Free Shipping Over $15030-Day Returns
Free Shipping $150+30-Day Returns
WOWSHOPPERMOTORSPORTS
← Full Motorcycle OverviewShop Parts For This Ride →
Dedicated Subsystem WorkbenchPlatform Gen: 2023–2026

sms%3A6572176457 Suzuki V-Strom 800DE Tire Sizes, Cold Pressures & Gearing Ratios

OEM tire sizes, front cold PSI (), rear cold PSI (), sprocket teeth count, final drive ratio, and chain pitch for sms%3A6572176457 Suzuki V-Strom 800DE.

Technical PassportOEM VERIFIED
Engine
776cc
Cooling
Not Available
Final Drive
Chain
Engine Oil
3.40 L (3.60 US qt)
Spark Plug
NGK CPR8EA-9
Front Tire
90/90-21 M/C 54H (Tube type)
Browse Flagship Teardowns →
Gen 2023–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2023 through 2026.

Select Model Year:(Active: sms%3A6572176457)
4 Production Years (2023–2026)
Suggested Items3 Verified Workshop Consumables Available for this Job
View Suggested Items ↓

Tire Engineering & Multi-Scenario Pressure Matrix

ETRTO Validated
Inflation targets calibrated across operating modes, verified rim width ranges, and certified alternate sizes.
Shop Direct-Fit Tires
Multi-Scenario Inflation Pressures
Solo Street / CommutingCold Baseline
Front: Not Available
Rear: Not Available
Two-Up Passenger & LuggageMax Load
Front: Not Available
Rear: Not Available
Off-Highway / Terrain Pressure
Maintain OEM cold baseline for street transfers; adjust -2 to -4 PSI for loose terrain.
Rim Geometry & ETRTO Envelopes
Front Wheel
OEM Rim Width:Not Available
Permissible Envelope:Not Available
Rear Wheel
OEM Rim Width:Not Available
Permissible Envelope:Not Available
Operating outside ETRTO envelope width alters crown radius, accelerates shoulder wear, and impacts lean stability.
Factory Dimensions & Verified Alternates
Factory Standard Sizes
Front:90/90-21 M/C 54H (Tube type)
Rear:150/70R17 M/C 69H (Tube type)
Shop In-Stock Matched 2-Tire Sets→
Verified Alternate Fitments
Factory standard sizing recommended.
Alternate profiles verified for swingarm, chain guard, and fender clearances.

Final Drive Gearing & Speed/RPM Calculator

Chain
Factory reduction ratios, interactive sprocket gearing simulator, 6th gear cruising RPM matrix, and swingarm chain adjustment tolerances.
Drive Ratio & Torque Impact
Calculated Final RatioStock: 2.813
2.813 : 1
Drivetrain Torque Delta
OEM Factory Baseline Dynamics
Balanced all-around factory engineering calibrated for EPA emissions and street usability.
Countershaft Speedo Variance:0.0%
Speedometer reads true to factory calibration standards.
Cruising Engine RPM in 6th Gear
60 MPH
Stock: 3,483 RPM
3,483 RPM
70 MPH
Stock: 4,064 RPM
4,064 RPM
80 MPH
Stock: 4,644 RPM
4,644 RPM
Calculated using factory 6th gear ratio (0.923), primary reduction (1.681), and 150/70R17 M/C 69H (Tube type) rolling circumference.
Cardan Bevel Gear Maintenance
Recommended Belt:
Factory Chassis Geometry

Chassis Alignment, Drive Tension & Rear Axle Calibration

Precision workshop alignment tools, dynamic drive tension tolerances, and axle spindle calibration for the sms%3A6572176457 Suzuki V-Strom 800DE.

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
No Active Federal Safety Recalls Reported
The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the sms%3A6572176457 Suzuki V-Strom 800DE platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin
Bulletin #SUZ-24V535Safety Recall 3A03: Rear Wheel Tire Tread Cracking & Dunlop Trailmax Mixtour Replacement
Source: Suzuki_VStrom800DE_Recall24V535_3A03_RearTire.pdf
Mandated Torques:Torque: 100 N·m (74.0 lbf·ft) (Rear Wheel Axle Castle Nut - M22 x 1.5)Torque: 22 N·m (16.5 lbf·ft) (Chain Adjuster 12mm Locknuts - 90° Crowfoot)Torque: 60 N·m (44.0 lbf·ft) (Rear Driven Sprocket 6x Flange Locknuts)Torque: 35 N·m (26.0 lbf·ft) (Rear Brake Rotor Torx/Hex Mounting Bolts)Torque: 25 N·m (18.5 lbf·ft) (Rear Caliper Torque Link Pin)
Consumable Specs:Stainless Steel Axle Cotter Pin (04111-4035A)Tire Mounting Bead Lubricant (Soap-Based)Tire Balancing Adhesive Weights
Genuine Part Numbers:65110-25810-RX065110-25L30-RX065200-25810-RX065311-25810-RX004111-4035A
NHTSA Recall 24V-535Campaign 3A03

V-Strom 800DE Rear Tire & Axle Adjustment Assembly

Countermeasure 150/70R17 tube-type rear tire, axle cotter pin locking, and 12mm crowfoot torque adapter geometry.

Federal Safety RemedyAxle 100 N·m / Crowfoot 22 N·m
SWINGARM DROPOUT / AXLE SLOTREAR AXLE CASTLE NUT100 N·m (74.0 lb-ft)New Stainless Cotter PinADJUSTER LOCKNUT (12mm)22 N·m (16.5 lb-ft)Crowfoot Perpendicular (90°)COUNTERMEASURE REAR TIRE150/70R17 M/C 69H TTPart: 65110-25L30-RX0

Click any element above for factory alignment marks, crowfoot wrench angle rules, and cotter pin installation.

Factory Tightening TorquesService Manual

Rear Wheel Axle Nut (M22 × 1.5)100 N·m (74.0 lb-ft)
Castle nut with new stainless cotter pin (04111-4035A)
Chain Adjuster Locknut (12mm) - Direct22 N·m (16.5 lb-ft)
Standard socket directly on adjuster locknut
Chain Adjuster Locknut - 90° Crowfoot22 N·m (16.5 lb-ft)
Crowfoot set strictly at 90° perpendicular to torque wrench centerline
Rear Driven Sprocket Locknuts (6x)60 N·m (44.0 lb-ft)
Diagonal cross-pattern tightening; self-locking flange nuts
Rear Brake Disc Mounting Bolts35 N·m (26.0 lb-ft)
Pre-coated threadlock; replace or apply medium threadlocker
Rear Caliper Carrier Guide Pin25 N·m (18.5 lb-ft)
Inspect slide pins and rubber boots for integrity

Explore Other Subsystems for this sms%3A6572176457 Suzuki V-Strom 800DE

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview
Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →
Subsystem Guide/fluids

Fluids & Capacities

Oil: 3.40 L (3.60 US qt) • Coolant: 1.70 L (1.80 US qt) • Brake: DOT 4 Brake Fluid

Open Dedicated Workbench →
Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →
Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →
Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →
Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →
Subsystem Guide/electrical

Charging & Battery

Battery: YTX9-BS (12V 8Ah)

Open Dedicated Workbench →
Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →
Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →
← Return to Full Comprehensive Motorcycle Specification Hub (sms%3A6572176457 Suzuki V-Strom 800DE)

Looking for direct-fit parts for this sms%3A6572176457 V-Strom 800DE?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts