 turns in from full soft

Rebound Damping Baseline

2.5 turns out from fully seated

Compression Damping Baseline

2.0 turns out from fully seated

Target Free Sag (Unladen)

20 - 25 mm

Enter 3-Point Sag Measurements (mm)

L1: Extended

L2: Static Bike

L3: In Full Gear

Suspension Sag Diagnosis & Geometry Status

Enter your extended, static, and rider measurements on the left (or select a preset) to compute exact sag percentages and spring preload recommendations.

Factory Fluid StandardDirect Spec

Maxima Racing Fork Fluid 10W (1 Liter)

Formulated with anti-foam agents and shear-stable viscosity index improvers to prevent damping fade under aggressive riding heat.

Fork & Dust Seal KitExact Stanchion Fit

All Balls Racing 43mm Fork & Dust Seal Kit

Features directional triple-lip rubber seal profile and external garter springs engineered to withstand heavy stanchion flex without weeping.

Air-Gap Tuning PhysicsBottoming Control

110 mm (4.33 in) compressed, spring removed

Trapped air column acts as a progressive spring in final 30% of stroke. Adding +5mm oil increases bottoming resistance without stiffening small bump compliance.

Recommended Maintenance Parts: Maxima Racing Fork Fluid 10W (1 Liter) • All Balls Racing 43mm Fork & Dust Seal Kit

Shop Fork Fluids Find Direct-Fit Fork Seals

Official NHTSA Safety Recalls & Technical Bulletins

2 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 2 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #26V050000SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

Received: 28/01/2026▼

Defect Description

Ducati North America (Ducati) is recalling certain 2025-2026 Streetfighter V4, Streetfighter V4 S, Panigale V4, and Panigale V4 S motorcycles. Excessive heat may damage the rear brake hose between the ABS control unit and brake caliper, resulting in a sudden loss of the rear brakes.

Safety Hazard / Consequence

A sudden loss of rear brake function increases the risk of a crash or injury.

Factory Remedy & Repair Action

Dealers will replace the thermal shield, free of charge. Owner notification letters were mailed March 9, 2026. Owners may contact Ducati customer service at 1-888-391-5446. Ducati's number for this recall is SRV-RCL-26-001. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on February 3, 2026. This recall expands and replaces previous NHTSA recall number 25V013. Vehicles repaired under the previous recall will need to have the new remedy completed.

NHTSA #25V570000POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT

Received: 03/09/2025▼