Dedicated Subsystem WorkbenchPlatform Gen: 2015–2026

2023 Yamaha MT-07 Fuse Box Diagram, Amperages & Relay Diagnostics

Complete fuse box location, blade fuse slot mappings, ISO color codes, blown fuse symptoms and dark current parasitic drain testing for 2023 Yamaha MT-07.

Technical PassportOEM VERIFIED

Engine

689cc

Cooling

Liquid-Cooled

Final Drive

525 Chain

Engine Oil

2.60 L (2.75 US qt)

Spark Plug

NGK LMAR8A-9

Front Tire

120/70ZR17

Gen 2015–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2015 through 2026.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available

1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2023 Yamaha MT-07.

Configure Service Bundles→

Select Model Year:(Active: 2023)
12 Production Years (2015–2026)

2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Suggested Items3 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

CIRCUIT HEALTH DECKMain: 30A Blade / Starter SolenoidSpec: < 1.5 mA Quiescent

FUSE BOX, RELAY ASSIGNMENTS & PARASITIC DRAIN ISOLATOR

Fuse & Relay Location: Under rider seat directly behind battery; Main 30A fuse mounted directly to starter relay switch on left frame rail.

Select Fuse to Inspect Circuits & Failure SymptomsFormat: Mini Blade (ATM)

10A

SLOT: IGNITION

Engine Control & Ignition Coils

Rating: 10 Amps

Downstream Protected Components:

ECU PowerIgnition Stick Coils 1 & 2Main Relay Coil Circuit

Mechanic Diagnostic: Symptoms If Blown

Starter cranks engine normally but engine never fires; no spark at plugs.

Shop Replacement Fuses

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2023 Yamaha MT-07 platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #YAM-18V483Campaign 990120: MT-07 Drive Chain Guard Mounting Bolt Loosening & 4mm Countermeasure Collar

Source: Yamaha_MT07_Recall990120_ChainGuard.pdf

Mandated Torques:Torque: 9 N·m (6.6 ft-lb) (Revised Chain Guard Retaining Bolts - increased from 6 N·m)

Consumable Specs:4.0mm Countermeasure Collar (Black finish replacing Silver)Loctite Medium Strength Threadlocker

Genuine Part Numbers:990120-KitPart 573 Report 18V-483

Swingarm & Drivetrain Fastener StackExploded View: Drive Chain Guard & 4mm Countermeasure Collar (Recall 990120 / NHTSA 18V-483)

9 N·m Revised Bolt Torque • 4.0mm Black Collar (Replaces Silver)

Click any component or torque callout to inspect Recall 990120 specifications.

Inspection TargetRecall 990120 / 18V-483

Revised 4.0mm Black Countermeasure Collar

Recall Remedy Part # 990120-Kit

Factory Mechanical Specification:Length: 4.0 mm • Black Anodized Finish

CRITICAL RECALL COUNTERMEASURE (18V-483): Original silver collar was too short, allowing vibration to shake the mounting bolt loose. The countermeasure collar length is increased to 4.0mm and finished in black for instant visual inspection.

Interactive Assembly Nodes: