Free Shipping Over $15030-Day Returns
Free Shipping $150+30-Day Returns
WOWSHOPPERMOTORSPORTS
← Full Motorcycle OverviewShop Parts For This Ride →
Dedicated Subsystem WorkbenchPlatform Gen: 2020–2024

2020 KTM 390 Adventure Charging System, Stator AC Output & Battery Health

Stator 3-phase AC voltage at 5,000 RPM, coil resistance, regulated DC voltage, battery code ETZ-9 (12V 8Ah AGM), CCA rating, and multimeter charging diagnostic steps for 2020 KTM 390 Adventure.

Technical PassportOEM VERIFIED
Engine
373cc
Cooling
Not Available
Final Drive
520 Chain
Engine Oil
1.60 L (1.70 US qt)
Spark Plug
Bosch VR 5 NEU / NGK LKAR8AI-9
Front Tire
100/90-19 M/C 57H TL
Browse Flagship Teardowns →
Gen 2020–2024

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2024.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available
1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2020 KTM 390 Adventure.
Configure Service Bundles→
Select Model Year:(Active: 2020)
5 Production Years (2020–2024)
Suggested Items3 Verified Workshop Consumables Available for this Job
View Suggested Items ↓

3-Phase Charging System & Battery Diagnostic Flowchart

Yuasa & OEM Standards
Multimeter troubleshooting protocols, cold cranking amps (CCA) ratings, 3-phase stator AC outputs, and regulator-rectifier health verification.
Shop ETZ-9 (12V 8Ah AGM) Batteries
OEM Battery Code
ETZ-9 (12V 8Ah AGM)
Cold Cranking Rating
Not Available
Capacity (10HR Rate)
Not Available
Regulated Output Spec
Key-OFF Parasitic Limit
V DC
Multimeter Test Diagnosis
Enter your multimeter terminal reading on the left to view instant diagnostic interpretations and recommended workshop actions.
OEM Factory AGM BatteryOEM Replacement
Dimensions: • Weight: Not Available. Pre-filled absorbed glass mat technology engineered for heavy vibration resistance.
Lithium LiFePO4 UpgradeUp to 70% Lighter
Features built-in RE-START jump starting reserve. Never stranded by dead lights: press the restart button on the top terminal to crank the motorcycle without jumper cables.
Smart Maintainer SpecBattery Life Extension
Standard Charge Rate: . Automated desulfation & float maintenance ensures full capacity retention during off-season winter storage.
Recommended Parts: •

KTM Diagnostic Fault Codes & Multimeter Bench Testing

FI & OBD2 Decoder
Authentic factory ECU fault codes, sensor resistance specifications, and harness pinout troubleshooting.
Launch Full KTM DTC Engine→
Code P0105Manifold Absolute Pressure (MAP)
MAP sensor electrical circuit malfunction / range error.
Test: Verify 5.0V VRef and 2.5-3.0V signal key-on engine-off.
Code P0115Engine Coolant Temp (ECT)
ECT sensor circuit open, short, or out of plausible range.
Test: Measure NTC thermistor: ~2.5 kΩ at 20°C, 300 Ω at 80°C.
Code P0335Crankshaft Position Sensor (CKP)
CKP sensor electrical circuit or missing pulse teeth.
Test: Measure VR magnetic pickup coil resistance (typically 200-600 Ω).
Looking for other error codes, sensor pinouts, or OBD2/Euro 5 codes?

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
No Active Federal Safety Recalls Reported
The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2020 KTM 390 Adventure platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin
Bulletin #KTM-25V598Safety Recall KTB2606 / HTB2603: Sealed E-Throttle Twist Grip Assembly & Adaptation Reset
Source: KTM_Recall25V598_RCRIT-25V598-9541.pdf
Mandated Torques:E-Throttle Housing Clamp Screws (2x M4): 3.5 N·m (31 in-lb)Handlebar End Weight Screw (M6): 20 N·m (15 lb-ft)Handlebar Switchgear Screws (M4): 2.0 N·m (18 in-lb)Front Brake Master Cylinder Clamp (M6): 5 N·m (44 in-lb)
Consumable Specs:N/A
Genuine Part Numbers:Exchange Throttle Cmpl. (390 Adv / Duke / 401) (95802010044)Exchange Switch Control RH (RC 390) (94811074000)EJOT PT Screw K40×12 (0081040121)Handlebar Grip Right (90102021000)
NHTSA Recall 25V-598 & 26V-196Bulletins KTB2606 & HTB2603

KTM 390 & Husqvarna 401 Weather-Sealed E-Throttle Twist Grip Assembly

Ride-by-wire electronic twist grip IP67 sealing countermeasure, locator pin engagement, and XC-2 adaptation reset.

Safety Recall RemedyHousing 3.5 N·m / Bar End 20 N·m
Genuine Part Numbers:9580201004494811074000008104012190102021000
22.2mm HANDLEBAR TUBELOCATOR HOLEIP67 SENSORHall Dual-ChannelTWIST GRIP TUBEBAR END1.5–2.0 mm GAP6-PIN PLUGHOUSING CLAMP SCREWS (2x)3.5 N·m (31 in-lb)Torx T20 into Locator PinBAR END WEIGHT SCREW20 N·m (15 lb-ft)Maintain 1.5–2.0mm GapCOUNTERMEASURE E-THROTTLEWaterproof IP67 Internal SealingPart: 95802010044

Click any component or torque callout above to inspect e-throttle waterproofing details, bar end clearance, and XC-2 adaptation reset.

Explore Other Subsystems for this 2020 KTM 390 Adventure

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview
Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →
Subsystem Guide/fluids

Fluids & Capacities

Oil: 1.60 L (1.70 US qt) • Coolant: 1.00 L (1.06 US qt) • Brake: DOT 4 / DOT 5.1

Open Dedicated Workbench →
Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →
Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →
Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →
Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →
Subsystem Guide/tires

Tires & Gearing

Front: 100/90-19 M/C 57H TL • Rear: 130/80-17 M/C 65H TL

Open Dedicated Workbench →
Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →
Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →
← Return to Full Comprehensive Motorcycle Specification Hub (2020 KTM 390 Adventure)

Looking for direct-fit parts for this 2020 390 Adventure?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts