Dedicated Subsystem WorkbenchPlatform Gen: 2018–2026

2018 Ducati Panigale V4 Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2018 Ducati Panigale V4: intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Gen 2018–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2018 through 2026.

Select Model Year:(Active: 2018)

2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

1103cc

Drive

525

Cooling

Liquid-Cooled

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances

Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.

Adjustment Mechanism: 9.48 mm

Active Valve Range (INTAKE)

0.12 - 0.20 mm

0.005 - 0.008 in

Nominal Mid-Spec Target

0.16 mm

Ideal cold lash assembly setting

Shim Diameter / Tappet

9.48 mm

Bucket-and-shim interface

Measurement Condition

Cold Engine (≤ 35°C / 95°F)

TDC compression stroke only

Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)

1. Feeler Gauge Measured Clearance (mm)

Factory intake tolerance: 0.12 - 0.20 mm

2. Currently Installed Shim (mm)

Measured with micrometer or read laser-etched face

TDC Crankshaft Timing Index

Align crankshaft TDC mark with engine timing index pointer

Feeler Gauge Technique

Angled blade feeler gauge (cold engine ≤ 35°C / 95°F)

Official NHTSA Safety Recalls & Technical Bulletins

6 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 6 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #19V382000FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP

Received: 20/05/2019▼

Defect Description

Ducati North America (Ducati) is recalling certain 2018-2019 Panigale V4, Panigale V4 S, Panigale Speciale, and 2019 Panigale R motorcycles. Excessive pressure in the fuel tank may cause fuel to spray when opening the fuel cap.

Safety Hazard / Consequence

Fuel spray can increase the risk of injury and a fuel leak in the presence of an ignition source can increase the risk of a fire.

Factory Remedy & Repair Action

Ducati will notify owners, and dealers will update the fuel cap venting system, provide an updated page for the owner's manual, and affix a warning label decal to the fuel tank, free of charge. The recall began July 9, 2019. Owners may contact Ducati customer service at 1-888-391-5446. Ducati's number for this recall is SRV-RCL-19-001. Note: This recall includes motorcycles that may have been previously remedied under recall 18V-238 for a similar issue.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

NHTSA #18V480000SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:PADS

Received: 19/07/2018▼

NHTSA #18V854000ENGINE AND ENGINE COOLING:ENGINE

Received: 30/11/2018▼

NHTSA #18V834000ENGINE AND ENGINE COOLING:ENGINE

Received: 27/11/2018▼

NHTSA #18V239000FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

Received: 16/04/2018▼

NHTSA #18V238000FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY:FILLER PIPE AND CAP

Received: 16/04/2018▼