Dedicated Subsystem WorkbenchPlatform Gen: 2018–2026

2022 Ducati Panigale V4 Cylinder Compression & Leakdown Diagnostic Engine

Factory compression specs for 2022 Ducati Panigale V4: standard pressure 185 - 235 PSI (1276 - 1620 kPa), service limit 160 PSI, dry vs wet test diagnostics and acoustic leak stethoscope.

Gen 2018–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2018 through 2026.

Select Model Year:(Active: 2022)

2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

1103cc

Drive

525

Cooling

Liquid-Cooled

Cylinder Compression & Leakdown Diagnostic Engine

Multi-Cylinder Dry vs. Wet Test Bench, Differential Pressure Regulator & Acoustic Stethoscope Locator

Ratio: 14.0:1Std: 185-235 PSILimit: 160 PSIWhip Adapter: M10 x 1.0

Diagnostic Presets:

Cyl #1 (Left)IN-SPEC

218PSI(1503 kPa)

Cyl #2IN-SPEC

216PSI(1489 kPa)

Cyl #3IN-SPEC

214PSI(1476 kPa)

Cyl #4 (Right)IN-SPEC

212PSI(1462 kPa)

Cross-Cylinder Variance: Δ 6 PSI (OEM Limit: ≤ 14 PSI)

VARIANCE IN-SPEC

All cylinders demonstrate strong, balanced mechanical sealing. Piston ring packs, cylinder cross-hatch, and valve seats are within factory specification.

Official Workshop Manual Compression Test Protocol

Step 0 of 5 Completed

Step 1: Engine Operating Temperature

Run engine until coolant reaches 60°C - 80°C (140°F - 176°F). Cylinder expansion brings rings and pistons to true operating clearances.

Step 2: Spark Plug Removal & Port Clean

Blow compressed air around spark plug wells to eject grit, then remove all spark plugs. Thread in M10 x 1.0 whip adapter hand-tight with fresh O-ring.

Step 3: Wide-Open Throttle (WOT) Lock

Hold throttle grip fully wide open (or lock throttle bodies open) to eliminate intake butterfly vacuum restriction and ensure 100% volumetric cylinder filling.

Step 4: Battery Tender Voltage Stabilization

Connect a 12V shop battery tender or booster. Starter must sustain uninterrupted cranking speed (350 RPM) to build maximum dynamic stroke pressure.

Step 5: Crank 4-6 Compression Strokes

Engage starter until gauge needle ceases rising (typically 4 to 6 strokes). Record maximum peak pressure and compare against the OEM limits above.

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #25V570000POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT

Received: 03/09/2025▼

Defect Description

Ducati North America (Ducati) is recalling certain 2020-2021 Panigale V4 SL, 2019-2024 Panigale V4 R, 2018-2024 Panigale V4 S, 2023-2025 Streetfighter, 2018-2024 Panigale V4, and 2020-2022 Streetfighter V4 motorcycles. The rear wheel axle could lose its structural integrity and break.

Safety Hazard / Consequence

A rear wheel axle that breaks while riding can result in a loss of motorcycle control, increasing the risk of a crash or injury.

Factory Remedy & Repair Action

Dealers will replace the rear wheel axle, free of charge. Owner notification letters were mailed October 16, 2025. Owners may contact Ducati customer service at 1-888-391-5446. The manufacturer's number for this recall is SRV-RCL-25-002.