Dedicated Subsystem WorkbenchPlatform Gen: 2017–2026

2017 Suzuki GSX-R1000 Suspension Hydraulics, Fork Fluids & Sag Tuner

Front fork travel, rear shock travel, spring preload, damping click baselines, and dynamic rider sag calculator for 2017 Suzuki GSX-R1000.

Gen 2017–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2017 through 2026.

Select Model Year:(Active: 2017)

2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

1000cc

Drive

525

Cooling

Liquid-Cooled

Suspension Hydraulics, Fork Fluids & Interactive Sag Tuner

Showa • KYB • WP Standards

OEM hydraulic capacities, air-gap measurement standards, clicker baselines, and mathematical rider sag tuning.

Shop 43mm Fork Seals

Fork Architecture

Inverted USD Balance Free Front Fork (43mm Showa BFF)

Oil Volume Per Leg

470 ml (15.9 US fl oz) per leg

OEM Fluid Specification

Showa SS-05 (SAE 5W)

Air-Gap Spec (Oil Level)

98 mm (3.86 in) compressed, spring removed

Fork Seal Dimensions

43 x 54 x 11 mm

Total Suspension Travel

Front: 120 mm • Rear: 130 mm

Target Rider Sag: 28 - 34 mm (23 - 28% of 120 mm travel)

Front Preload Baseline

6 turns in from full soft

Rebound Damping Baseline

3.0 turns out from fully seated

Compression Damping Baseline

2.75 turns out from fully seated

Target Free Sag (Unladen)

20 - 25 mm

Enter 3-Point Sag Measurements (mm)

L1: Extended

L2: Static Bike

L3: In Full Gear

Suspension Sag Diagnosis & Geometry Status

Enter your extended, static, and rider measurements on the left (or select a preset) to compute exact sag percentages and spring preload recommendations.

Factory Fluid StandardDirect Spec

Maxima Racing Fork Fluid 5W (1 Liter)

Formulated with anti-foam agents and shear-stable viscosity index improvers to prevent damping fade under aggressive riding heat.

Fork & Dust Seal KitExact Stanchion Fit

All Balls Racing 43mm Fork & Dust Seal Kit

Features directional triple-lip rubber seal profile and external garter springs engineered to withstand heavy stanchion flex without weeping.

Air-Gap Tuning PhysicsBottoming Control

98 mm (3.86 in) compressed, spring removed

Trapped air column acts as a progressive spring in final 30% of stroke. Adding +5mm oil increases bottoming resistance without stiffening small bump compliance.

Recommended Maintenance Parts: Maxima Racing Fork Fluid 5W (1 Liter) • All Balls Racing 43mm Fork & Dust Seal Kit

Shop Fork Fluids Find Direct-Fit Fork Seals

Official NHTSA Safety Recalls & Technical Bulletins

2 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 2 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #18V694000FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

Received: 04/10/2018▼

Defect Description

Suzuki Motor of America, Inc. (Suzuki) is recalling certain 2017-2018 Suzuki DL650A, DL650XA, GSX-R1000, GSX-R1000R, and 2018 GSX-S750 motorcycles. During installation, the fuel pump O-ring may have been twisted, reducing the sealing performance and possibly resulting in a fuel leak.

Safety Hazard / Consequence

A fuel leak in the presence of an ignition source can increase the risk of a fire.

Factory Remedy & Repair Action

Suzuki will notify owners, and dealers will replace the fuel pump O-ring and the fuel tank inner vessel, free of charge. The recall began October 31, 2018. Owners may contact Suzuki customer service at 1-800-934-0934. Suzuki's numbers for this recall are 2A86-2A88.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

NHTSA #18V064000ENGINE AND ENGINE COOLING:ENGINE

Received: 22/01/2018▼