Dedicated Subsystem WorkbenchPlatform Gen: 2018–2026

sms%3A6572176457 Yamaha XMAX 300 (CZR300) Fastener Torque Specs & Tightening Matrix

Factory torque specs for sms%3A6572176457 Yamaha XMAX 300 (CZR300): oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.

Technical PassportOEM VERIFIED

Engine

292cc

Cooling

Liquid-Cooled with Front High-Efficiency Radiator & Electric Fan

Final Drive

Belt Drive

Engine Oil

1.70 L (1.80 US qt) [1.50 L periodic oil change without filter]

Spark Plug

NGK LMAR8A-9

Front Tire

120/70-15 M/C 56P

Browse Flagship Teardowns →

Gen 2018–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2018 through 2026.

Select Model Year:(Active: sms%3A6572176457)
9 Production Years (2018–2026)

2018 2019 2020 2021 2022 2023 2024 2025 2026

Suggested Items6 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Suggested Items · You Might Be Interested In

Suggested Items & Workshop Consumables for this Fastener & Chassis Torque Job

Task-critical chemicals, precision tools, and replacement consumables dynamically matched to the sms%3A6572176457 Yamaha XMAX 300 (CZR300) factory engineering specifications.

6 Verified Products Found

CRITICAL THREADLOCKER

PERMATEXIn Stock

PERMATEX Gel Threadlocker - Blue

Prevents critical engine, brake caliper, and sprocket fasteners from backing out under severe harmonic vibration.

$14.99USD

ANTI-SEIZE LUBRICANT

MOTOREXIn Stock

MOTOREX COPPER ANTI-SEIZE SPRAY

Prevents galling, galvanic corrosion, and thread seizure on spark plug threads, exhaust studs, and axle pinch bolts.

$18.50USD

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

PRECISION DRIVE TOOL

JIMSIn Stock

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

Precision chrome vanadium metric drive tool to torque fasteners to factory spec without rounding fastener heads.

$27.90USD

CALIPER REBUILD ESSENTIAL

EBC BRAKESIn Stock

EBC Standard Brake Pads

Direct replacement high-friction pads required when servicing and re-torquing front or rear brake caliper assemblies.

$24.72USD

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

ROTOR & THREAD CLEANER

DRAG SPECIALTIESIn Stock

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

Zero-residue fast-evaporating solvent to strip old thread compound, grease, and brake dust from fastener threads.

$8.95USD

FINAL DRIVE LUBRICANT

MOTULIn Stock

MOTUL CHAIN LUBE ROAD 400ML

High-tack synthetic lubricant required when torquing rear axle nuts and setting final drive chain tension.

$15.00USD

Critical Fastener Torque Tolerances

FSM Certified Specs

Factory workshop tightening torque ratings for axles, calipers, engine plugs, and triple clamps.

Lube:

Fastener / Component	Torque (N·m)	Service Note & Thread Guidance	System
No fasteners matching '' found in this category.

Technical Standard:Always calibrate torque wrenches prior to critical chassis fastening. Values reflect clean, dry threads unless threadlocker or anti-seize is specifically noted.

Official NHTSA Safety Recalls & Technical Bulletins

2 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 2 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #ENGINE AND ENGINE COOLING:ENGINE

▼

Defect Description

Yamaha Motor Corporation, USA is recalling certain 2024-2025 CZR300 (XMAX 300) scooters. The camshaft retainer bolt may not have been tightened properly, which can allow the bolt to loosen and back out.

Safety Hazard / Consequence

A loose camshaft retainer bolt can cause abnormal engine noise, timing misalignment, loss of power, or engine stall while riding, increasing the risk of a crash.

Factory Remedy & Repair Action

Dealers will inspect the camshaft retainer bolt and tighten or replace it as necessary to the 10 N·m specification with threadlocker, free of charge.

Manufacturer Notes: NHTSA Campaign 25V-778; owner notifications initiated in late 2024.

NHTSA #VISIBILITY:REFLEX REFLECTOR

▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #FSB-YAM-XMX-01Safety Recall Bulletin FSB-YAM-XMX-01 / NHTSA 25V-778: Camshaft Retainer Bolt Security Verification, Blue Core Valve Clearances & CVT High-Torque Sheave Service

Source: Yamaha_XMAX300_NHTSA_25V778_Camshaft_Bolt_Service.pdf

Mandated Torques:Torque: 10 N·m (88 in-lb) (Camshaft Retainer Plate Hex Bolt - NHTSA 25V-778)Torque: 115 N·m (85 lb-ft) (Primary Fixed Sheave Nut)Torque: 80 N·m (59 lb-ft) (Secondary Driven Clutch Sheave Nut)Torque: 20 N·m (15 lb-ft) (Engine Oil Drain Bolt - 12mm Hex)

Consumable Specs:ThreeBond 1342 or Loctite 243 Blue ThreadlockerYamalube 4 10W-40 4-Stroke OilCylinder Head Side Cover O-Ring

Genuine Part Numbers:95812-06012-00B74-E7641-00-00B74-E7632-00-0093210-71462-00

NHTSA Safety Recall 25V-778Yamaha XMAX 300 Blue Core

Yamaha XMAX 300 Camshaft Retainer Bolt (NHTSA 25V-778) & Blue Core Top-End Architecture

Camshaft retainer bolt safety torque 10 N·m, valve lash IN: 0.08–0.12mm / EX: 0.22–0.26mm, primary sheave 115 N·m, and secondary sheave 80 N·m.

Click on Camshaft Retainer Bolt (NHTSA 25V-778), Cold Valve Lash, Primary Sheave Nut, or Secondary Sheave to view torque values and technical remedy instructions.