Dedicated Subsystem WorkbenchPlatform Gen: 2016–2026

2026 Aprilia RSV4 1100 Factory / RR / RF / 1000 Oil Capacities, Coolant & Fluid Specifications

Verified fluid capacities for 2026 Aprilia RSV4 1100 Factory / RR / RF / 1000: engine oil 4.00 L (4.23 US qt), viscosity Castrol POWER1 5W-40 / 10W-50 API SN / JASO MA2, coolant 2.50 L (2.64 US qt), brake fluid, and fork oil levels.

Technical PassportOEM VERIFIED

Engine

1099cc

Cooling

Liquid-Cooled

Final Drive

525 Chain

Engine Oil

4.00 L (4.23 US qt)

Spark Plug

NGK CR9EKB

Front Tire

120/70 ZR17 (Pirelli Diablo Supercorsa SP V3 / V4)

Browse Flagship Teardowns →

Gen 2016–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2016 through 2026.

Select Model Year:(Active: 2026)
11 Production Years (2016–2026)

2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Suggested Items4 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Fluids & Service Capacities

Shop Fluids →

Engine Oil (Drain & Filter Change)4.00 L (4.23 US qt)

Engine Oil (Drain Only)3.60 L (3.80 US qt)

Recommended Oil ViscosityCastrol POWER1 5W-40 / 10W-50 API SN / JASO MA2

Coolant System Capacity2.50 L (2.64 US qt)

Brake Fluid StandardDOT 4 (Brembo Racing HTC 64T)

Drivetrain, Chain & Gearing

Gearing Calculator →Shop Chains & Sprockets →

Drive Chain Pitch525

Chain Link Count110 Links

Front Sprocket Teeth16T

Rear Sprocket Teeth41T

Final Drive Configuration525 Pitch Chain

Ignition & Electrical Specifications

Shop Plugs & Batteries →

OEM Spark Plug Part NumberNGK CR9EKB

Electrode Spark Plug Gap0.7 - 0.8 mm (0.028 - 0.031 in)

OEM Battery Reference CodeYT12A-BS (12V 10Ah) / Factory Lithium-Ion LiFePO4

Battery Output & RatingNot Available

Spark Plug Inspection IntervalN/A

Wheels, Tires & Inflation Pressures

Matched 2-Tire Sets →

Front Tire Dimensions120/70 ZR17 (Pirelli Diablo Supercorsa SP V3 / V4)

Cold Front Inflation PressureN/A

Rear Tire Dimensions200/55 ZR17

Cold Rear Inflation PressureN/A

OEM Wheel Rim Widths (F / R)3.50" / 5.50"

Verified OEM Wheel Fitment: 120/70-17 (F) + 200/55-17 (R)

Shop In-Stock Matched Pairs→

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2026 Aprilia RSV4 1100 Factory / RR / RF / 1000 platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins

Bulletin #PA2ZZQ2001Safety Recall 20V-245 / PA2ZZQ2001: RSV4 & Tuono V4 Brembo Stylema / M50 Front Brake Pad Compound Replacement

Source: RCLRPT-20V245-6783.PDF

Mandated Torques:Brembo Radial Front Caliper Mounting Bolts (4x M10×1.25): 50 N·m (37 lb-ft) (dry threads)Brembo Brake Pad Retaining Slide Pin (M10 Hex): 20 N·m (14.8 lb-ft)Front Wheel Axle Spindle Bolt (M25): 65 N·m (48 lb-ft)Front Axle Fork Bottom Pinch Bolts (4x M8): 12 N·m (106 in-lb)

Consumable Specs:Castrol React Performance DOT 4 Brake FluidBrembo Caliper High-Temp Synthetic Pin Lube

Genuine Part Numbers:2B006883 (Upgraded Sintered Front Brake Pad Set - Left)2B006884 (Upgraded Sintered Front Brake Pad Set - Right)2B003310 (Pad Retaining Bridge Clip)

Safety Recall 20V-245 / PA2ZZQ2001RSV4 & Tuono V4 Superbike Platform

Aprilia RSV4 & Tuono V4 Brembo Radial Caliper & Sintered Brake Pad Assembly

Service specification: Radial mounting bolts 50 N·m dry, slide pin 20 N·m, 330mm disc min thickness 4.5mm, and upgraded sintered pads.

Component Specification & Recall Protocol

Click any labeled component in the schematic above to inspect radial bolt torque, pad retaining pin, and 330mm rotor service limits.

Bulletin #PA2ZZQ1706Safety Recall 17V-811 / PA2ZZQ1706: RSV4 & Tuono V4 Brembo Radial Front Master Cylinder Aluminum Piston Upgrade

Source: RCLRPT-17V811-5849.PDF

Mandated Torques:Hand Brake Lever Pivot Bolt & Locknut: 5–7 N·m (44–62 in-lb)Master Cylinder Integrated Bleeder Screw: 5–7 N·m (44–62 in-lb)Master Cylinder Handlebar Clamp Screws (2x M6): 8–10 N·m (71–89 in-lb) (tighten top bolt first zero gap)Hydraulic Brake Line Banjo Bolt (M10×1.0): 22–25 N·m (16–18 lb-ft)

Consumable Specs:Castrol DOT 4 Synthetic Brake Fluid2x Pure Copper Banjo Crush WashersSilicone Master Cylinder Assembly Fluid

Genuine Part Numbers:1058444 (Brembo PR16 Hard-Anodized Aluminum Piston & Seal Kit)2B004944 (Aprilia Master Cylinder Overhaul Kit)890825 (Copper Crush Washers M10)

Safety Recall 17V-811 / FMVSS 122RSV4 1000 & Tuono V4 1100

Aprilia Brembo PR16 Radial Master Cylinder Aluminum Piston Upgrade

Countermeasure protocol: Hard-anodized aluminum piston replacement, zero-gap handlebar clamp sequence (10 N·m), and banjo union 25 N·m.

Component Specification & Recall Protocol

Click any labeled component in the schematic above to inspect aluminum piston retrofit, zero-gap handlebar clamp torque, and hydraulic fittings.

1-Click Factory Service KitOEM Spec Fluid Capacities Matched

Workshop Maintenance Kit & Factory Fluids

Authentic factory-grade motor oil, oil filter, and high-temp brake fluid matched precisely to 2026 Aprilia RSV4 1100 Factory / RR / RF / 1000 capacities.

Full Kit Subtotal

$53.35

5W-40 Full Synthetic 4T

Silkolene Snow 4T Engine Oil 5W-40 (1 Liter)

1-Liter Bottles (x4 Included)

Matches factory 5W-40 spec (Oil spec: 4.00 L (4.23 US qt))

Item Price

$47.80($11.95 ea)

DOT 4 Synthetic Formula

EBC High-Performance DOT 4 Synthetic Brake Fluid

8.8 oz (250 ml) Workshop Bottle

Meets & exceeds factory DOT 4 (Brembo Racing HTC 64T) specifications

Item Price

$5.55

Factory OEM Spark Plug Spec

NGK CR9EKB

Gap: 0.7 - 0.8 mm (0.028 - 0.031 in)

Inspection milestone: Not Available. Exact factory part specification.

Authentic OEM Reference

Search OEM Plugs →

Complete Workshop Maintenance Package3 Essential Service Items

Includes 5W-40 Full Synthetic 4T engine oil (1-Liter Bottles (x4 Included)), high-flow filter & DOT 4 fluid.

Kit Total

$53.35

Explore Other Subsystems for this 2026 Aprilia RSV4 1100 Factory / RR / RF / 1000

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YT12A-BS (12V 10Ah) / Factory Lithium-Ion LiFePO4

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 120/70 ZR17 (Pirelli Diablo Supercorsa SP V3 / V4) • Rear: 200/55 ZR17

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →

← Return to Full Comprehensive Motorcycle Specification Hub (2026 Aprilia RSV4 1100 Factory / RR / RF / 1000)

Looking for direct-fit parts for this 2026 RSV4 1100 Factory / RR / RF / 1000?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts