Factory Workshop SpecificationsPlatform Gen: 2015–2026

2026 Yamaha MT-07 Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Gen 2015–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2015 through 2026.

Select Model Year:(Active: 2026)

2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

689cc

Drive

525

Cooling

Liquid-Cooled

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2026 Yamaha MT-07.

10 Dedicated Engineering Spoke Pages

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 2.60 L (2.75 US qt) • Coolant: 1.60 L (1.69 US qt) • Brake: DOT 4

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: 30A Blade / Starter Solenoid • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: 11.5:1 • Std: 165-210 PSI • Limit: 142 PSI

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YTZ10S • CCA: 190 • Regulated: 14.2 - 14.8 V DC (at 5,000 RPM with High Beam)

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 120/70ZR17 • Rear: 180/55ZR17

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: 130 mm • Rear Travel: 130 mm

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: Every 4,000 miles (6,000 km) mi • Valves: N/A • Plugs: Every 8,000 miles (13,000 km) mi

Open Dedicated Workbench →

Fluids & Service Capacities

Shop Fluids →

Engine Oil (Drain & Filter Change)2.60 L (2.75 US qt)

Engine Oil (Drain Only)2.30 L (2.43 US qt)

Recommended Oil Viscosity10W-40 API SG or higher, JASO MA2

Coolant System Capacity1.60 L (1.69 US qt)

Brake Fluid StandardDOT 4

Drivetrain, Chain & Gearing

Gearing Calculator →Shop Chains & Sprockets →

Drive Chain Pitch525

Chain Link Count108 Links

Front Sprocket Teeth16T

Rear Sprocket Teeth43T

Final Drive Configuration525 Pitch Chain

Ignition & Electrical Specifications

Shop Plugs & Batteries →

OEM Spark Plug Part NumberNGK LMAR8A-9

Electrode Spark Plug Gap0.8 - 0.9 mm (0.031 - 0.035 in)

OEM Battery Reference CodeYTZ10S

Battery Output & Rating12V 8.6Ah 190 CCA

Spark Plug Inspection Interval8,000 miles (13,000 km) miles

Wheels, Tires & Inflation Pressures

Shop Tires →

Front Tire Dimensions120/70ZR17

Cold Front Inflation Pressure33 PSI (Cold)

Rear Tire Dimensions180/55ZR17

Cold Rear Inflation Pressure36 PSI (Cold)

OEM Wheel Rim Widths (F / R)3.50" / 5.50"

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2026 Yamaha MT-07 platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #YAM-18V483Campaign 990120: MT-07 Drive Chain Guard Mounting Bolt Loosening & 4mm Countermeasure Collar

Source: Yamaha_MT07_Recall990120_ChainGuard.pdf

Mandated Torques:Torque: 9 N·m (6.6 ft-lb) (Revised Chain Guard Retaining Bolts - increased from 6 N·m)

Consumable Specs:4.0mm Countermeasure Collar (Black finish replacing Silver)Loctite Medium Strength Threadlocker

Genuine Part Numbers:990120-KitPart 573 Report 18V-483

Swingarm & Drivetrain Fastener StackExploded View: Drive Chain Guard & 4mm Countermeasure Collar (Recall 990120 / NHTSA 18V-483)

9 N·m Revised Bolt Torque • 4.0mm Black Collar (Replaces Silver)

Click any component or torque callout to inspect Recall 990120 specifications.

Inspection TargetRecall 990120 / 18V-483

Revised 4.0mm Black Countermeasure Collar

Recall Remedy Part # 990120-Kit

Factory Mechanical Specification:Length: 4.0 mm • Black Anodized Finish

CRITICAL RECALL COUNTERMEASURE (18V-483): Original silver collar was too short, allowing vibration to shake the mounting bolt loose. The countermeasure collar length is increased to 4.0mm and finished in black for instant visual inspection.

Interactive Assembly Nodes:

Looking for direct-fit parts for this 2026 MT-07?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts