Skip to Main Content
Free Shipping Over $15030-Day Returns
Free Shipping $150+30-Day Returns
Factory Workshop SpecificationsPlatform Gen: 2021–2026

2022 Suzuki Hayabusa (GSX1300R) Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Technical PassportOEM VERIFIED
Engine
1340cc
Cooling
Liquid-Cooled
Final Drive
530 Chain
Engine Oil
3.30 L (3.49 US qt)
Spark Plug
NGK CR9EIA-9
Front Tire
120/70ZR17
Gen 2021–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2021 through 2026.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available
1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2022 Suzuki Hayabusa (GSX1300R).
Configure Service Bundles→
Select Model Year:(Active: 2022)
6 Production Years (2021–2026)

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2022 Suzuki Hayabusa (GSX1300R).

10 Dedicated Engineering Spoke Pages
Fluids & Service Capacities
Shop Fluids →
Engine Oil (Drain & Filter Change)3.30 L (3.49 US qt)
Engine Oil (Drain Only)3.00 L (3.17 US qt)
Recommended Oil Viscosity10W-40 API SF/SG or higher, JASO MA
Coolant System Capacity3.20 L (3.38 US qt)
Brake Fluid StandardDOT 4
Drive Chain Pitch530
Chain Link Count114 Links
Front Sprocket Teeth18T
Rear Sprocket Teeth43T
Final Drive Configuration530 Pitch Chain
Ignition & Electrical Specifications
Shop Plugs & Batteries →
OEM Spark Plug Part NumberNGK CR9EIA-9
Electrode Spark Plug Gap0.8 - 0.9 mm (0.031 - 0.035 in)
OEM Battery Reference CodeYT12A-BS
Battery Output & Rating12V 10Ah 175 CCA
Spark Plug Inspection Interval7,500 miles (12,000 km) miles
Wheels, Tires & Inflation Pressures
Front Tire Dimensions120/70ZR17
Cold Front Inflation Pressure42 PSI (Cold)
Rear Tire Dimensions190/50ZR17
Cold Rear Inflation Pressure42 PSI (Cold)
OEM Wheel Rim Widths (F / R)3.50" / 6.00"
Verified OEM Wheel Fitment: 120/70-17 (F) + 190/50-17 (R)
Shop In-Stock Matched Pairs→

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
No Active Federal Safety Recalls Reported
The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2022 Suzuki Hayabusa (GSX1300R) platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins
Bulletin #SUZ-24V769Safety Recall 3A04: Front Brake Master Cylinder Reservoir Fluid Return Port Clearance
Source: Suzuki_Hayabusa_Recall24V769_3A04_MasterCylinder.pdf
Mandated Torques:Torque: 10 N·m (7.5 lbf·ft) (Master Cylinder Handlebar Clamp Bolts - Upper First Zero Gap)Torque: 23 N·m (16.5 lbf·ft) (Brake Hose Union Banjo Bolt - New Sealing Washers)Torque: 7.5 N·m (5.5 lbf·ft) (Master Cylinder Upper Bleeder Screw)Torque: 1.5 N·m (13 lbf·in) (Brake Reservoir Cap Screws)
Consumable Specs:Suzuki ECSTAR DOT 4 Brake Fluid (990A0-04000)Genuine Copper Sealing Washers (09161-10009)
Genuine Part Numbers:59600-10870-RX009161-10009
HAYABUSA HYDRAULIC BRAKINGExploded View: Front Brake Master Cylinder & Non-Reactive Seals (Safety Recall 24V-769 / 3A04)
KIT # 59600-10870-RX0NHTSA 24V-769
HANDLEBARALIGN DOT▲ UP1st: ZERO GAP2nd: 10 N·mNON-SWELLING SEALUPPERLOWERUPDATED EPDM DIAPHRAGMBLEEDER: 6.0 N·mBANJO BOLT • 23 N·mTO STYLEMA CALIPERS5BREMBO BRAKE LEVERNew EPDM Diaphragm & CapRemedy MC Kit # 59600-10870-RX0Upper Clamp First (Zero Gap) • 10 N·mBanjo Union Bolt • 23 N·m

Countermeasure Front Brake Master Cylinder Body

Genuine Kit # 59600-10870-RX0 (Campaign 3A04)
Clamp Bolts: 10 N·m (7.4 lbf·ft) • Upper Bolt UP Mark Zero-Gap First

CRITICAL RECALL SAFETY COUNTERMEASURE (Recall 24V-769 / Campaign 3A04 / Supersedes 2A99). Chemical reaction between factory brake fluid and primary cup rubber caused swelling, blocking fluid return and causing brake drag or lever displacement. Replace with updated master cylinder body and redesigned non-reactive seals.

Bulletin #SUZ-24V038Safety Recall 3A01: ABS Hydraulic Actuator Unit Flare Nut Torque & Alignment Verification
Source: Suzuki_Hayabusa_Recall24V038_3A01_ABSFlareNut.pdf
Mandated Torques:Torque: 16 N·m (12.0 lbf·ft) (10mm Brake Pipe Flare Nuts to ABS Actuator Ports - 90° Crowfoot)Torque: 10 N·m (7.5 lbf·ft) (ABS Control Unit Bracket Retaining Bolts)Torque: 23 N·m (16.5 lbf·ft) (Master Cylinder to ABS Pipe Banjo Fittings)
Consumable Specs:Suzuki ECSTAR DOT 4 Brake FluidPermanent Blue Inspection Paint Pen (Torque Witness Mark)Isopropyl Alcohol Contact Cleaner (Residue Inspection)
Genuine Part Numbers:55110-10L0009161-10009
HAYABUSA ABS HYDRAULICSExploded View: ABS Module Flare Nut Torque & 90° Socket Protocol (Safety Recall 24V-038 / 3A01)
TORQUE: 16 N·m (12 lb-ft)NHTSA 24V-038
SUZUKI ABS HYDRAULIC CONTROL UNITFR-MCFR-CALRR-MCRR-CAL4x 10mm FLARE NUTS • TORQUE: 16 N·m (12 lb-ft)90° ANGLE MANDATETorque Wrench BeamFlare HeadNO TORQUE FORMULA NEEDEDBLUE PAINT PROOFPaint Line AcrossNut & Pipe SeamCertifies 16 N·m Remedy10mm Flare Nut Socket • 16 N·m (12.0 lb-ft)90°

10mm Brake Fluid Pipe Flare Nuts (4x Ports)

Brake Lines: FR MC, FR Caliper, RR MC, RR Caliper
16 N·m (12.0 lb-ft, 1.6 kgf-m) with 10mm Flare Socket at 90°

CRITICAL RECALL SAFETY MANDATE (Recall 24V-038 / Campaign 3A01). Flare nut installation torque at the ABS hydraulic unit may have been insufficient during assembly, creating a risk of brake fluid seepage. Retorque all four flare nuts strictly to 16 N·m using a 10mm flare nut socket wrench positioned at exactly 90 degrees to the torque wrench drive head.

1-Click Factory Service KitOEM Spec Fluid Capacities Matched

Workshop Maintenance Kit & Factory Fluids

Authentic factory-grade motor oil, oil filter, and high-temp brake fluid matched precisely to 2022 Suzuki Hayabusa (GSX1300R) capacities.

Full Kit Subtotal
$74.50
SPECS-TO-CART BUNDLESDedicated Direct-Fit Maintenance Bundles Available
Explore interactive 1-click oil change packs, brake flush kits & major tune-up bundles pre-measured for this 2022 Suzuki Hayabusa (GSX1300R).
Configure Service Bundles →
Silkolene Pro 4 4T Synthetic Oil 10W-40 (4 Liter)
10W-40 JASO MA2

Silkolene Pro 4 4T Synthetic Oil 10W-40 (4 Liter)

4-Liter Factory Full Jug
Matches factory 10W-40 spec (Oil spec: 3.30 L (3.49 US qt))
Item Price
$68.95
EBC High-Performance DOT 4 Synthetic Brake Fluid
DOT 4 Synthetic Formula

EBC High-Performance DOT 4 Synthetic Brake Fluid

8.8 oz (250 ml) Workshop Bottle
Meets & exceeds factory DOT 4 specifications
Item Price
$5.55
Factory OEM Spark Plug Spec

NGK CR9EIA-9

Gap: 0.8 - 0.9 mm (0.031 - 0.035 in)
Inspection milestone: 7,500 miles (12,000 km) miles. Exact factory part specification.
Authentic OEM Reference
Search OEM Plugs →
Complete Workshop Maintenance Package3 Essential Service Items
Includes 10W-40 JASO MA2 engine oil (4-Liter Factory Full Jug), high-flow filter & DOT 4 fluid.
Kit Total
$74.50

Looking for direct-fit parts for this 2022 Hayabusa (GSX1300R)?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts
2022 Suzuki Hayabusa (GSX1300R) Factory Workshop Specs & Maintenance Guide | WowShopper | WowShopper Motorsports