2023 KTM 300 XC Suspension Hydraulics, Fork Fluids & Sag Tuner

OEM hydraulic capacities, air-gap measurement standards, clicker baselines, and mathematical rider sag tuning.

Front Preload Baseline

9.6 bar (139 PSI) AER / 4.2 N/mm coil spring

Rebound Damping Baseline

Fork: 18 clicks out | Shock: 15 clicks out

Compression Damping Baseline

Fork: 18 clicks out | Shock Low-Speed: 15 clicks out / High-Speed: 2.0 turns out

Target Free Sag (Unladen)

25 - 35 mm

Enter 3-Point Sag Measurements (mm)

Suspension Sag Diagnosis & Geometry Status

Enter your extended, static, and rider measurements on the left (or select a preset) to compute exact sag percentages and spring preload recommendations.

Motorex Racing Fork Oil 4W (1 Liter)

Formulated with anti-foam agents and shear-stable viscosity index improvers to prevent damping fade under aggressive riding heat.

SKF 48mm WP Dual-Compound Fork & Dust Seal Kit

Features directional triple-lip rubber seal profile and external garter springs engineered to withstand heavy stanchion flex without weeping.

WP XACT Air Pressure (2020–2023 AER): 9.6 bar (139 PSI) cold | 2024+ Closed-Cartridge Spring: 4.2 N/mm

Trapped air column acts as a progressive spring in final 30% of stroke. Adding +5mm oil increases bottoming resistance without stiffening small bump compliance.

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2023 KTM 300 XC platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.