Free Shipping Over $15030-Day Returns
800-288-0640
Free Shipping $150+30-Day Returns800-288-0640
WOWSHOPPERMOTORSPORTS
Shop Parts For This Ride →
Factory Workshop SpecificationsPlatform Gen: 2021–2026

2026 Suzuki Hayabusa (GSX1300R) Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Gen 2021–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2021 through 2026.

Select Model Year:(Active: 2026)
Engine
1340cc
Drive
530
Cooling
Liquid-Cooled

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2026 Suzuki Hayabusa (GSX1300R).

10 Dedicated Engineering Spoke Pages
Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →
Subsystem Guide/fluids

Fluids & Capacities

Oil: 3.30 L (3.49 US qt) • Coolant: 3.20 L (3.38 US qt) • Brake: DOT 4

Open Dedicated Workbench →
Subsystem Guide/fuses-relays

Fuses & Relays

Main: 30A Blade / Starter Magnetic Relay • Location: N/A

Open Dedicated Workbench →
Subsystem Guide/compression

Compression & Leakdown

Ratio: 12.5:1 • Std: 165-215 PSI • Limit: 140 PSI

Open Dedicated Workbench →
Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →
Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →
Subsystem Guide/electrical

Charging & Battery

Battery: YT12A-BS • CCA: 175 • Regulated: 14.0 - 14.8 V DC

Open Dedicated Workbench →
Subsystem Guide/tires

Tires & Gearing

Front: 120/70ZR17 • Rear: 190/50ZR17

Open Dedicated Workbench →
Subsystem Guide/suspension

Suspension & Sag

Front Travel: 120 mm • Rear Travel: 130 mm

Open Dedicated Workbench →
Subsystem Guide/maintenance

Maintenance Schedule

Oil: Every 3,500 miles (6,000 km) mi • Valves: N/A • Plugs: Every 7,500 miles (12,000 km) mi

Open Dedicated Workbench →
Fluids & Service Capacities
Shop Fluids →
Engine Oil (Drain & Filter Change)3.30 L (3.49 US qt)
Engine Oil (Drain Only)3.00 L (3.17 US qt)
Recommended Oil Viscosity10W-40 API SF/SG or higher, JASO MA
Coolant System Capacity3.20 L (3.38 US qt)
Brake Fluid StandardDOT 4
Drivetrain, Chain & Gearing
Drive Chain Pitch530
Chain Link Count114 Links
Front Sprocket Teeth18T
Rear Sprocket Teeth43T
Final Drive Configuration530 Pitch Chain
Ignition & Electrical Specifications
Shop Plugs & Batteries →
OEM Spark Plug Part NumberNGK CR9EIA-9
Electrode Spark Plug Gap0.8 - 0.9 mm (0.031 - 0.035 in)
OEM Battery Reference CodeYT12A-BS
Battery Output & Rating12V 10Ah 175 CCA
Spark Plug Inspection Interval7,500 miles (12,000 km) miles
Wheels, Tires & Inflation Pressures
Shop Tires →
Front Tire Dimensions120/70ZR17
Cold Front Inflation Pressure42 PSI (Cold)
Rear Tire Dimensions190/50ZR17
Cold Rear Inflation Pressure42 PSI (Cold)
OEM Wheel Rim Widths (F / R)3.50" / 6.00"

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
No Active Federal Safety Recalls Reported
The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2026 Suzuki Hayabusa (GSX1300R) platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins
Bulletin #SUZ-24V769Safety Recall 3A04: Front Brake Master Cylinder Reservoir Fluid Return Port Clearance
Source: Suzuki_Hayabusa_Recall24V769_3A04_MasterCylinder.pdf
Mandated Torques:Torque: 10 N·m (7.5 lbf·ft) (Master Cylinder Handlebar Clamp Bolts - Upper First Zero Gap)Torque: 23 N·m (16.5 lbf·ft) (Brake Hose Union Banjo Bolt - New Sealing Washers)Torque: 7.5 N·m (5.5 lbf·ft) (Master Cylinder Upper Bleeder Screw)Torque: 1.5 N·m (13 lbf·in) (Brake Reservoir Cap Screws)
Consumable Specs:Suzuki ECSTAR DOT 4 Brake Fluid (990A0-04000)Genuine Copper Sealing Washers (09161-10009)
Genuine Part Numbers:59600-10870-RX009161-10009
HAYABUSA HYDRAULIC BRAKINGExploded View: Front Brake Master Cylinder & Non-Reactive Seals (Safety Recall 24V-769 / 3A04)
KIT # 59600-10870-RX0NHTSA 24V-769
HANDLEBARALIGN DOT▲ UP1st: ZERO GAP2nd: 10 N·mNON-SWELLING SEALUPPERLOWERUPDATED EPDM DIAPHRAGMBLEEDER: 6.0 N·mBANJO BOLT • 23 N·mTO STYLEMA CALIPERS5BREMBO BRAKE LEVERNew EPDM Diaphragm & CapRemedy MC Kit # 59600-10870-RX0Upper Clamp First (Zero Gap) • 10 N·mBanjo Union Bolt • 23 N·m

Countermeasure Front Brake Master Cylinder Body

Genuine Kit # 59600-10870-RX0 (Campaign 3A04)
Clamp Bolts: 10 N·m (7.4 lbf·ft) • Upper Bolt UP Mark Zero-Gap First

CRITICAL RECALL SAFETY COUNTERMEASURE (Recall 24V-769 / Campaign 3A04 / Supersedes 2A99). Chemical reaction between factory brake fluid and primary cup rubber caused swelling, blocking fluid return and causing brake drag or lever displacement. Replace with updated master cylinder body and redesigned non-reactive seals.

Bulletin #SUZ-24V038Safety Recall 3A01: ABS Hydraulic Actuator Unit Flare Nut Torque & Alignment Verification
Source: Suzuki_Hayabusa_Recall24V038_3A01_ABSFlareNut.pdf
Mandated Torques:Torque: 16 N·m (12.0 lbf·ft) (10mm Brake Pipe Flare Nuts to ABS Actuator Ports - 90° Crowfoot)Torque: 10 N·m (7.5 lbf·ft) (ABS Control Unit Bracket Retaining Bolts)Torque: 23 N·m (16.5 lbf·ft) (Master Cylinder to ABS Pipe Banjo Fittings)
Consumable Specs:Suzuki ECSTAR DOT 4 Brake FluidPermanent Blue Inspection Paint Pen (Torque Witness Mark)Isopropyl Alcohol Contact Cleaner (Residue Inspection)
Genuine Part Numbers:55110-10L0009161-10009
HAYABUSA ABS HYDRAULICSExploded View: ABS Module Flare Nut Torque & 90° Socket Protocol (Safety Recall 24V-038 / 3A01)
TORQUE: 16 N·m (12 lb-ft)NHTSA 24V-038
SUZUKI ABS HYDRAULIC CONTROL UNITFR-MCFR-CALRR-MCRR-CAL4x 10mm FLARE NUTS • TORQUE: 16 N·m (12 lb-ft)90° ANGLE MANDATETorque Wrench BeamFlare HeadNO TORQUE FORMULA NEEDEDBLUE PAINT PROOFPaint Line AcrossNut & Pipe SeamCertifies 16 N·m Remedy10mm Flare Nut Socket • 16 N·m (12.0 lb-ft)90°

10mm Brake Fluid Pipe Flare Nuts (4x Ports)

Brake Lines: FR MC, FR Caliper, RR MC, RR Caliper
16 N·m (12.0 lb-ft, 1.6 kgf-m) with 10mm Flare Socket at 90°

CRITICAL RECALL SAFETY MANDATE (Recall 24V-038 / Campaign 3A01). Flare nut installation torque at the ABS hydraulic unit may have been insufficient during assembly, creating a risk of brake fluid seepage. Retorque all four flare nuts strictly to 16 N·m using a 10mm flare nut socket wrench positioned at exactly 90 degrees to the torque wrench drive head.

Looking for direct-fit parts for this 2026 Hayabusa (GSX1300R)?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts
2026 Suzuki Hayabusa (GSX1300R) Factory Workshop Specs & Maintenance Guide | WowShopper | WowShopper Motorsports