Dedicated Subsystem WorkbenchPlatform Gen: 2019–2026

2024 BMW S 1000 RR Suspension Hydraulics, Fork Fluids & Sag Tuner

Front fork travel, rear shock travel, spring preload, damping click baselines, and dynamic rider sag calculator for 2024 BMW S 1000 RR.

Gen 2019–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2019 through 2026.

Select Model Year:(Active: 2024)

2019 2020 2021 2022 2023 2024 2025 2026

Engine

999cc

Drive

525

Cooling

Liquid/Oil-Cooled

Suspension Hydraulics, Fork Fluids & Interactive Sag Tuner

Showa • KYB • WP Standards

OEM hydraulic capacities, air-gap measurement standards, clicker baselines, and mathematical rider sag tuning.

Shop 45mm Fork Seals

Fork Architecture

Inverted USD Closed Cartridge (45mm Marzocchi / DDC)

Oil Volume Per Leg

490 ml (16.6 US fl oz) per leg

OEM Fluid Specification

BMW Type 2 Fork Oil (SAE 5W)

Air-Gap Spec (Oil Level)

95 mm (3.74 in) compressed, spring removed

Fork Seal Dimensions

45 x 58 x 11 mm

Total Suspension Travel

Front: 120 mm • Rear: 117 mm

Target Rider Sag: 30 - 35 mm (25 - 29% of 120 mm travel)

Front Preload Baseline

6 turns in from full soft

Rebound Damping Baseline

Electronic DDC Dynamic Damping Control

Compression Damping Baseline

Electronic DDC Dynamic Damping Control

Target Free Sag (Unladen)

20 - 25 mm

Enter 3-Point Sag Measurements (mm)

L1: Extended

L2: Static Bike

L3: In Full Gear

Suspension Sag Diagnosis & Geometry Status

Enter your extended, static, and rider measurements on the left (or select a preset) to compute exact sag percentages and spring preload recommendations.

Factory Fluid StandardDirect Spec

Maxima Racing Fork Fluid 5W (1 Liter)

Formulated with anti-foam agents and shear-stable viscosity index improvers to prevent damping fade under aggressive riding heat.

Fork & Dust Seal KitExact Stanchion Fit

All Balls Racing 45mm Fork & Dust Seal Kit

Features directional triple-lip rubber seal profile and external garter springs engineered to withstand heavy stanchion flex without weeping.

Air-Gap Tuning PhysicsBottoming Control

95 mm (3.74 in) compressed, spring removed

Trapped air column acts as a progressive spring in final 30% of stroke. Adding +5mm oil increases bottoming resistance without stiffening small bump compliance.

Recommended Maintenance Parts: Maxima Racing Fork Fluid 5W (1 Liter) • All Balls Racing 45mm Fork & Dust Seal Kit

Shop Fork Fluids Find Direct-Fit Fork Seals

Official NHTSA Safety Recalls & Technical Bulletins

3 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 3 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #26V115000EXTERIOR LIGHTING:TURN SIGNAL:SWITCH

Received: 26/02/2026▼

Defect Description

BMW of North America, LLC (BMW) is recalling one 2026 S 1000 RR motorcycle. The turn signal reset button can be unintentionally activated at the same time as the turn signal, resulting in an inoperative turn signal. As such, this vehicle fails to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment."

Safety Hazard / Consequence

Turn signals that fail to activate as intended increase the risk of a crash.

Factory Remedy & Repair Action

A dealer will replace the combination switch, free of charge. The motorcycle has not yet been sold and therefore no owner notification letters will be mailed. The Vehicle Identification Number (VIN) involved in this recall will be searchable on NHTSA.gov on April 20, 2026.

NHTSA #26V478000ELECTRICAL SYSTEM:IGNITION

Received: 23/07/2026▼

NHTSA #22V752000POWER TRAIN:CLUTCH ASSEMBLY

Received: 07/10/2022▼