Dedicated Subsystem WorkbenchPlatform Gen: 2019–2025

2024 Kawasaki Ninja ZX-6R (636) Fastener Torque Specs & Tightening Matrix

Factory torque specs for 2024 Kawasaki Ninja ZX-6R (636): oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.

Gen 2019–2025

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2019 through 2025.

Select Model Year:(Active: 2024)

2019 2020 2021 2022 2023 2024 2025

Engine

636cc

Drive

520

Cooling

Liquid-Cooled with High-Capacity Curved Radiator

Critical Fastener Torque Tolerances

FSM Certified Specs

Factory workshop tightening torque ratings for axles, calipers, engine plugs, and triple clamps.

Lube:

Fastener / Component	Torque (N·m)	Service Note & Thread Guidance	System
Engine Oil Drain Bolt	29 N·m (21 ft-lb)	Torque to factory specification.	Engine / Drive
Oil Filter	17 N·m (13 ft-lb)	Torque to factory specification.	Engine / Drive
Spark Plugs	13 N·m (9.6 ft-lb)	Torque to factory specification.	Engine / Drive
Front Axle Bolt	108 N·m (80 ft-lb)	Torque to factory specification.	Chassis / Susp
Front Axle Pinch Bolts	20 N·m (15 ft-lb)	Torque to factory specification.	Chassis / Susp
Rear Axle Nut	127 N·m (94 ft-lb)	Torque to factory specification.	Chassis / Susp
Front Caliper Bolts	34 N·m (25 ft-lb)	Torque to factory specification.	Braking

Technical Standard:Always calibrate torque wrenches prior to critical chassis fastening. Values reflect clean, dry threads unless threadlocker or anti-seize is specifically noted.

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #25V798000DO NOT OPERATE / PARK OUTSIDEENGINE AND ENGINE COOLING:ENGINE:HARD PARTS INTERNAL/MECHANICAL

Received: 18/11/2025▼

Defect Description

Kawasaki Motors Corp., U.S.A. (Kawasaki) is recalling certain 2024-2026 Ninja ZX-6R, ZX-6R KRT Edition, ZX-6R KRT 40th Anniversary Edition ABS, ZX-6R ABS, and ZX-6R KRT Edition ABS motorcycles. The motorcycles may lose engine power during operation due to seizure of a metal crankshaft bushing.

Safety Hazard / Consequence

An engine stall increases the risk of a crash.

Factory Remedy & Repair Action

Owners are advised not to ride their motorcycles until the repair has been completed. Dealers will re-tighten the metal crankshaft bushing, free of charge. Owner notification letters were mailed December 15, 2025. Motorcycles in this recall that were previously repaired under recall 25V376 will need to have the new remedy performed, once available. Owners may contact Kawasaki customer service at (855) 878-4217.