Dedicated Subsystem WorkbenchPlatform Gen: 2020–2026

2023 Yamaha Tenere 700 Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2023 Yamaha Tenere 700: intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Technical PassportOEM VERIFIED

Engine

689cc

Cooling

Liquid-Cooled

Final Drive

525 Chain

Engine Oil

2.60 L (2.75 US qt)

Spark Plug

NGK LMAR8A-9

Front Tire

90/90-21

Gen 2020–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2026.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available

1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2023 Yamaha Tenere 700.

Configure Service Bundles→

Select Model Year:(Active: 2023)
7 Production Years (2020–2026)

2020 2021 2022 2023 2024 2025 2026

Suggested Items4 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances

Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.

Adjustment Mechanism: 9.48 mm

Active Valve Range (INTAKE)

0.11 - 0.20 mm

0.004 - 0.008 in

Nominal Mid-Spec Target

0.15 mm

Ideal cold lash assembly setting

Shim Diameter / Tappet

9.48 mm

Bucket-and-shim interface

Measurement Condition

Cold Engine (≤ 35°C / 95°F)

TDC compression stroke only

Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)

1. Feeler Gauge Measured Clearance (mm)

Factory intake tolerance: 0.11 - 0.20 mm

2. Currently Installed Shim (mm)

Measured with micrometer or read laser-etched face

TDC Crankshaft Timing Index

Align 'I' mark on alternator rotor with stationary pointer; cylinder #1 cam lobes facing outward

Feeler Gauge Technique

Angled blade stainless steel feeler gauge (cold engine ≤ 35°C / 95°F)

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2023 Yamaha Tenere 700 platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #YAM-23V472Campaign 990168: Ténéré 700 Front Brake Caliper Mount Bolt Thread Engagement

Source: Yamaha_Tenere700_Recall990168_BrakeCaliper.pdf

Mandated Torques:Torque: 40 N·m (4.0 kgf-m, 30 lb-ft) (Front Brake Caliper Mounting Bolts)

Consumable Specs:Yamalube DOT 4 Brake Fluid (P/N: ACC-BRAKE-FL-UD)Union Bolt Crush Washer Gaskets

Genuine Part Numbers:90105-10778-00ACC-BRAKE-FL-UDLIT-11616-35-55

Mechanical Fastener StackExploded View: Front Brake Caliper Mount & Bolt Thread Engagement (Recall 990168 / NHTSA 23V-472)

40 N·m (30 lb-ft) • M10×1.25×40mm (20mm Thread)

Click any fastener, caliper, or fluid node to inspect recall directives.

Inspection TargetCampaign 990168 / 23V-472

Revised Flange Hex Caliper Bolts (20mm Thread)

Genuine OEM Part # 90105-10778-00

Factory Fastener Specification:40 N·m (4.0 kgf-m, 30 lb-ft)

CRITICAL RECALL COMPONENT (Campaign 990168 / 23V-472). Nominal length: 40mm, Thread length: 20mm, Flange: 20mm. Replaces suspect bolts with short thread length that damaged internal caliper threads.

Interactive Assembly Nodes: