Factory Workshop SpecificationsPlatform Gen: 2016–2026

2026 Aprilia RSV4 1100 Factory / RR / RF / 1000 Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Gen 2016–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2016 through 2026.

Select Model Year:(Active: 2026)

2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

1099cc

Drive

525

Cooling

Liquid-Cooled

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2026 Aprilia RSV4 1100 Factory / RR / RF / 1000.

10 Dedicated Engineering Spoke Pages

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 4.00 L (4.23 US qt) • Coolant: 2.50 L (2.64 US qt) • Brake: DOT 4 (Brembo Racing HTC 64T)

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YT12A-BS (12V 10Ah) / Factory Lithium-Ion LiFePO4

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 120/70 ZR17 (Pirelli Diablo Supercorsa SP V3 / V4) • Rear: 200/55 ZR17

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →

Fluids & Service Capacities

Shop Fluids →

Engine Oil (Drain & Filter Change)4.00 L (4.23 US qt)

Engine Oil (Drain Only)3.60 L (3.80 US qt)

Recommended Oil ViscosityCastrol POWER1 5W-40 / 10W-50 API SN / JASO MA2

Coolant System Capacity2.50 L (2.64 US qt)

Brake Fluid StandardDOT 4 (Brembo Racing HTC 64T)

Drivetrain, Chain & Gearing

Gearing Calculator →Shop Chains & Sprockets →

Drive Chain Pitch525

Chain Link Count110 Links

Front Sprocket Teeth16T

Rear Sprocket Teeth41T

Final Drive Configuration525 Pitch Chain

Ignition & Electrical Specifications

Shop Plugs & Batteries →

OEM Spark Plug Part NumberNGK CR9EKB

Electrode Spark Plug Gap0.7 - 0.8 mm (0.028 - 0.031 in)

OEM Battery Reference CodeYT12A-BS (12V 10Ah) / Factory Lithium-Ion LiFePO4

Battery Output & RatingNot Available

Spark Plug Inspection IntervalN/A

Wheels, Tires & Inflation Pressures

Shop Tires →

Front Tire Dimensions120/70 ZR17 (Pirelli Diablo Supercorsa SP V3 / V4)

Cold Front Inflation PressureN/A

Rear Tire Dimensions200/55 ZR17

Cold Rear Inflation PressureN/A

OEM Wheel Rim Widths (F / R)3.50" / 5.50"

Official NHTSA Safety Recalls & Technical Bulletins

2 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 2 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #20V245000SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:PADS

Received: 04/28/2020▼

Defect Description

Piaggio Safety Recall PA2ZZQ2001: Front brake pads with high nickel sintered material may delaminate from the steel backing plate under severe thermal load.

Safety Hazard / Consequence

Friction material delamination results in sudden reduced braking efficiency and increased stopping distances.

Factory Remedy & Repair Action

Dealers will replace front brake pads with upgraded sintered compound pads (2B006883 / 2B006884) free of charge. Caliper bolts 50 N·m dry.

Manufacturer Notes: Piaggio Campaign Number PA2ZZQ2001. NHTSA Recall 20V-245.

NHTSA #17V811000SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

Received: 12/15/2017▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins

Bulletin #PA2ZZQ2001Safety Recall 20V-245 / PA2ZZQ2001: RSV4 & Tuono V4 Brembo Stylema / M50 Front Brake Pad Compound Replacement

Source: RCLRPT-20V245-6783.PDF

Mandated Torques:Brembo Radial Front Caliper Mounting Bolts (4x M10×1.25): 50 N·m (37 lb-ft) (dry threads)Brembo Brake Pad Retaining Slide Pin (M10 Hex): 20 N·m (14.8 lb-ft)Front Wheel Axle Spindle Bolt (M25): 65 N·m (48 lb-ft)Front Axle Fork Bottom Pinch Bolts (4x M8): 12 N·m (106 in-lb)

Consumable Specs:Castrol React Performance DOT 4 Brake FluidBrembo Caliper High-Temp Synthetic Pin Lube

Genuine Part Numbers:2B006883 (Upgraded Sintered Front Brake Pad Set - Left)2B006884 (Upgraded Sintered Front Brake Pad Set - Right)2B003310 (Pad Retaining Bridge Clip)

Safety Recall 20V-245 / PA2ZZQ2001RSV4 & Tuono V4 Superbike Platform

Aprilia RSV4 & Tuono V4 Brembo Radial Caliper & Sintered Brake Pad Assembly

Service specification: Radial mounting bolts 50 N·m dry, slide pin 20 N·m, 330mm disc min thickness 4.5mm, and upgraded sintered pads.

Component Specification & Recall Protocol

Click any labeled component in the schematic above to inspect radial bolt torque, pad retaining pin, and 330mm rotor service limits.

Bulletin #PA2ZZQ1706Safety Recall 17V-811 / PA2ZZQ1706: RSV4 & Tuono V4 Brembo Radial Front Master Cylinder Aluminum Piston Upgrade

Source: RCLRPT-17V811-5849.PDF

Mandated Torques:Hand Brake Lever Pivot Bolt & Locknut: 5–7 N·m (44–62 in-lb)Master Cylinder Integrated Bleeder Screw: 5–7 N·m (44–62 in-lb)Master Cylinder Handlebar Clamp Screws (2x M6): 8–10 N·m (71–89 in-lb) (tighten top bolt first zero gap)Hydraulic Brake Line Banjo Bolt (M10×1.0): 22–25 N·m (16–18 lb-ft)

Consumable Specs:Castrol DOT 4 Synthetic Brake Fluid2x Pure Copper Banjo Crush WashersSilicone Master Cylinder Assembly Fluid

Genuine Part Numbers:1058444 (Brembo PR16 Hard-Anodized Aluminum Piston & Seal Kit)2B004944 (Aprilia Master Cylinder Overhaul Kit)890825 (Copper Crush Washers M10)

Safety Recall 17V-811 / FMVSS 122RSV4 1000 & Tuono V4 1100

Aprilia Brembo PR16 Radial Master Cylinder Aluminum Piston Upgrade

Countermeasure protocol: Hard-anodized aluminum piston replacement, zero-gap handlebar clamp sequence (10 N·m), and banjo union 25 N·m.

Component Specification & Recall Protocol

Click any labeled component in the schematic above to inspect aluminum piston retrofit, zero-gap handlebar clamp torque, and hydraulic fittings.

Looking for direct-fit parts for this 2026 RSV4 1100 Factory / RR / RF / 1000?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts