2017 KTM 690 Enduro R / SMC R Fastener Torque Specs & Tightening Matrix
Factory torque specs for 2017 KTM 690 Enduro R / SMC R: oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.
Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2014 through 2024.
Suggested Items & Workshop Consumables for this Fastener & Chassis Torque Job
Task-critical chemicals, precision tools, and replacement consumables dynamically matched to the 2017 KTM 690 Enduro R / SMC R factory engineering specifications.
Critical Fastener Torque Tolerances
FSM Certified Specs| Fastener / Component | Torque (N·m) | Service Note & Thread Guidance | System |
|---|---|---|---|
Clutch Slave Cylinder Screws (3x M6x25) M6 x 25• Torx T30 / 8 mm• Loctite 243 | 10 N·m (7.4 ft-lb) | Recall KTB2112: Replace slave cylinder assembly (76132061044). WARNING: Damaged bellows seal allows hydraulic fluid into crankcase oil. Suggested Item:PERMATEX Gel Threadlocker - Blue ($14.99) → | Engine / Drive |
Clutch Line Banjo Union Bolt (M6) M6 x 1.0• 8 mm Socket• None (New Copper Crush Rings) | 6 N·m (4.4 ft-lb) | MAXIMUM 6 N·m STRICT LIMIT. M6 banjo shears if torqued like M10. WARNING: Banjo bolt fractures easily if torqued beyond 7 N·m. | Engine / Drive |
Front Countershaft Sprocket Nut M20 x 1.5• 32 mm Socket• Loctite 243 | 100 N·m (73.8 ft-lb) | Degrease countershaft splines. Torque to 100 N·m and fold tab. WARNING: Loose sprocket damages countershaft splines beyond repair. Suggested Item:PERMATEX Gel Threadlocker - Blue ($14.99) → | Engine / Drive |
Front Axle Screw M25 x 1.5• 17 mm Allen• Light grease | 40 N·m (29.5 ft-lb) | Torque axle to 40 N·m, bounce forks 3x, torque pinch bolts. WARNING: Prevents fork leg binding on high-travel WP XPLOR forks. | wheels |
Fork Leg Axle Pinch Screws (4x) M8 x 30• 10 mm Socket• None | 15 N·m (11.1 ft-lb) | Torque alternating 3x per fork bottom to 15 N·m. WARNING: Over-tightening fractures WP cast fork bottoms. | suspension |
Rear Axle Collar Nut M25 x 1.5• 32 mm Socket• None | 90 N·m (66.4 ft-lb) | Ensure chain tensioner index marks align equally on both sides. WARNING: Improper rear axle torque allows axle skew under acceleration. | wheels |
Oil Drain Plug with Magnet M12 x 1.5• 13 mm Socket• None (New Copper Ring) | 20 N·m (14.8 ft-lb) | Clean metallic shavings. Torque to 20 N·m. WARNING: LC4 sump thread repairs require engine case removal. | Engine / Drive |
Official Factory Service Bulletins & Field Updates
Husqvarna 701 & KTM 690 Hydraulic Clutch Slave Cylinder Assembly
27mm hydraulic clutch slave cylinder bellows gasket countermeasure, M6 union torques, and M20 countershaft sprocket specifications.
Click any component or torque callout above to inspect repair instructions, gasket specifications, and torque mandates.
Explore Other Subsystems for this 2017 KTM 690 Enduro R / SMC R
Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.
Fluids & Capacities
Oil: 1.70 L (1.80 US qt) • Coolant: 1.20 L (1.27 US qt) • Brake: Motorex Brake Fluid DOT 5.1
Fuses & Relays
Main: N/A • Location: N/A
Compression & Leakdown
Ratio: N/A
Valve Clearances
Intake: N/A mm • Exhaust: N/A mm
Fuel Delivery & TB Sync
Idle: N/A • Rail Pressure: N/A • Vacuum: N/A
Charging & Battery
Battery: YTZ10S (12V 8.6Ah AGM)
Tires & Gearing
Front: 90/90-21 M/C 54R TT • Rear: 140/80-18 M/C 70R TT
Suspension & Sag
Front Travel: N/A • Rear Travel: N/A
Maintenance Schedule
Oil: N/A • Valves: N/A • Plugs: N/A
Looking for direct-fit parts for this 2017 690 Enduro R / SMC R?
Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.