Dedicated Subsystem WorkbenchPlatform Gen: 2019–2026

2022 BMW S 1000 RR Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2022 BMW S 1000 RR: intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Gen 2019–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2019 through 2026.

Select Model Year:(Active: 2022)

2019 2020 2021 2022 2023 2024 2025 2026

Engine

999cc

Drive

525

Cooling

Liquid/Oil-Cooled

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances

Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.

Adjustment Mechanism: 9.48 mm

Active Valve Range (INTAKE)

0.12 - 0.20 mm

0.005 - 0.008 in

Nominal Mid-Spec Target

0.16 mm

Ideal cold lash assembly setting

Shim Diameter / Tappet

9.48 mm

Bucket-and-shim interface

Measurement Condition

Cold Engine (≤ 35°C / 95°F)

TDC compression stroke only

Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)

1. Feeler Gauge Measured Clearance (mm)

Factory intake tolerance: 0.12 - 0.20 mm

2. Currently Installed Shim (mm)

Measured with micrometer or read laser-etched face

TDC Crankshaft Timing Index

Align crankshaft TDC mark with engine timing index pointer

Feeler Gauge Technique

Angled blade feeler gauge (cold engine ≤ 35°C / 95°F)

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #22V752000POWER TRAIN:CLUTCH ASSEMBLY

Received: 07/10/2022▼

Defect Description

BMW of North America, LLC (BMW) is recalling certain 2022 S1000RR, M1000RR, and 2022-2023 S1000XR and S1000R motorcycles. The clutch cover bolts were not lubricated properly, which may cause the clutch cover to become loose and leak oil.

Safety Hazard / Consequence

An oil leak occurring at the clutch cover increases the risk of a crash or fire.

Factory Remedy & Repair Action

Dealers will replace all 10 clutch cover bolts, free of charge. Owner notification letters were mailed December 6, 2022. Owners may contact BMW customer service at 1-800-525-7417.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.