Factory Workshop SpecificationsPlatform Gen: 2011–2026

2026 Suzuki GSX-R750 Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Gen 2011–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2011 through 2026.

Select Model Year:(Active: 2026)

2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

750cc

Drive

525

Cooling

Liquid-Cooled

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2026 Suzuki GSX-R750.

10 Dedicated Engineering Spoke Pages

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 2.20 L (2.32 US qt) • Coolant: 2.60 L (2.75 US qt) • Brake: DOT 4

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: 30A Blade / Starter Magnetic Relay • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: 13.1:1 • Std: 175-225 PSI • Limit: 150 PSI

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YT12A-BS • CCA: 175 • Regulated: 14.0 - 14.8 V DC

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 120/70ZR17 • Rear: 180/55ZR17

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: 120 mm • Rear Travel: 130 mm

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: Every 3,500 miles (6,000 km) mi • Valves: N/A • Plugs: Every 7,500 miles (12,000 km) mi

Open Dedicated Workbench →

Fluids & Service Capacities

Shop Fluids →

Engine Oil (Drain & Filter Change)2.20 L (2.32 US qt)

Engine Oil (Drain Only)2.00 L (2.11 US qt)

Recommended Oil Viscosity10W-40 API SF/SG or higher, JASO MA

Coolant System Capacity2.60 L (2.75 US qt)

Brake Fluid StandardDOT 4

Drivetrain, Chain & Gearing

Gearing Calculator →Shop Chains & Sprockets →

Drive Chain Pitch525

Chain Link Count116 Links

Front Sprocket Teeth17T

Rear Sprocket Teeth45T

Final Drive Configuration525 Pitch Chain

Ignition & Electrical Specifications

Shop Plugs & Batteries →

OEM Spark Plug Part NumberNGK CR9EIA-9

Electrode Spark Plug Gap0.8 - 0.9 mm (0.031 - 0.035 in)

OEM Battery Reference CodeYT12A-BS

Battery Output & Rating12V 10Ah 175 CCA

Spark Plug Inspection Interval7,500 miles (12,000 km) miles

Wheels, Tires & Inflation Pressures

Shop Tires →

Front Tire Dimensions120/70ZR17

Cold Front Inflation Pressure36 PSI (Cold)

Rear Tire Dimensions180/55ZR17

Cold Rear Inflation Pressure42 PSI (Cold)

OEM Wheel Rim Widths (F / R)3.50" / 6.00"

Official NHTSA Safety Recalls & Technical Bulletins

2 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 2 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #14V629000POWER TRAIN:MANUAL TRANSMISSION

Received: 07/10/2014▼

Defect Description

Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2011-2014 GSX-R750 and 2009-2014 GSX-R1000 motorcycles. If a gear is missed while upshifting, the strain applied to the drive chain after the next shift may cause the rear axle to move, damaging the left-side drive chain adjuster.

Safety Hazard / Consequence

If the drive chain adjuster gets damaged, the drive chain may come off, removing power to the rear wheel, and increasing the risk of a crash.

Factory Remedy & Repair Action

Suzuki will notify owners, and dealers will replace the left-side chain adjuster with an improved part. The recall began on October 17, 2014. Owners may contact Suzuki customer service at 1-714-572-1490. Suzuki's numbers for this recall are 2A40, 2A41, 2A42 and 2A43.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

NHTSA #13V449000SERVICE BRAKES

Received: 18/10/2013▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #SUZ-13V449Safety Recall 2A31–2A36: Front Brake Master Cylinder Internal Corrosion & Top Bleeder Redesign

Source: Suzuki_GSXR_Recall13V449_2A31_MasterCylinder.pdf

Mandated Torques:Torque: 10 N·m (7.5 lbf·ft) (Master Cylinder Handlebar Clamp Bolts - Upper First Zero Gap)Torque: 23 N·m (16.5 lbf·ft) (Brake Hose Union Banjo Bolt - New Sealing Washers)Torque: 7.5 N·m (5.5 lbf·ft) (Master Cylinder Upper Bleeder Screw)Torque: 7.5 N·m (5.5 lbf·ft) (Radial Brake Caliper Bleeder Screws)Torque: 6 N·m (4.5 lbf·ft) (Brake Lever Pivot Bolt & Locknut)

Consumable Specs:Suzuki ECSTAR DOT 4 Brake FluidSilicone Brake System Assembly GreaseGenuine Copper Sealing Washers (09161-10009)

Genuine Part Numbers:59000-01810-RX059000-01820-RX059000-01830-RX059000-01840-RX059000-01850-RX059000-01860-RX0

NHTSA Recall 13V-449Campaign 2A31–2A36

GSX-R600 / GSX-R750 / GSX-R1000 Brake Master Cylinder Replacement

Countermeasure radial master cylinder with top air bleeder port, zero-gap handlebar clamp sequence, and DOT 4 purge procedure.

Mass Campaign RemedyDOT 4 Fluid / Top Bleeder Port

Click any element above to display strict factory tightening sequence & genuine washer replacement specs.

Factory Tightening Torques & Fluid StandardsService Manual

Front Master Cylinder Handlebar Clamp Bolts10 N·m (7.5 lb-ft)

Tighten upper bolt first until zero gap; then torque lower bolt

Brake Hose Union / Banjo Bolt23 N·m (16.5 lb-ft)

Install between 2 new genuine copper sealing washers (09161-10009)

Master Cylinder Upper Air Bleeder Valve7.5 N·m (5.5 lb-ft)

Top-mount bleeder screw unique to countermeasure master cylinder

Front Brake Caliper Air Bleeder Valves7.5 N·m (5.5 lb-ft)

Both radial Tokico/Brembo calipers (right side first, then left)

Brake Lever Pivot Bolt & LocknutBolt: 6 N·m (4.5 lb-ft) / Nut: 6 N·m

Apply thin coat of silicone brake grease to pivot pin contact point

Looking for direct-fit parts for this 2026 GSX-R750?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts