Free Shipping Over $15030-Day Returns
Free Shipping $150+30-Day Returns
WOWSHOPPERMOTORSPORTS
← Full Motorcycle OverviewShop Parts For This Ride →
Dedicated Subsystem WorkbenchPlatform Gen: 2023–2026

2026 Suzuki V-Strom 800DE Charging System, Stator AC Output & Battery Health

Stator 3-phase AC voltage at 5,000 RPM, coil resistance, regulated DC voltage, battery code YTX9-BS (12V 8Ah), CCA rating, and multimeter charging diagnostic steps for 2026 Suzuki V-Strom 800DE.

Technical PassportOEM VERIFIED
Engine
776cc
Cooling
Not Available
Final Drive
Chain
Engine Oil
3.40 L (3.60 US qt)
Spark Plug
NGK CPR8EA-9
Front Tire
90/90-21 M/C 54H (Tube type)
Browse Flagship Teardowns →
Gen 2023–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2023 through 2026.

Select Model Year:(Active: 2026)
4 Production Years (2023–2026)
Suggested Items3 Verified Workshop Consumables Available for this Job
View Suggested Items ↓

3-Phase Charging System & Battery Diagnostic Flowchart

Yuasa & OEM Standards
Multimeter troubleshooting protocols, cold cranking amps (CCA) ratings, 3-phase stator AC outputs, and regulator-rectifier health verification.
Shop YTX9-BS (12V 8Ah) Batteries
OEM Battery Code
YTX9-BS (12V 8Ah)
Cold Cranking Rating
Not Available
Capacity (10HR Rate)
Not Available
Regulated Output Spec
Key-OFF Parasitic Limit
V DC
Multimeter Test Diagnosis
Enter your multimeter terminal reading on the left to view instant diagnostic interpretations and recommended workshop actions.
OEM Factory AGM BatteryOEM Replacement
Dimensions: • Weight: Not Available. Pre-filled absorbed glass mat technology engineered for heavy vibration resistance.
Lithium LiFePO4 UpgradeUp to 70% Lighter
Features built-in RE-START jump starting reserve. Never stranded by dead lights: press the restart button on the top terminal to crank the motorcycle without jumper cables.
Smart Maintainer SpecBattery Life Extension
Standard Charge Rate: . Automated desulfation & float maintenance ensures full capacity retention during off-season winter storage.
Recommended Parts: •

Suzuki Diagnostic Fault Codes & Multimeter Bench Testing

FI & OBD2 Decoder
Authentic factory ECU fault codes, sensor resistance specifications, and harness pinout troubleshooting.
Launch Full Suzuki DTC Engine→
Code C12Crankshaft Position Sensor (CKPS)
No CKPS pulse detected while starter cranks.
Test: Measure 150-220 Ω across Green and Blue CKPS pins.
Code C28Secondary Throttle Valve Actuator (STVA)
STVA stepper motor drive circuit malfunction.
Test: Measure 6.0-10.0 Ω across STVA stepper coil pin pairs.
Code C46Exhaust Control Valve Actuator (EXCVA)
SET valve actuator position sensor or servo motor failure.
Test: Measure EXCVA potentiometer: 0.5k-4.5k Ω smoothly rotating.
Looking for other error codes, sensor pinouts, or OBD2/Euro 5 codes?

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
No Active Federal Safety Recalls Reported
The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2026 Suzuki V-Strom 800DE platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin
Bulletin #SUZ-24V535Safety Recall 3A03: Rear Wheel Tire Tread Cracking & Dunlop Trailmax Mixtour Replacement
Source: Suzuki_VStrom800DE_Recall24V535_3A03_RearTire.pdf
Mandated Torques:Torque: 100 N·m (74.0 lbf·ft) (Rear Wheel Axle Castle Nut - M22 x 1.5)Torque: 22 N·m (16.5 lbf·ft) (Chain Adjuster 12mm Locknuts - 90° Crowfoot)Torque: 60 N·m (44.0 lbf·ft) (Rear Driven Sprocket 6x Flange Locknuts)Torque: 35 N·m (26.0 lbf·ft) (Rear Brake Rotor Torx/Hex Mounting Bolts)Torque: 25 N·m (18.5 lbf·ft) (Rear Caliper Torque Link Pin)
Consumable Specs:Stainless Steel Axle Cotter Pin (04111-4035A)Tire Mounting Bead Lubricant (Soap-Based)Tire Balancing Adhesive Weights
Genuine Part Numbers:65110-25810-RX065110-25L30-RX065200-25810-RX065311-25810-RX004111-4035A
NHTSA Recall 24V-535Campaign 3A03

V-Strom 800DE Rear Tire & Axle Adjustment Assembly

Countermeasure 150/70R17 tube-type rear tire, axle cotter pin locking, and 12mm crowfoot torque adapter geometry.

Federal Safety RemedyAxle 100 N·m / Crowfoot 22 N·m
SWINGARM DROPOUT / AXLE SLOTREAR AXLE CASTLE NUT100 N·m (74.0 lb-ft)New Stainless Cotter PinADJUSTER LOCKNUT (12mm)22 N·m (16.5 lb-ft)Crowfoot Perpendicular (90°)COUNTERMEASURE REAR TIRE150/70R17 M/C 69H TTPart: 65110-25L30-RX0

Click any element above for factory alignment marks, crowfoot wrench angle rules, and cotter pin installation.

Factory Tightening TorquesService Manual

Rear Wheel Axle Nut (M22 × 1.5)100 N·m (74.0 lb-ft)
Castle nut with new stainless cotter pin (04111-4035A)
Chain Adjuster Locknut (12mm) - Direct22 N·m (16.5 lb-ft)
Standard socket directly on adjuster locknut
Chain Adjuster Locknut - 90° Crowfoot22 N·m (16.5 lb-ft)
Crowfoot set strictly at 90° perpendicular to torque wrench centerline
Rear Driven Sprocket Locknuts (6x)60 N·m (44.0 lb-ft)
Diagonal cross-pattern tightening; self-locking flange nuts
Rear Brake Disc Mounting Bolts35 N·m (26.0 lb-ft)
Pre-coated threadlock; replace or apply medium threadlocker
Rear Caliper Carrier Guide Pin25 N·m (18.5 lb-ft)
Inspect slide pins and rubber boots for integrity

Explore Other Subsystems for this 2026 Suzuki V-Strom 800DE

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview
Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →
Subsystem Guide/fluids

Fluids & Capacities

Oil: 3.40 L (3.60 US qt) • Coolant: 1.70 L (1.80 US qt) • Brake: DOT 4 Brake Fluid

Open Dedicated Workbench →
Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →
Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →
Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →
Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →
Subsystem Guide/tires

Tires & Gearing

Front: 90/90-21 M/C 54H (Tube type) • Rear: 150/70R17 M/C 69H (Tube type)

Open Dedicated Workbench →
Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →
Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →
← Return to Full Comprehensive Motorcycle Specification Hub (2026 Suzuki V-Strom 800DE)

Looking for direct-fit parts for this 2026 V-Strom 800DE?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts