Question 1

What technical specifications are included in the WowShopper Motorcycle Directory?

Accepted Answer

The WowShopper Motorcycle Factory Specifications Directory provides verified OEM-grade workshop data including engine oil capacities with filter, recommended oil viscosities (e.g., 10W-40, 20W-50), OEM spark plug part numbers and electrode gap tolerances, drive chain pitch and slack, cold tire inflation pressures (front and rear PSI), primary and transmission fluid capacities, valve clearances, and factory fastener torque specifications.

Question 2

Why should motorcycle maintenance specifications be verified against OEM data?

Accepted Answer

Motorcycle engines and chassis operate under high mechanical loads and RPM ranges. Using improper oil viscosities can cause premature valvetrain wear or clutch slippage in wet-clutch systems. Incorrect tire pressures alter contact patches and handling dynamics, while improper drive chain slack risks binding and damaging transmission countershaft bearings.

Question 3

Are the tire pressure specifications listed for cold or hot tires?

Accepted Answer

All tire pressures listed in our workshop directory are cold inflation pressures, measured before riding when tires are at ambient outdoor temperature. Riding generates internal tire friction that increases air pressure by 3 to 6 PSI.

Question 4

How do I look up factory specifications for my specific motorcycle?

Accepted Answer

Select your motorcycle manufacturer from the directory list (e.g., Harley-Davidson, Yamaha, Honda, Suzuki, Kawasaki, BMW, Ducati, KTM, Triumph, Aprilia, Indian, Husqvarna), or enter your model name into the search bar. You can also view dedicated subsystem manuals including ignition, braking, and drivetrain.

Question 5

How does applying threadlocker or anti-seize affect motorcycle fastener torque?

Accepted Answer

Factory motorcycle torque specifications assume clean, dry threads unless explicitly stated. Lubricating threads with anti-seize, threadlocker (Loctite), or motor oil lowers the friction coefficient (K-factor) by 15% to 25%. Tightening a lubricated fastener to the published dry torque generates excessive bolt tension (preload) that can stretch the bolt past its yield limit or strip soft aluminum crankcase threads.

Question 6

Why do motorcycle valve clearances get tighter instead of looser over time?

Accepted Answer

As motorcycle engines accumulate operating hours, repeated valve seat impacts cause microscopic valve face recession into the cylinder head. This recession draws the valve stem upward toward the camshaft, shrinking the cold clearance gap. If neglected, the clearance gap reduces to zero, preventing the valve from fully seating to dissipate heat, leading to burned exhaust valves and lost cylinder compression.

Motorcycle Factory Specifications & Maintenance Directory

701 Enduro / Supermoto

Vitpilen 701 / Svartpilen 701

Norden 901 / Expedition

Svartpilen 401 / Vitpilen 401

Motorcycle Factory Specifications & Maintenance Directory

701 Enduro / Supermoto

Vitpilen 701 / Svartpilen 701

Norden 901 / Expedition

Svartpilen 401 / Vitpilen 401