Dedicated Subsystem WorkbenchPlatform Gen: 2006–2026

2019 Vespa GTS 300 / GTS 300 Super Fastener Torque Specs & Tightening Matrix

Factory torque specs for 2019 Vespa GTS 300 / GTS 300 Super: oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.

Gen 2006–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2006 through 2026.

Select Model Year:(Active: 2019)

2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

278cc

Drive

Not Available

Cooling

Liquid-Cooled with Dual Lateral Front Radiators & Electric Fan

Critical Fastener Torque Tolerances

FSM Certified Specs

Factory workshop tightening torque ratings for axles, calipers, engine plugs, and triple clamps.

Lube:

Fastener / Component	Torque (N·m)	Service Note & Thread Guidance	System
No fasteners matching '' found in this category.

Technical Standard:Always calibrate torque wrenches prior to critical chassis fastening. Values reflect clean, dry threads unless threadlocker or anti-seize is specifically noted.

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2019 Vespa GTS 300 / GTS 300 Super platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #FSB-VES-GTS-01Technical Service Bulletin FSB-VES-GTS-01: Single-Sided Trailing Link Front Spindle Bearing Overhaul, ASR Sensor Air Gap & Rear Hub Gear Oil Service

Source: Piaggio_Vespa_GTS300_Trailing_Link_ASR_Service.pdf

Mandated Torques:Torque: 90–110 N·m (66–81 lb-ft) (Front Wheel Hub Castle Nut & Cotter Pin)Torque: 40–45 N·m (30–33 lb-ft) (Front Trailing Link Shock Lower Mounting Bolt)Torque: 40–45 N·m (30–33 lb-ft) (Upper Steering Column Locking Ring Nut)Torque: 15–18 N·m (11–13 lb-ft) (Rear Hub Final Gear Oil Drain & Fill Plugs)

Consumable Specs:Eni i-Ride PG 5W-40 Full Synthetic OilEni Rotra Bike 80W-90 Hub Gear OilWaterproof Marine Calcium-Sulfonate Grease (Trailing Link Needle Rollers)

Genuine Part Numbers:B0181521A0082725638141R000564

Vespa Italian Heritage EngineeringGTS 300 / Super HPE