Skip to Main Content
Free Shipping Over $15030-Day Returns
800-288-0640
Free Shipping $150+30-Day Returns800-288-0640
Shop Parts For This Ride →
Factory Workshop SpecificationsPlatform Gen: 2014–2024

2024 KTM 1290 Super Duke R / EVO Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Gen 2014–2024

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2014 through 2024.

Select Model Year:(Active: 2024)
Engine
1301cc
Drive
525
Cooling
Not Available

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2024 KTM 1290 Super Duke R / EVO.

10 Dedicated Engineering Spoke Pages
Fluids & Service Capacities
Shop Fluids →
Engine Oil (Drain & Filter Change)3.50 L (3.70 US qt)
Engine Oil (Drain Only)3.20 L (3.38 US qt)
Recommended Oil ViscosityMotorex Power Synt 4T SAE 10W-50 / 10W-60 (JASO MA2, API SN)
Coolant System Capacity3.20 L (3.38 US qt)
Brake Fluid StandardMotorex Brake Fluid DOT 5.1 / DOT 4
Drive Chain Pitch525
Chain Link CountN/A
Front Sprocket TeethN/A
Rear Sprocket TeethN/A
Final Drive Configuration525 Pitch Chain
Ignition & Electrical Specifications
Shop Plugs & Batteries →
OEM Spark Plug Part NumberNGK LKAR9BI-10 (Laser Iridium, 4 plugs total)
Electrode Spark Plug Gap0.8 - 0.9 mm (0.031 - 0.035 in)
OEM Battery Reference CodeYTZ14S (12V 11.2Ah AGM)
Battery Output & RatingNot Available
Spark Plug Inspection IntervalN/A
Wheels, Tires & Inflation Pressures
Shop Tires →
Front Tire Dimensions120/70ZR17 (58W)
Cold Front Inflation PressureN/A
Rear Tire Dimensions200/55ZR17 (78W)
Cold Rear Inflation PressureN/A
OEM Wheel Rim Widths (F / R)3.50" / 5.50"

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
No Active Federal Safety Recalls Reported
The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2024 KTM 1290 Super Duke R / EVO platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins
Bulletin #KTM-22V900Safety Recall KTB2211: Main Wiring Harness Subframe Chafing & Protection Clip
Source: KTM_Recall22V900_RCSB-22V900-1369.pdf
Mandated Torques:Tail Section Lower Fairing Screws (M5×12 Torx): 4 N·m (35 in-lb)Battery Terminal Screws (M6): 4.5 N·m (40 in-lb)Seat Lock Bracket Screws (M6): 6 N·m (53 in-lb)Subframe Strut Bolts (M10×40): 45 N·m (33 lb-ft)
Consumable Specs:N/A
Genuine Part Numbers:Cable Tie with Foot Section (0330000520000)Cable Tie Guide Bracket (60311046050)Cable Tie 140/2.5mm Black (44011076140)Tail Section Edge Protection Trim (61708019000)
NHTSA Recall 22V-900 & 21V-122Bulletins KTB2211 & TB2104

KTM 1290 Super Duke R / EVO Main Wiring Harness Subframe Protection

Main wiring bundle subframe tail routing, anti-abrasion edge trim installation, and footed cable tie anchor points.

Safety Recall RemedyTail Screws 4 N·m / Battery 4.5 N·m
Genuine Part Numbers:0330000520000603110460504401107614061708019000
COMPOSITE / ALUMINUM SUBFRAME TAIL ENDCHAFE POINTEDGE TRIMCABLE TIE W/ FOOT SECTIONAnchored into Pre-Drilled HolePart: 0330000520000SUBFRAME EDGE GUARDPrevents Short-Circuit ChafingPart: 61708019000CABLE TIE GUIDE & SPACERMaintains Clearance from Subframe RibPart: 60311046050

Click any component or anchor point above to inspect harness inspection criteria, tie part numbers, and torque mandates.

Bulletin #KTM-18V033Safety Recall 18V-033: Brembo 16mm PR16 Radial Master Cylinder Aluminum Piston Retrofit
Source: KTM_Recall18V033_RCRIT-18V033-5873.pdf
Mandated Torques:Brembo Radial Master Cylinder Clamp Bolts (2x M6): 10 N·m (7.4 lb-ft)Brake Line Banjo Union Bolt (M10×1.0): 25 N·m (18.5 lb-ft)Bleeder Valve Screw (M10×1.0): 10 N·m (7.4 lb-ft)Brake Lever Pivot Screw (M6): 5 N·m (44 in-lb)Brake Lever Pivot Locknut (M6): 10 N·m (88 in-lb)
Consumable Specs:Motorex Brake Fluid DOT 5.1 / DOT 4
Genuine Part Numbers:Brembo 16mm PR16 Hard-Anodized Aluminum Piston Kit (1058444)KTM Hand Brake Cylinder Repair Set (61313008000)KTM Workshop Syringe Tool (50329050000)Copper Seal Ring DIN 7603-10×14×1 (0603100141)
NHTSA Recall 18V-033Brembo Campaign / SIB PR16-Piston

KTM 1290 Super Duke R / GT Brembo Radial Master Cylinder Aluminum Piston

Brembo PR16 radial front master cylinder hard-anodized aluminum piston retrofit, circlip seating, and banjo union torques.

Safety Recall RemedyClamp 10 N·m / Banjo 25 N·m / Bleeder 10 N·m
Genuine Part Numbers:105844461313008000503290500000603100141
22mm BARBREMBO PR16 RADIAL MC16mm Bore / Radial AxisALU PISTONBILLET ALUMINUM PISTONReplaces Cracked Polymer PistonKit Part: 1058444 / 61313008000BANJO BOLT & BLEEDERBanjo: 25 N·m / Bleeder: 10 N·mM10×1.0 with 2x Copper RingsHANDLEBAR CLAMP (2x M6)10 N·m (7.4 lb-ft)Upper Screw Zero-Gap First

Click any component or torque callout above to inspect aluminum piston retrofit instructions and Brembo torque mandates.

Looking for direct-fit parts for this 2024 1290 Super Duke R / EVO?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts
2024 KTM 1290 Super Duke R / EVO Factory Workshop Specs & Maintenance Guide | WowShopper | WowShopper Motorsports