Dedicated Subsystem WorkbenchPlatform Gen: 2019–2026

2024 BMW S 1000 RR Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2024 BMW S 1000 RR: intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Gen 2019–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2019 through 2026.

Select Model Year:(Active: 2024)

2019 2020 2021 2022 2023 2024 2025 2026

Engine

999cc

Drive

525

Cooling

Liquid/Oil-Cooled

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances

Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.

Adjustment Mechanism: 9.48 mm

Active Valve Range (INTAKE)

0.12 - 0.20 mm

0.005 - 0.008 in

Nominal Mid-Spec Target

0.16 mm

Ideal cold lash assembly setting

Shim Diameter / Tappet

9.48 mm

Bucket-and-shim interface

Measurement Condition

Cold Engine (≤ 35°C / 95°F)

TDC compression stroke only

Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)

1. Feeler Gauge Measured Clearance (mm)

Factory intake tolerance: 0.12 - 0.20 mm

2. Currently Installed Shim (mm)

Measured with micrometer or read laser-etched face

TDC Crankshaft Timing Index

Align crankshaft TDC mark with engine timing index pointer

Feeler Gauge Technique

Angled blade feeler gauge (cold engine ≤ 35°C / 95°F)

Official NHTSA Safety Recalls & Technical Bulletins

3 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 3 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #26V115000EXTERIOR LIGHTING:TURN SIGNAL:SWITCH

Received: 26/02/2026▼

Defect Description

BMW of North America, LLC (BMW) is recalling one 2026 S 1000 RR motorcycle. The turn signal reset button can be unintentionally activated at the same time as the turn signal, resulting in an inoperative turn signal. As such, this vehicle fails to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment."

Safety Hazard / Consequence

Turn signals that fail to activate as intended increase the risk of a crash.

Factory Remedy & Repair Action

A dealer will replace the combination switch, free of charge. The motorcycle has not yet been sold and therefore no owner notification letters will be mailed. The Vehicle Identification Number (VIN) involved in this recall will be searchable on NHTSA.gov on April 20, 2026.

NHTSA #26V478000ELECTRICAL SYSTEM:IGNITION

Received: 23/07/2026▼

NHTSA #22V752000POWER TRAIN:CLUTCH ASSEMBLY

Received: 07/10/2022▼