Dedicated Subsystem WorkbenchPlatform Gen: 2016–2024

2024 Husqvarna 701 Enduro / Supermoto Cylinder Compression & Leakdown Diagnostic Engine

Factory compression specs for 2024 Husqvarna 701 Enduro / Supermoto: standard pressure , service limit PSI, dry vs wet test diagnostics and acoustic leak stethoscope.

Technical PassportOEM VERIFIED

Engine

693cc

Cooling

Not Available

Final Drive

520 Chain

Engine Oil

1.70 L (1.80 US qt)

Spark Plug

NGK LKAR8AI-9 (Center) / NGK LMAR7A-9 (Side)

Front Tire

90/90-21 M/C 54R TT

Browse Flagship Teardowns →

Gen 2016–2024

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2016 through 2024.

Select Model Year:(Active: 2024)
9 Production Years (2016–2024)

2016 2017 2018 2019 2020 2021 2022 2023 2024

Suggested Items4 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2024 Husqvarna 701 Enduro / Supermoto platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #KTM-21V792Safety Recall KTB2112 / HTB2110: 27mm Hydraulic Clutch Slave Cylinder & Bellows Gasket Seal

Source: KTM_Recall21V792_RCMN-21V792-9194.pdf

Mandated Torques:Clutch Slave Cylinder Mounting Screws (3x M6×25): 10 N·m (7.4 lb-ft)Clutch Line Banjo Union Bolt (M6): 6 N·m (4.4 lb-ft)Bleeder Valve on Slave Cylinder: 6 N·m (4.4 lb-ft)Front Engine Sprocket Nut (M20×1.5): 100 N·m (74 lb-ft) w/ Loctite 243Engine Sprocket Case Guard Screws (M6): 6 N·m (4.4 lb-ft)

Consumable Specs:Motorex Hydraulic Fluid 75 / Motorex Brake Fluid DOT 4/5.1

Genuine Part Numbers:Clutch Slave Cylinder DOT Cpl. 27mm (76132061044)Copper Gasket Ring 6×10×1 DIN 7603 (0603061001)HH Collar Screw M6×25 TX30 (0025060256)Push Rod O-Ring 9×1.5 NBR (50332062000)

NHTSA Recall 21V-792Bulletins KTB2112 & HTB2110