Factory Workshop SpecificationsPlatform Gen: 2008–2020

2008 Yamaha YZF-R6 Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Technical PassportOEM VERIFIED

Engine

599cc

Cooling

Liquid-Cooled

Final Drive

525 Chain

Engine Oil

2.60 L (2.75 US qt)

Spark Plug

NGK CR10EK

Front Tire

120/70ZR17

Gen 2008–2020

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2008 through 2020.

Select Model Year:(Active: 2008)
13 Production Years (2008–2020)

2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2008 Yamaha YZF-R6.

10 Dedicated Engineering Spoke Pages

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 2.60 L (2.75 US qt) • Coolant: 2.30 L (2.43 US qt) • Brake: DOT 4

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: 30A Blade • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: 13.1:1 • Std: 175-225 PSI • Limit: 150 PSI

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YTZ10S • CCA: 190 • Regulated: 14.2 - 14.8 V DC (at 5,000 RPM with High Beam)

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 120/70ZR17 • Rear: 180/55ZR17

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: 120 mm • Rear Travel: 120 mm

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: Every 3,000 miles (5,000 km) mi • Valves: N/A • Plugs: Every 8,000 miles (13,000 km) mi

Open Dedicated Workbench →

Fluids & Service Capacities

Shop Fluids →

Engine Oil (Drain & Filter Change)2.60 L (2.75 US qt)

Engine Oil (Drain Only)2.40 L (2.54 US qt)

Recommended Oil Viscosity10W-40 API SG or higher, JASO MA2

Coolant System Capacity2.30 L (2.43 US qt)

Brake Fluid StandardDOT 4

Drivetrain, Chain & Gearing

Gearing Calculator →Shop Chains & Sprockets →

Drive Chain Pitch525

Chain Link Count114 Links

Front Sprocket Teeth16T

Rear Sprocket Teeth45T

Final Drive Configuration525 Pitch Chain

Ignition & Electrical Specifications

Shop Plugs & Batteries →

OEM Spark Plug Part NumberNGK CR10EK

Electrode Spark Plug Gap0.6 - 0.7 mm (0.024 - 0.028 in)

OEM Battery Reference CodeYTZ10S

Battery Output & Rating12V 8.6Ah 190 CCA

Spark Plug Inspection Interval8,000 miles (13,000 km) miles

Wheels, Tires & Inflation Pressures

Matched 2-Tire Sets →

Front Tire Dimensions120/70ZR17

Cold Front Inflation Pressure36 PSI (Cold)

Rear Tire Dimensions180/55ZR17

Cold Rear Inflation Pressure42 PSI (Cold)

OEM Wheel Rim Widths (F / R)3.50" / 5.50"

Verified OEM Wheel Fitment: 120/70-17 (F) + 180/55-17 (R)

Shop In-Stock Matched Pairs→

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #10V365000EXTERIOR LIGHTING

Received: 05/08/2010▼

Defect Description

YAMAHA IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2010 YZF-R6 MOTORCYCLES MANUFACTURED FROM AUGUST 2005 THROUGH MARCH 2010. THE MOTORCYCLE'S FRONT SIDE REFLECTOR WAS NOT PLACED AT THE PROPER HEIGHT WHICH FAILS TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

Safety Hazard / Consequence

VISIBILITY OF THE MOTORCYCLE WILL BE DECREASED, POSSIBLY INCREASING THE RISK OF A CRASH.

Factory Remedy & Repair Action

YAMAHA WILL NOTIFY OWNERS AND DEALERS WILL REPAIR THE MOTORCYCLES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 12, 2010. OWNERS MAY CONTACT YAMAHA AT 1-800-962-7926.

Manufacturer Notes: OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO <A HREF=HTTP://WWW.SAFERCAR.GOV>HTTP://WWW.SAFERCAR.GOV</A> .

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #YAM-15V176Safety Recall 15V-176: FZ-09 / MT-09 / YZF-R6 Shift Cam Segment Stopper & Shift Shaft Assembly

Source: Yamaha_FZ09_MT09_R6_Recall_ShiftCamStopper.pdf

Mandated Torques:Hand-Tool Torque Mandate: Air tools strictly forbidden on YZF-R6 slipper clutch boss nut to prevent mainshaft thread strippingBlue Paint Identification Dot on shift shaft end denotes campaign completion

Consumable Specs:Yamalube 4T Engine OilLithium Soap-Based Grease for Oil Seal Lips

Genuine Part Numbers:90891-10251-001RC-18101-01-001RC-15461-00-0090891-10254-002C0-18101-02-002C0-15461-01-00

Transmission MechanismExploded View: Shift Cam Segment Stopper & Shift Shaft (Safety Recall 15V-176)

Sharp Notch vs. Smooth Radius Defect • Blue Paint Identification Dot

Click any component or inspection mark to view recall remedy specifications.

Inspection TargetRecall 15V-176

Shift Cam Segment Stopper (Sharp vs. Smooth Bend)

Kit # 90891-10251-00 (FZ09) / 90891-10254-00 (R6)

Mechanical Engineering Status:RECALL 15V-176 DEFECT LOCUS

CRITICAL RECALL DEFECT: The original factory stopper arm was stamped with an acute sharp internal notch at the bend. Under rapid gear shifts, cyclic fatigue caused catastrophic fracture at the notch. The countermeasure part features an engineered smooth radial bend that distributes stress evenly.

Interactive Assembly Nodes:

1-Click Factory Service KitOEM Spec Fluid Capacities Matched

Workshop Maintenance Kit & Factory Fluids

Authentic factory-grade motor oil, oil filter, and high-temp brake fluid matched precisely to 2008 Yamaha YZF-R6 capacities.

Full Kit Subtotal

$74.50

10W-40 JASO MA2

Silkolene Pro 4 4T Synthetic Oil 10W-40 (4 Liter)

4-Liter Factory Full Jug

Matches factory 10W-40 spec (Oil spec: 2.60 L (2.75 US qt))

Item Price

$68.95

DOT 4 Synthetic Formula

EBC High-Performance DOT 4 Synthetic Brake Fluid

8.8 oz (250 ml) Workshop Bottle

Meets & exceeds factory DOT 4 specifications

Item Price

$5.55

Factory OEM Spark Plug Spec

NGK CR10EK

Gap: 0.6 - 0.7 mm (0.024 - 0.028 in)

Inspection milestone: 8,000 miles (13,000 km) miles. Exact factory part specification.

Authentic OEM Reference

Search OEM Plugs →

Complete Workshop Maintenance Package3 Essential Service Items

Includes 10W-40 JASO MA2 engine oil (4-Liter Factory Full Jug), high-flow filter & DOT 4 fluid.

Kit Total

$74.50

Looking for direct-fit parts for this 2008 YZF-R6?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts