2019 Suzuki SV650 Cylinder Compression & Leakdown Diagnostic Engine
Factory compression specs for 2019 Suzuki SV650: standard pressure 156 - 213 PSI (1076 - 1469 kPa), service limit 135 PSI, dry vs wet test diagnostics and acoustic leak stethoscope.
Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2017 through 2026.
Cylinder Compression & Leakdown Diagnostic Engine
Official Factory Service Bulletins & Field Updates
V-Strom 650 / SV650 AC Generator Stator Coil Assembly
Heat-resistant stator coil winding replacement, CKP sensor air gap, case grommet sealing, and cover bolt torques.
Click any element above for threadlocker specs, rubber grommet liquid sealant, and diagonal cover tightening.
Factory Tightening TorquesService Manual
Explore Other Subsystems for this 2019 Suzuki SV650
Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.
Fastener Torques
Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.
Fluids & Capacities
Oil: 2.60 L (2.75 US qt) • Coolant: 1.70 L (1.80 US qt) • Brake: DOT 4
Fuses & Relays
Main: 30A Blade / Starter Magnetic Relay • Location: N/A
Valve Clearances
Intake: N/A mm • Exhaust: N/A mm
Fuel Delivery & TB Sync
Idle: N/A • Rail Pressure: N/A • Vacuum: N/A
Charging & Battery
Battery: YT12A-BS • CCA: 175 • Regulated: 14.0 - 14.8 V DC
Tires & Gearing
Front: 120/70ZR17 • Rear: 160/60ZR17
Suspension & Sag
Front Travel: 125 mm • Rear Travel: 130 mm
Maintenance Schedule
Oil: Every 3,500 miles (6,000 km) mi • Valves: N/A • Plugs: Every 7,500 miles (12,000 km) mi
Looking for direct-fit parts for this 2019 SV650?
Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.