Free Shipping Over $15030-Day Returns
Free Shipping $150+30-Day Returns
WOWSHOPPERMOTORSPORTS
← Full Motorcycle OverviewShop Parts For This Ride →
Dedicated Subsystem WorkbenchPlatform Gen: 2015–2024

2019 KTM 1290 Super Adventure / R / S Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2019 KTM 1290 Super Adventure / R / S: intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Technical PassportOEM VERIFIED
Engine
1301cc
Cooling
Liquid-Cooled
Final Drive
525 Chain
Engine Oil
3.60 L (3.80 US qt)
Spark Plug
NGK LKAR9BI-10 (Outer) / LMAR7DI-10 (Inner)
Front Tire
120/70ZR19
Browse Flagship Teardowns →
Gen 2015–2024

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2015 through 2024.

Select Model Year:(Active: 2019)
10 Production Years (2015–2024)
Suggested Items4 Verified Workshop Consumables Available for this Job
View Suggested Items ↓

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances
Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.
Adjustment Mechanism: 9.48 mm
Active Valve Range (INTAKE)
0.12 - 0.20 mm
0.005 - 0.008 in
Nominal Mid-Spec Target
0.16 mm
Ideal cold lash assembly setting
Shim Diameter / Tappet
9.48 mm
Bucket-and-shim interface
Measurement Condition
Cold Engine (≤ 35°C / 95°F)
TDC compression stroke only
Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)
mm
Factory intake tolerance: 0.12 - 0.20 mm
mm
Measured with micrometer or read laser-etched face
TDC Crankshaft Timing Index
Align crankshaft TDC mark with engine timing index pointer
Feeler Gauge Technique
Angled blade feeler gauge (cold engine ≤ 35°C / 95°F)

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
No Active Federal Safety Recalls Reported
The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2019 KTM 1290 Super Adventure / R / S platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin
Bulletin #KTM-18V033Safety Recall 18V-033: Brembo 16mm PR16 Radial Master Cylinder Aluminum Piston Retrofit
Source: KTM_Recall18V033_RCRIT-18V033-5873.pdf
Mandated Torques:Brembo Radial Master Cylinder Clamp Bolts (2x M6): 10 N·m (7.4 lb-ft)Brake Line Banjo Union Bolt (M10×1.0): 25 N·m (18.5 lb-ft)Bleeder Valve Screw (M10×1.0): 10 N·m (7.4 lb-ft)Brake Lever Pivot Screw (M6): 5 N·m (44 in-lb)Brake Lever Pivot Locknut (M6): 10 N·m (88 in-lb)
Consumable Specs:Motorex Brake Fluid DOT 5.1 / DOT 4
Genuine Part Numbers:Brembo 16mm PR16 Hard-Anodized Aluminum Piston Kit (1058444)KTM Hand Brake Cylinder Repair Set (61313008000)KTM Workshop Syringe Tool (50329050000)Copper Seal Ring DIN 7603-10×14×1 (0603100141)
NHTSA Recall 18V-033Brembo Campaign / SIB PR16-Piston

KTM 1290 Super Duke R / GT Brembo Radial Master Cylinder Aluminum Piston

Brembo PR16 radial front master cylinder hard-anodized aluminum piston retrofit, circlip seating, and banjo union torques.

Safety Recall RemedyClamp 10 N·m / Banjo 25 N·m / Bleeder 10 N·m
Genuine Part Numbers:105844461313008000503290500000603100141
22mm BARBREMBO PR16 RADIAL MC16mm Bore / Radial AxisALU PISTONBILLET ALUMINUM PISTONReplaces Cracked Polymer PistonKit Part: 1058444 / 61313008000BANJO BOLT & BLEEDERBanjo: 25 N·m / Bleeder: 10 N·mM10×1.0 with 2x Copper RingsHANDLEBAR CLAMP (2x M6)10 N·m (7.4 lb-ft)Upper Screw Zero-Gap First

Click any component or torque callout above to inspect aluminum piston retrofit instructions and Brembo torque mandates.

Explore Other Subsystems for this 2019 KTM 1290 Super Adventure / R / S

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview
Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →
Subsystem Guide/fluids

Fluids & Capacities

Oil: 3.60 L (3.80 US qt) • Coolant: 2.40 L (2.54 US qt) • Brake: DOT 5.1 / DOT 4

Open Dedicated Workbench →
Subsystem Guide/fuses-relays

Fuses & Relays

Main: 30A Blade / Starter Relay • Location: N/A

Open Dedicated Workbench →
Subsystem Guide/compression

Compression & Leakdown

Ratio: 13.1:1 • Std: 175-220 PSI • Limit: 150 PSI

Open Dedicated Workbench →
Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →
Subsystem Guide/electrical

Charging & Battery

Battery: YTX14-BS • CCA: 200 • Regulated: 14.2 - 14.8 V DC (at 5,000 RPM with High Beam)

Open Dedicated Workbench →
Subsystem Guide/tires

Tires & Gearing

Front: 120/70ZR19 • Rear: 170/60ZR17

Open Dedicated Workbench →
Subsystem Guide/suspension

Suspension & Sag

Front Travel: 200 mm • Rear Travel: 200 mm

Open Dedicated Workbench →
Subsystem Guide/maintenance

Maintenance Schedule

Oil: Every 9,300 miles (15,000 km) mi • Valves: N/A • Plugs: Every 18,600 miles (30,000 km) mi

Open Dedicated Workbench →
← Return to Full Comprehensive Motorcycle Specification Hub (2019 KTM 1290 Super Adventure / R / S)

Looking for direct-fit parts for this 2019 1290 Super Adventure / R / S?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts