Dedicated Subsystem WorkbenchPlatform Gen: 2016–2026

2025 Kawasaki Ninja ZX-10R Fuse Box Diagram, Amperages & Relay Diagnostics

Complete fuse box location, blade fuse slot mappings, ISO color codes, blown fuse symptoms and dark current parasitic drain testing for 2025 Kawasaki Ninja ZX-10R.

Technical PassportOEM VERIFIED

Engine

998cc

Cooling

Liquid-Cooled

Final Drive

525 Chain

Engine Oil

3.30 L (3.49 US qt)

Spark Plug

NGK SILMAR9B9

Front Tire

120/70ZR17

Browse Flagship Teardowns →

Gen 2016–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2016 through 2026.

Select Model Year:(Active: 2025)
11 Production Years (2016–2026)

2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Suggested Items3 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

CIRCUIT HEALTH DECKMain: 30A Blade / Starter SolenoidSpec: < 1.5 mA Quiescent

FUSE BOX, RELAY ASSIGNMENTS & PARASITIC DRAIN ISOLATOR

Fuse & Relay Location: Fuse box located under rider seat near battery tray; Main 30A fuse mounted directly to starter relay behind left frame cover.

Select Fuse to Inspect Circuits & Failure SymptomsFormat: Mini Blade (ATM)

15A

SLOT: ECU / IGN

Engine Control Unit & Ignition

Rating: 15 Amps

Downstream Protected Components:

ECU LogicIgnition Stick CoilsCam/Crank Sensor Power

Mechanic Diagnostic: Symptoms If Blown

Starter spins engine but no ignition spark is produced.

Shop Replacement Fuses

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2025 Kawasaki Ninja ZX-10R platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins

Bulletin #KAW-18V089Safety Recall MC18-01: Transmission 2nd, 3rd & 4th Gear Impact Fracture & Replacement

Source: Kawasaki_NinjaZX10R_Recall18V089_MC18_01_TransmissionGears.pdf

Mandated Torques:Torque: 130 N·m (95.9 ft·lb, 13.3 kgf·m) (Clutch Hub Nut)Torque: 130 N·m (95.9 ft·lb, 13.3 kgf·m) (Rear Axle Nut)Torque: 60 N·m (44 ft·lb, 6.1 kgf·m) (Rear Sprocket Nuts)Torque: 29 N·m (21 ft·lb, 3.0 kgf·m) (Shift Shaft Return Spring Pin)Torque: 24 N·m (18 ft·lb, 2.4 kgf·m) (Shift Drum Cam Holder Bolt)Torque: 12 N·m (106 in·lb, 1.2 kgf·m) (Gear Positioning Lever Bolt)Torque: 11 N·m (97 in·lb, 1.1 kgf·m) (Clutch Spring Bolts)Torque: 10 N·m (89 in·lb, 1.0 kgf·m) (Clutch Cover Bolts)

Consumable Specs:Molybdenum Disulfide Oil on Gear Shift Dogs & SplinesKawasaki 4-Stroke Engine OilGenuine Transmission Cover Gasket 11061-0735

Genuine Part Numbers:99999-066213262-135613262-135713262-135813262-137992033-1037

TRANSMISSION CASSETTEExploded View: ZX-10R 6-Speed Transmission Gear Stack (Safety Recall 18V-089 / MC18-01)

Kit # 99999-0662 • 130 N·m Hub Nut • 24 N·m Cam • 29 N·m Spring Pin

Drag to Pan•Scroll to Zoom

INSPECTION TARGETRecall 18V-089 / MC18-01

Output Shaft 2nd, 3rd & 4th Gear Stack

Kit # 99999-0662 (Gears 13262-1356, 13262-1357, 13262-1358)

FACTORY WORKSHOP SPECIFICATION:

Critical Recall Replacement Gears

CRITICAL WORKSHOP PROCEDURE:

CRITICAL RECALL COUNTERMEASURE (Recall 18V-089 / Bulletin MC18-01). Original 2nd (31T), 3rd (35T), and 4th (31T) gears fractured under high impact loading during aggressive upshifting. The recall kit installs reinforced gear profiles with heavy-duty shift dogs and new snap rings (92033-1037).

Interactive Assembly Nodes:

Bulletin #KAW-16V102Safety Recall MC16-03: Steering Damper Bracket Mounting Bolt Separation

Source: Kawasaki_NinjaZX10R_Recall16V102_MC16_03_SteeringDamperBracket.pdf

Mandated Torques:Torque: 8.0 N·m (71 in·lb, 0.82 kgf·m) (Steering Damper Bracket Mounting Bolts - Cross-Tightened)

Consumable Specs:High-Strength Replacement Flange Bolts (Included in Bolt Kit)

Genuine Part Numbers:99999-056999924-1509

STEERING & CHASSISExploded View: Steering Damper Bracket & Mounting Bolts (Safety Recall 16V-102 / MC16-03)

Kit # 99999-0569 • 8.0 N·m Cross-Torque • Anti-Pinch Clearance

Drag to Pan•Scroll to Zoom

INSPECTION TARGETRecall 16V-102 / MC16-03

Replacement High-Strength Damper Mounting Bolts (2x)

Genuine Kit # 99999-0569 (Bolt Kit)

FACTORY WORKSHOP SPECIFICATION:

8.0 N·m (71 in·lb, 0.82 kgf·m)

CRITICAL WORKSHOP PROCEDURE:

CRITICAL RECALL REPLACEMENT (Recall 16V-102 / Bulletin MC16-03). Original bolts overtightened at assembly fractured, causing the steering damper bracket to detach from the frame. Replace both bolts: finger-tighten both, torque right bolt to 8.0 N·m, torque left bolt to 8.0 N·m, then re-torque right bolt to 8.0 N·m.