Dedicated Subsystem WorkbenchPlatform Gen: 2014–2026

2026 Indian Motorcycle Chieftain / Roadmaster / Limited / Elite Suspension Hydraulics, Fork Fluids & Sag Tuner

Front fork travel, rear shock travel, spring preload, damping click baselines, and dynamic rider sag calculator for 2026 Indian Motorcycle Chieftain / Roadmaster / Limited / Elite.

Gen 2014–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2014 through 2026.

Select Model Year:(Active: 2026)

2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

1890cc

Drive

Not Available

Cooling

Air-Cooled with Integrated Oil Cooler and Rear Cylinder Deactivation

Official NHTSA Safety Recalls & Technical Bulletins

3 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 3 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #24V550000SUSPENSION:REAR

▼

Defect Description

Polaris Bulletin I-24-07: Rear suspension pushrod on 2024 Chieftain and Roadmaster touring models may buckle under highway or luggage loads.

Safety Hazard / Consequence

Loss of rear ride height, chassis harness pinching, and tire contact hazard.

Factory Remedy & Repair Action

Dealers install reinforced forged steel pushrod countermeasure torqued to 80 N·m.

NHTSA #22V635000EXTERIOR LIGHTING:HEADLIGHTS

▼

NHTSA #18V228000ELECTRICAL SYSTEM:IGNITION

▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

3 Documented Bulletins

Bulletin #I-19-05Safety Recall Bulletin I-19-05 / NHTSA 19V-882: Indian Heavyweight & FTR 1200 10A Circuit Breaker Triad Upgrade (PN 4011371)

Source: RCRIT-19V882-6411.pdf

Mandated Torques:Torque: 8.5 N·m (75 in-lb) (Right V-Cover Chrome Fasteners)Torque: 5 N·m (44 in-lb) (Fuse Box Carrier Bracket Screws)

Consumable Specs:Dielectric Silicone Terminal Grease

Genuine Part Numbers:40113714011371-RD2411993

Recalls 22V-837 & 19V-882Thunderstroke 111 / 116 Platform

Indian Thunderstroke Fuel Pump & 10A Circuit Breaker Architecture

Fuel pump star torque sequence (5 N·m), red-dot circuit breaker triad (PN 4011371), tank mounts (10 N·m), and dual drain plugs (20 N·m).

Click on Fuel Pump Flange, Viton Seal, Tank Mounts, 10A Circuit Breakers, or Dual Drain Plugs to view technical specs.

Bulletin #I-24-07Safety Recall Bulletin I-24-07 / NHTSA 24V-550: Challenger, Pursuit, Chieftain & Springfield Heavy-Duty Rear Suspension Pushrod Replacement

Source: RCAK-24V550-7267.pdf

Mandated Torques:Torque: 80 N·m (59 lb-ft) (Upper & Lower Suspension Pushrod Link Bolts)Torque: 88 N·m (65 lb-ft) (Rear Axle Nut)Torque: 12 N·m (106 in-lb) (Belt Adjuster Jam Nuts)

Consumable Specs:Loctite 243 Medium Strength ThreadlockerMoly Paste 65

Genuine Part Numbers:514489275199827556153

Safety Recall 24V-550 / Bulletin I-24-07PowerPlus 108ci Platform

Indian Challenger & Pursuit Inverted 43mm Fork & Pushrod Architecture

Inverted fork pinch bolts (24 N·m), front axle (75 N·m), Brembo radial calipers (50 N·m), and heavy-duty pushrod link (80 N·m).

Click on Triple Clamps, Front Axle, Rear Pushrod Linkage, or Brembo Caliper to view engineering torque specs.

Bulletin #I-16-02Safety Recall Bulletin I-16-02 / NHTSA 16V-446: Thunderstroke 111/116 3-Cam Engine Misfire & Exhaust Temperature ECM Calibration

Source: RCAK-16V446-3002.pdf

Mandated Torques:Torque: 18 N·m (13.3 lb-ft) (NGK DCPR8E Dual Spark Plugs)Torque: 11 N·m (97 in-lb) (Rocker Arm Carrier & Pushrod Lifter Blocks)Torque: 20 N·m (14.8 lb-ft) (Dual Oil Drain Plugs - Sump & Transmission)

Consumable Specs:Polaris PS-4 Extreme 15W-60 Synthetic Oil (5.20 L)Dielectric Spark Plug Boot Grease

Genuine Part Numbers:NGK DCPR8E54146115414612

Factory Engineering SpecificationThunderstroke 111 / 116 ci

Indian Chief Thunderstroke 3-Cam Gear Train & Pushrod Valvetrain

Helical gear-driven 3-cam valvetrain, zero-lash hydraulic roller lifters, dual-plug heads (18 N·m), and 11 N·m rocker/lifter torque specs.

Click on Crank Pinion, 3-Cam Gears, Hydraulic Lifters, Pushrod Tubes, or Dual Spark Plugs to view technical specs.

Explore Other Subsystems for this 2026 Indian Motorcycle Chieftain / Roadmaster / Limited / Elite

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 5.20 L (5.50 US qt) • Coolant: Air-Cooled Architecture • Brake: N/A

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YTX20HL-BS

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 130/60B19 61H • Rear: 180/60R16 80H

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →

← Return to Full Comprehensive Motorcycle Specification Hub (2026 Indian Motorcycle Chieftain / Roadmaster / Limited / Elite)

Looking for direct-fit parts for this 2026 Chieftain / Roadmaster / Limited / Elite?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts