Dedicated Subsystem WorkbenchPlatform Gen: 2016–2024

2020 Husqvarna 701 Enduro / Supermoto Fastener Torque Specs & Tightening Matrix

Factory torque specs for 2020 Husqvarna 701 Enduro / Supermoto: oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.

Technical PassportOEM VERIFIED

Engine

693cc

Cooling

Not Available

Final Drive

520 Chain

Engine Oil

1.70 L (1.80 US qt)

Spark Plug

NGK LKAR8AI-9 (Center) / NGK LMAR7A-9 (Side)

Front Tire

90/90-21 M/C 54R TT

Browse Flagship Teardowns →

Gen 2016–2024

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2016 through 2024.

Select Model Year:(Active: 2020)
9 Production Years (2016–2024)

2016 2017 2018 2019 2020 2021 2022 2023 2024

Suggested Items6 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Suggested Items · You Might Be Interested In

Suggested Items & Workshop Consumables for this Fastener & Chassis Torque Job

Task-critical chemicals, precision tools, and replacement consumables dynamically matched to the 2020 Husqvarna 701 Enduro / Supermoto factory engineering specifications.

6 Verified Products Found

CRITICAL THREADLOCKER

PERMATEXIn Stock

PERMATEX Gel Threadlocker - Blue

Prevents critical engine, brake caliper, and sprocket fasteners from backing out under severe harmonic vibration.

$14.99USD

ANTI-SEIZE LUBRICANT

MOTOREXIn Stock

MOTOREX COPPER ANTI-SEIZE SPRAY

Prevents galling, galvanic corrosion, and thread seizure on spark plug threads, exhaust studs, and axle pinch bolts.

$18.50USD

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

PRECISION DRIVE TOOL

JIMSIn Stock

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

Precision chrome vanadium metric drive tool to torque fasteners to factory spec without rounding fastener heads.

$27.90USD

CALIPER REBUILD ESSENTIAL

EBC BRAKESIn Stock

EBC Standard Brake Pads

Direct replacement high-friction pads required when servicing and re-torquing front or rear brake caliper assemblies.

$24.72USD

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

ROTOR & THREAD CLEANER

DRAG SPECIALTIESIn Stock

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

Zero-residue fast-evaporating solvent to strip old thread compound, grease, and brake dust from fastener threads.

$8.95USD

FINAL DRIVE LUBRICANT

MOTULIn Stock

MOTUL CHAIN LUBE ROAD 400ML

High-tack synthetic lubricant required when torquing rear axle nuts and setting final drive chain tension.

$15.00USD

Critical Fastener Torque Tolerances

FSM Certified Specs

Factory workshop tightening torque ratings for axles, calipers, engine plugs, and triple clamps.

Lube:

Fastener / Component	Torque (N·m)	Service Note & Thread Guidance	System
Clutch Slave Cylinder Screws (3x M6x25) M6 x 25• Torx T30 / 8 mm• Loctite 243	10 N·m (7.4 ft-lb)	Recall HTB2110: Inspect bellows seal. Torque evenly to 10 N·m. WARNING: Slave seal degradation leaks mineral oil / DOT 5.1 into engine. Suggested Item:PERMATEX Gel Threadlocker - Blue ($14.99) →	Engine / Drive
Clutch Line Banjo Union Bolt (M6) M6 x 1.0• 8 mm Socket• None (New Copper Washers)	6 N·m (4.4 ft-lb)	MAXIMUM 6 N·m STRICT LIMIT. M6 banjo shears if over-torqued. WARNING: Stripped M6 slave threads require complete slave replacement. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Engine / Drive
Countershaft Sprocket Nut M20 x 1.5• 32 mm Socket• Loctite 243	100 N·m (73.8 ft-lb)	Degrease countershaft splines. Torque to 100 N·m and fold washer tab. WARNING: Unsecured sprocket damages engine countershaft splines. Suggested Item:PERMATEX Gel Threadlocker - Blue ($14.99) →	Engine / Drive
Front Wheel Axle Screw M25 x 1.5• 17 mm Allen• Light grease on shaft	40 N·m (29.5 ft-lb)	Torque axle to 40 N·m, bounce front WP suspension, torque pinch bolts. WARNING: Centers WP front wheel without fork leg stiction. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	wheels
Fork Leg Axle Pinch Screws (4x) M8 x 30• 10 mm Socket• None	15 N·m (11.1 ft-lb)	Torque alternating 3x per side to 15 N·m. WARNING: Over-tightening breaks cast aluminum fork bottoms. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	suspension
Rear Axle Collar Nut M25 x 1.5• 32 mm Socket• None	90 N·m (66.4 ft-lb)	Align chain adjuster hash marks accurately on both sides. WARNING: Skewed rear axle causes accelerated tire and sprocket wear. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	wheels

Technical Standard:Always calibrate torque wrenches prior to critical chassis fastening. Values reflect clean, dry threads unless threadlocker or anti-seize is specifically noted.

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2020 Husqvarna 701 Enduro / Supermoto platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #KTM-21V792Safety Recall KTB2112 / HTB2110: 27mm Hydraulic Clutch Slave Cylinder & Bellows Gasket Seal

Source: KTM_Recall21V792_RCMN-21V792-9194.pdf

Mandated Torques:Clutch Slave Cylinder Mounting Screws (3x M6×25): 10 N·m (7.4 lb-ft)Clutch Line Banjo Union Bolt (M6): 6 N·m (4.4 lb-ft)Bleeder Valve on Slave Cylinder: 6 N·m (4.4 lb-ft)Front Engine Sprocket Nut (M20×1.5): 100 N·m (74 lb-ft) w/ Loctite 243Engine Sprocket Case Guard Screws (M6): 6 N·m (4.4 lb-ft)

Consumable Specs:Motorex Hydraulic Fluid 75 / Motorex Brake Fluid DOT 4/5.1

Genuine Part Numbers:Clutch Slave Cylinder DOT Cpl. 27mm (76132061044)Copper Gasket Ring 6×10×1 DIN 7603 (0603061001)HH Collar Screw M6×25 TX30 (0025060256)Push Rod O-Ring 9×1.5 NBR (50332062000)

NHTSA Recall 21V-792Bulletins KTB2112 & HTB2110