Dedicated Subsystem WorkbenchPlatform Gen: 2007–2016
2015 Harley Davidson Twin Cam 96 / 103 (Dyna / Softail / Touring) Oil Capacities, Coolant & Fluid Specifications
Verified fluid capacities for 2015 Harley Davidson Twin Cam 96 / 103 (Dyna / Softail / Touring): engine oil 3.80 L (4.00 US qt), viscosity 20W-50 V-Twin Motorcycle Oil API CI-4/JASO MA2, coolant , brake fluid, and fork oil levels.
Gen 2007–2016
Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2007 through 2016.
SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available
1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2015 Harley Davidson Twin Cam 96 / 103 (Dyna / Softail / Touring).
Select Model Year:(Active: 2015)
10 Production Years (2007–2016)
Suggested Items4 Verified Workshop Consumables Available for this Job
View Suggested Items ↓Fluids & Service Capacities
Shop Fluids →Engine Oil (Drain & Filter Change)3.80 L (4.00 US qt)
Engine Oil (Drain Only)3.30 L (3.50 US qt)
Recommended Oil Viscosity20W-50 V-Twin Motorcycle Oil API CI-4/JASO MA2
Coolant System CapacityN/A
Brake Fluid StandardDOT 4 Glycol-Based High-Temp (Dry BP ≥ 260°C / Wet BP ≥ 165°C)
Drivetrain, Chain & Gearing
Drive Chain PitchBelt Drive
Chain Link Count140 Links
Front Sprocket Teeth32T
Rear Sprocket Teeth68T
Final Drive ConfigurationCarbon Belt Drive
Ignition & Electrical Specifications
Shop Plugs & Batteries →OEM Spark Plug Part NumberHD 6R12 / Champion RA8HC / NGK DCPR7E
Electrode Spark Plug Gap0.97 - 1.09 mm (0.038 - 0.043 in)
OEM Battery Reference CodeYTX20HL-BS (Dyna/Softail) / YIX30L-BS (Touring)
Battery Output & Rating12V 18Ah/30Ah (310 - 400 CCA)
Spark Plug Inspection Interval10,000 mi (16,000 km) miles
Wheels, Tires & Inflation Pressures
Front Tire Dimensions130/80B17 (Touring) / 100/90-19 (Dyna) / 130/90B16 (Softail)
Cold Front Inflation Pressure36 PSI (Cold)
Rear Tire Dimensions180/65B16 (Touring) / 160/70B17 (Dyna) / 200/55R17 (Fat Boy)
Cold Rear Inflation Pressure40 PSI (Cold)
OEM Wheel Rim Widths (F / R)3.50" / 5.00"
Verified OEM Wheel Fitment: 130/80-17 (F) + 180/65-16 (R)
Shop In-Stock Matched Pairs→Air-Cooled Engine Architecture
Engine Cooling System Hydraulics, Thermostat & Antifreeze Calibration
Air and oil cooling thermal management and fin maintenance for the 2015 Harley Davidson Twin Cam 96 / 103 (Dyna / Softail / Touring).
Cooling Configuration
Air/Oil-Cooled Twin Cam V-Twin with High-Flow Piston Oil Jets
Oil Heat Exchanger: OEM Chin-Mount 6-Row Oil Cooler with Thermostatic Valve
Max Cylinder Head Temp (Infrared)
210°C
Sustained operation above this threshold breaks down engine oil viscosity and glazes cylinder walls.
Engine Oil Drain Plug Torque
24 N·m
Dry-sump / wet-sump drain bolt with fresh crush washer or O-ring.
Spark Plug Cold Torque
20 N·m
Torque into cold aluminum cylinder head to prevent stripped spark plug threads.
Workshop Cooling Fin Maintenance Protocol
Keep chin oil cooler clean and clear of road debris. Inspect oil lines for weeping at crimp fittings. Features Engine Idle Temperature Management System (EITMS) which shuts off rear cylinder fuel injection when cylinder head temperature exceeds 142°C (288°F) at idle. Never use high-pressure pressure washers on cylinder fins or oil coolers as the high-pressure water stream will fold delicate cooling fins flat and restrict engine thermal dissipation.
BRAKING SYSTEM HYDRAULICS, WEAR LIMITS & CALIPER REBUILD MATRIX
Rotor Discard Limits (Tmin) • Caliper Piston Architecture • Pad Compounds • Hydraulic Bleed Specs
FACTORY CERTIFIED SPECIFICATIONS
Front Rotor Discs
300 mm × 5 mm
Discard Limit: 4.5 mm Tmin
Rear Rotor Disc
300 mm × 5.8 mm
Discard Limit: 5.1 mm Tmin
Caliper Architecture
Brembo 4-Piston Fixed Calipers (Dual Front)
Rear: Brembo 4-Piston Caliper with Swingarm Bracket
Hydraulic Fluid Standard
DOT 4 Synthetic Glycol
Dry BP ≥ 260°C • Wet BP ≥ 165°C
Caliper Bolt Torques (NM)
Mount: 45 N·m
Banjo: 27 N·m • Bleed: 10 N·m
Friction Material Lining
Sintered Heavy Touring Compound
Discard Pad at ≤ 1 mm
DIGITAL MICROMETER ROTOR WEAR DIAGNOSTIC GAUGE
Measure rotor friction ring with a pointed blade micrometer to verify safe thermal mass and discard limits
Enter Measured Disc Thickness (mm)
mm
Nominal New: 5.00 mm • Stamped Discard: 4.50 mm Tmin
Quick Benchmark Simulation Presets
Enter your micrometer rotor reading above or click a simulation preset to calculate remaining disc service life and discard safety status.
BRAKE PAD FRICTION COMPOUND & METALLURGY MATRIX
Compare OEM sintered metallic, organic carbon-ceramic, and racing compound friction dynamics
Compound Architecture
Double-H (HH) Sintered Metallic Compound
Friction Rating & Thermal Operating Envelope
HH Rated (μ ≥ 0.55 across cold and hot temperature zones)
0°C – 650°C (32°F – 1,200°F) • Exceptional High-Temp Fade Resistance
Lever Modulation & Initial Cold Bite
Sharp, aggressive initial bite with linear lever feel and minimal thermal hysteresis under repeated heavy slowdowns.
Rotor Wear Index & Wet Weather Recovery
Moderate to high rotor abrasive index. Requires hardened stainless steel rotors; not compatible with cast iron discs. • Superior wet recovery. Metallic sintered composition cuts cleanly through surface water film without delaying pad response.
Application & Recommended Riding Profile
Recommended for modern high-performance street motorcycles, spirited canyon riding, two-up touring, and occasional trackdays.
Hydraulic Fluid Bleeding & Caliper Overhaul Protocol
Hygroscopic Moisture Curve
Glycol brake fluid absorbs 2%–3% atmospheric water annually. Over 24 months, boiling point collapses from 260°C (500°F) to below 165°C (329°F), risking sudden vapor-lock brake loss. Flush fluid every 2 years.
Piston Seal Rollback Function
Caliper square-profile rubber seals flex under pressure to retract pistons ~0.15 mm when pressure drops. Hardened or dirty seals prevent rollback, causing continuous pad drag, glazed rotors, and fuel mileage loss.
Bleeder Torque & Sequence
Bleed master cylinder first, then furthest caliper, then nearest caliper. Tighten bleeder nipples to 10 N·m. Over-tightening permanently shears threads in aluminum calipers.
Direct-Fit Braking Components & Hydraulic Fluids
Authentic double-H sintered pads, replacement floating rotors, and high-temp racing brake fluid
OEM Workshop Archives
2 Documented BulletinsOfficial Factory Service Bulletins & Field Updates
Bulletin #M1524M1524: RECALL 0177 - 2019 - 2021 SPORTSTER - HEADLAMP BULB SHIELD
Source: Harley_M1524_Recall0177.pdfMandated Torques:Torque: 5.8–6 in-lbs (0.66–0.68 N·m) (Bulb Shield Screw)Torque: 35–44 in-lbs (4–5 N·m) (Bracket to Visor Screws)Torque: 10–16 ft-lbs (13.5–21.6 N·m) (Visor Bracket Screws)
Consumable Specs:Loctite 243 Medium Strength Blue Threadlocker (HD Part # 99642-97)
Genuine Part Numbers:68297-05A9150010799642-97
Bulletin #Recall0171Part 573 Safety Recall Report 18V-076: ABS Hydraulic Control Unit Flush & Fluid Replacement
Source: Harley_Recall0171_ABS_4574.pdfMandated Torques:Torque: 17–22 ft-lbs (23.0–30.0 N·m) (ABS Manifold / Caliper Banjo Bolts)Torque: 35–61 in-lbs (4.0–6.9 N·m) (Brake Caliper Bleeder Screws)
Consumable Specs:Harley-Davidson Platinum Label DOT 4 Brake Fluid
Genuine Part Numbers:41731-01
1-Click Factory Service KitOEM Spec Fluid Capacities Matched
Workshop Maintenance Kit & Factory Fluids
Authentic factory-grade motor oil, oil filter, and high-temp brake fluid matched precisely to 2015 Harley Davidson Twin Cam 96 / 103 (Dyna / Softail / Touring) capacities.
Full Kit Subtotal
$53.35
SPECS-TO-CART BUNDLESDedicated Direct-Fit Maintenance Bundles Available
Explore interactive 1-click oil change packs, brake flush kits & major tune-up bundles pre-measured for this 2015 Harley Davidson Twin Cam 96 / 103 (Dyna / Softail / Touring).
Matches factory 20W-50 spec (Oil spec: 3.80 L (4.00 US qt))
Item Price
$47.80($11.95 ea)
DOT 4 Synthetic Formula
EBC High-Performance DOT 4 Synthetic Brake Fluid
8.8 oz (250 ml) Workshop Bottle
Meets & exceeds factory DOT 4 Glycol-Based High-Temp (Dry BP ≥ 260°C / Wet BP ≥ 165°C) specifications
Item Price
$5.55
Factory OEM Spark Plug Spec
HD 6R12 / Champion RA8HC / NGK DCPR7E
Gap: 0.97 - 1.09 mm (0.038 - 0.043 in)
Inspection milestone: 10,000 mi (16,000 km) miles. Exact factory part specification.
Authentic OEM Reference
Search OEM Plugs →Explore Other Subsystems for this 2015 Harley Davidson Twin Cam 96 / 103 (Dyna / Softail / Touring)
Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.
Subsystem Guide/torques
Fastener Torques
Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.
Open Dedicated Workbench →
Subsystem Guide/fuses-relays
Fuses & Relays
Main: 50A Maxi-Fuse • Location: N/A
Open Dedicated Workbench →
Subsystem Guide/compression
Compression & Leakdown
Ratio: 9.6:1 • Std: 165-185 PSI • Limit: 140 PSI
Open Dedicated Workbench →
Subsystem Guide/valves
Valve Clearances
Intake: N/A mm • Exhaust: N/A mm
Open Dedicated Workbench →
Subsystem Guide/fuel-delivery
Fuel Delivery & TB Sync
Idle: N/A • Rail Pressure: N/A • Vacuum: N/A
Open Dedicated Workbench →
Subsystem Guide/electrical
Charging & Battery
Battery: YTX20HL-BS (Dyna/Softail) / YIX30L-BS (Touring) • CCA: 385 • Regulated: 14.2 - 14.8 V DC at 3,000 RPM
Open Dedicated Workbench →
Subsystem Guide/tires
Tires & Gearing
Front: 130/80B17 (Touring) / 100/90-19 (Dyna) / 130/90B16 (Softail) • Rear: 180/65B16 (Touring) / 160/70B17 (Dyna) / 200/55R17 (Fat Boy)
Open Dedicated Workbench →
Subsystem Guide/suspension
Suspension & Sag
Front Travel: 117 mm • Rear Travel: 76 mm
Open Dedicated Workbench →
Subsystem Guide/maintenance
Maintenance Schedule
Oil: Every 5,000 mi (8,000 km) mi • Valves: N/A • Plugs: Every 10,000 mi (16,000 km) mi
Open Dedicated Workbench →
Looking for direct-fit parts for this 2015 Twin Cam 96 / 103 (Dyna / Softail / Touring)?
Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.