2021 KTM 390 Adventure Oil Capacities, Coolant & Fluid Specifications
Verified fluid capacities for 2021 KTM 390 Adventure: engine oil 1.60 L (1.70 US qt), viscosity Motorex Formula 4T SAE 15W-50 (JASO MA2), coolant 1.00 L (1.06 US qt), brake fluid, and fork oil levels.
Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2024.
Official Factory Service Bulletins & Field Updates
KTM 390 & Husqvarna 401 Weather-Sealed E-Throttle Twist Grip Assembly
Ride-by-wire electronic twist grip IP67 sealing countermeasure, locator pin engagement, and XC-2 adaptation reset.
Click any component or torque callout above to inspect e-throttle waterproofing details, bar end clearance, and XC-2 adaptation reset.
Workshop Maintenance Kit & Factory Fluids
Authentic factory-grade motor oil, oil filter, and high-temp brake fluid matched precisely to 2021 KTM 390 Adventure capacities.


EBC High-Performance DOT 4 Synthetic Brake Fluid
Bosch VR 5 NEU / NGK LKAR8AI-9
Explore Other Subsystems for this 2021 KTM 390 Adventure
Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.
Fastener Torques
Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.
Fuses & Relays
Main: N/A • Location: N/A
Compression & Leakdown
Ratio: N/A
Valve Clearances
Intake: N/A mm • Exhaust: N/A mm
Fuel Delivery & TB Sync
Idle: N/A • Rail Pressure: N/A • Vacuum: N/A
Charging & Battery
Battery: ETZ-9 (12V 8Ah AGM)
Tires & Gearing
Front: 100/90-19 M/C 57H TL • Rear: 130/80-17 M/C 65H TL
Suspension & Sag
Front Travel: N/A • Rear Travel: N/A
Maintenance Schedule
Oil: N/A • Valves: N/A • Plugs: N/A
Looking for direct-fit parts for this 2021 390 Adventure?
Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.