Dedicated Subsystem WorkbenchPlatform Gen: 2018–2026

2020 Ducati Panigale V4 / V4 S / V4 R / V4 SP Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2020 Ducati Panigale V4 / V4 S / V4 R / V4 SP: intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Technical PassportOEM VERIFIED

Engine

1103cc

Cooling

Liquid-Cooled

Final Drive

525 (520 on V4 R / SP) Chain

Engine Oil

3.80 L (4.02 US qt)

Spark Plug

NGK RMAR9A-10

Front Tire

120/70 ZR17 (Pirelli Diablo Supercorsa SP V3 / V4)

Gen 2018–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2018 through 2026.

Select Model Year:(Active: 2020)
9 Production Years (2018–2026)

2018 2019 2020 2021 2022 2023 2024 2025 2026

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances

Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.

Adjustment Mechanism: Not Available

Active Valve Range (INTAKE)

Nominal Mid-Spec Target

0.15 mm

Ideal cold lash assembly setting

Shim Diameter / Tappet

Bucket-and-shim interface

Measurement Condition

Cold Engine (≤ 35°C / 95°F)

TDC compression stroke only

Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)

1. Feeler Gauge Measured Clearance (mm)

Factory intake tolerance:

2. Currently Installed Shim (mm)

Measured with micrometer or read laser-etched face

TDC Crankshaft Timing Index

Feeler Gauge Technique

Official NHTSA Safety Recalls & Technical Bulletins

8 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 8 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #26V050000STRUCTURE / POWERTRAIN

Received: 01/01/2021▼

NHTSA #25V570000POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT

Received: 01/01/2021▼

NHTSA #19V382000FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP

Received: 01/01/2021▼

NHTSA #18V854000ENGINE AND ENGINE COOLING:ENGINE

Received: 01/01/2021▼

NHTSA #18V834000ENGINE AND ENGINE COOLING:ENGINE

Received: 01/01/2021▼

NHTSA #18V480000SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:PADS

Received: 01/01/2021▼

NHTSA #18V239000FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Received: 01/01/2021▼

NHTSA #18V238000FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP

Received: 01/01/2021▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

5 Documented Bulletins

Bulletin #SRV-RCL-25-002Safety Recall 25V-570: Panigale V4 & Streetfighter V4 Single-Sided Swingarm Rear Wheel Axle Shaft Replacement

Source: RCLRPT-25V570-3457.pdf

Mandated Torques:Rear Wheel Collar Nut (M48x1.5): 230 N·m ± 5% (55mm 12-point socket, Shell Retinax HD2 grease)Eccentric Hub Pinch Clamp Screws (2x M12): 35 N·m ± 5% (1-2-1 alternating sequence)Rear Sprocket Cush Drive Nuts (6x M10x1.25): 48 N·m ± 5% (Loctite 243)Rear Brake Rotor Screws (4x M8x20): 25 N·m ± 5% (Loctite 270)

Consumable Specs:Shell Retinax HD2 or Gadus high-load axle greaseLoctite 243 medium-strength threadlockerLoctite 270 high-strength threadlocker

Genuine Part Numbers:81920831AA (Recalled Rear Wheel Shaft)81920611A (Recalled Rear Axle Assembly)81920951AA (Countermeasure Rear Wheel Shaft)75010071E (M48x1.5 Wheel Collar Nut)85210571A (Conical Belleville Spring Washer)75990081A (Safety Circlip Hairpin Pin)

NHTSA Recall 25V-570Ducati Campaign SRV-RCL-25-002

Ducati Panigale V4 / Streetfighter V4 Single-Sided Swingarm Rear Wheel Axle Shaft

Structural integrity recall: Replacement of rear wheel shaft (81920831AA / 81920611A), notch effect mitigation, M48 collar nut 230 N·m & eccentric clamp 35 N·m.

Critical Safety CampaignM48 Nut 230 N·m / Eccentric 35 N·m

Genuine Part Numbers:81920831AA81920611A81920951AA75010071E

NHTSA Safety Campaign 25V-570 / Ducati SRV-RCL-25-002Desmosedici Stradale / Single-Sided Swingarm Platform

Bulletin #SRV-RCL-18-006Safety Recall 18V-834 / CR167: Panigale V4 Oil Cooler Output Port Welded Reinforcement & Hose Fittings

Source: RCRIT-18V834-1259.pdf

Mandated Torques:Oil Cooler Delivery & Return Hose Nuts: 15 N·m ± 10% (24mm open crowfoot socket adapter)Oil Cooler Radiator Duct Stud Nuts (2x M6): 5 N·m ± 10%Lower Half-Fairing Screws (M5x14): 4 N·m ± 10%

Consumable Specs:Shell Advance 4T Ultra 15W-50 (0.42 L top-up quantity)Klüberplus S 06/100 rubber vibration isolator assembly lubricantClean engine oil for Viton O-rings

Genuine Part Numbers:54811364A (Countermeasure Oil Cooler with Welded Gusset Plates)88641321A (Viton Fluoroelastomer O-Ring Seals, 4x)71314901A (Vibration Damper Spacers with Collar, 2x)

NHTSA Recall 18V-834Ducati Campaign SRV-RCL-18-006 / CR167

Ducati Panigale V4 Oil Cooler Output Port Reinforcement & Hose Fittings

Countermeasure cooler (54811364A) with dual welded port reinforcement plates, 24mm union nuts 15 N·m, duct mounts 5 N·m & 0.42L top-up.

Thermal Reliability UpdateHose Unions 15 N·m / Mounts 5 N·m

Recall Countermeasure Kit:54811364A88641321A71314901A

NHTSA Safety Campaign 18V-834 / Ducati SRV-RCL-18-006 / CR167Panigale V4 / V4 S / V4 Speciale (2018–2019)

Bulletin #SRV-RCL-18-008Safety Recall 18V-854 / CR169: Desmosedici Stradale Hydraulic Timing Chain Tensioner Torque Revision

Source: RCRIT-18V854-6810.pdf

Mandated Torques:Front Bank Hydraulic Chain Tensioner: 50 N·m ± 5% (27mm 12-point box socket, revised from 30 Nm)Rear Bank Hydraulic Chain Tensioner: 50 N·m ± 5% (27mm 12-point box socket, revised from 30 Nm)Left Fairing Puller Screws (M5x12): 5 N·m ± 10%

Consumable Specs:None (dry threads; interference crush washer A seated on tensioner body)

Genuine Part Numbers:42610491A (Hydraulic Chain Tensioner Assembly with Washer A)Washer A (Interference-fit seal ring; replace complete tensioner if missing)

NHTSA Recall 18V-854Ducati Campaign SRV-RCL-18-008 / CR169

Ducati Desmosedici Stradale Hydraulic Timing Chain Tensioner Sealing

Front and rear bank hydraulic chain tensioner torque revision: 50 N·m (increased from 30 N·m), 27mm 12-point socket & washer inspection.

Torque Revision Campaign50 N·m (27mm Box Socket)

NHTSA Safety Campaign 18V-854 / Ducati SRV-RCL-18-008 / CR169Desmosedici Stradale V4 1103cc / 998cc Platform

Bulletin #SRV-RCL-19-001Safety Recall 19V-382 & 18V-238 / CR177: Panigale V4 Fuel Tank Filler Cap Venting System & Check Ball Deletion

Source: RCSB-19V382-9239.pdf

Mandated Torques:Valve Block Fastening Screws (2x Torx T10): 0.9 N·mFiller Plug Outer Ring Screws (4x M5x16): 4 N·m ± 10%Fuel Tank Front Pivot Screw (M6x20): 10 N·m ± 10%

Consumable Specs:None

Genuine Part Numbers:43314761A (Fuel Tank Warning Decal: Fuel spray may cause injury, Open slowly)43314751A (Owner's Manual Rider Handbook Addendum Page)Check Ball 7 (Permanently extracted and deleted from valve chamber)

NHTSA Recall 19V-382 & 18V-238Ducati Campaign SRV-RCL-19-001 / CR177

Ducati Panigale V4 Fuel Tank Filler Cap Venting & Pressure Relief System

Fuel pressurization countermeasure: Valve block check ball removal, Torx T10 0.9 N·m, M5 ring screws 4 N·m & decal 43314761A.

Fuel Safety RecallCap Screws 4 N·m / Valve 0.9 N·m

Campaign Components:43314761A43314751ACheck Ball RemovalDDS 2.0 Global Scan

NHTSA Safety Campaign 19V-382 / 18V-238 / Ducati SRV-RCL-19-001Panigale V4 (all variants 2018–2019)

Bulletin #SRV-RCL-26-001Safety Recall 26V-050: Panigale V4 & Streetfighter V4 Rear Brake Line Heat Shield Protection

Source: RCLRPT-26V050.pdf

Mandated Torques:Rear Brake Line Banjo Screws: 25 N·m ± 5%Heat Shield Retaining Bracket Screws: 5 N·m ± 10%

Consumable Specs:DOT 4 Brake FluidThermal Shield Reflective Sleeve

Genuine Part Numbers:High-temperature thermal reflective sleeve assemblyCopper crush sealing washers

Explore Other Subsystems for this 2020 Ducati Panigale V4 / V4 S / V4 R / V4 SP

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 3.80 L (4.02 US qt) • Coolant: 2.60 L (2.75 US qt) • Brake: DOT 4 (Brembo HTC 64T / Motul RBF 660 for track)

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: 14.0:1 • Std: 185-235 PSI • Limit: 160 PSI

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YT12B-BS (12V 10Ah) / Lithium-Ion (12V 4Ah, OEM 66920031A on V4 S / SP / R)

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 120/70 ZR17 (Pirelli Diablo Supercorsa SP V3 / V4) • Rear: 200/60 ZR17 (Pirelli Diablo Supercorsa SP V3 / V4)

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: 120 mm • Rear Travel: 130 mm

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: Every 7,500 miles (12,000 km) mi • Valves: N/A • Plugs: Every 15,000 miles (24,000 km) mi

Open Dedicated Workbench →

← Return to Full Comprehensive Motorcycle Specification Hub (2020 Ducati Panigale V4 / V4 S / V4 R / V4 SP)

Looking for direct-fit parts for this 2020 Panigale V4 / V4 S / V4 R / V4 SP?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts