Dedicated Subsystem WorkbenchPlatform Gen: 2020–2026
sms%3A6572176457 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse Tire Sizes, Cold Pressures & Gearing Ratios
OEM tire sizes, front cold PSI (), rear cold PSI (), sprocket teeth count, final drive ratio, and chain pitch for sms%3A6572176457 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse.
Gen 2020–2026
Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2026.
Select Model Year:(Active: sms%3A6572176457)
7 Production Years (2020–2026)
Suggested Items3 Verified Workshop Consumables Available for this Job
View Suggested Items ↓Tire Engineering & Multi-Scenario Pressure Matrix
ETRTO ValidatedInflation targets calibrated across operating modes, verified rim width ranges, and certified alternate sizes.
Multi-Scenario Inflation Pressures
Solo Street / CommutingCold Baseline
Front: Not Available
Rear: Not Available
Two-Up Passenger & LuggageMax Load
Front: Not Available
Rear: Not Available
Off-Highway / Terrain Pressure
Maintain OEM cold baseline for street transfers; adjust -2 to -4 PSI for loose terrain.
Rim Geometry & ETRTO Envelopes
Front Wheel
OEM Rim Width:Not Available
Permissible Envelope:Not Available
Rear Wheel
OEM Rim Width:Not Available
Permissible Envelope:Not Available
Operating outside ETRTO envelope width alters crown radius, accelerates shoulder wear, and impacts lean stability.
Factory Dimensions & Verified Alternates
Verified Alternate Fitments
Factory standard sizing recommended.Alternate profiles verified for swingarm, chain guard, and fender clearances.
Final Drive Gearing & Speed/RPM Calculator
Belt DriveFactory reduction ratios, interactive sprocket gearing simulator, 6th gear cruising RPM matrix, and swingarm chain adjustment tolerances.
Drive Architecture
Poly-Chain Carbon Belt
OEM Pulleys
29T Transmission / 68T Wheel
OEM Final Ratio
2.345 : 1
Belt Teeth & Width
141-Tooth Carbon-Fiber Reinforced (30mm width)T •
Cold Tension Deflection
Quick Gearing Presets
Front Transmission PulleyStock: 29T
29 Teeth
Factory teeth count
Rear Wheel Belt PulleyStock: 68T
68 Teeth
Factory teeth count
Drive Ratio & Torque Impact
Calculated Final RatioStock: 2.345
2.345 : 1
Drivetrain Torque Delta
OEM Factory Baseline Dynamics
Balanced all-around factory engineering calibrated for EPA emissions and street usability.
Countershaft Speedo Variance:0.0%
Speedometer reads true to factory calibration standards.
Cruising Engine RPM in 6th Gear
60 MPH
Stock: 2,994 RPM
2,994 RPM
70 MPH
Stock: 3,493 RPM
3,493 RPM
80 MPH
Stock: 3,993 RPM
3,993 RPM
Calculated using factory 6th gear ratio (0.923), primary reduction (1.681), and 180/60R16 80H rolling circumference.
Belt Tension & Deflection Spec
Cold Deflection Tolerance
Check tension using a 10-lb belt tension gauge at the lower belt run midpoint window on the side stand.
Belt Architecture
141-Tooth Carbon-Fiber Reinforced (30mm width)T •
Recommended Belt:
Factory Chassis Geometry
Chassis Alignment, Drive Tension & Rear Axle Calibration
Precision workshop alignment tools, dynamic drive tension tolerances, and axle spindle calibration for the sms%3A6572176457 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse.
Belt Drive Architecture
Secondary Belt Deflection & 10-lb Tension Calibration
FACTORY BELT DEFLECTION SPEC:
Measure cold deflection with a spring-loaded belt tension tool applying exactly 10 lbs (4.5 kg) of upward force at the lower belt run inspection window on jiffy stand.
CARBON BELT TOOTH & FLANGE INSPECTION:
141-Tooth Carbon-Fiber Reinforced (30mm width)T •
Inspect polyurethane cog teeth for stone gouges or embedded gravel. Verify rear pulley chrome flanges show even belt tracking without edge fraying.
OEM Workshop Archives
3 Documented BulletinsOfficial Factory Service Bulletins & Field Updates
Bulletin #I-24-07Safety Recall Bulletin I-24-07 / NHTSA 24V-550: Challenger, Pursuit, Chieftain & Springfield Heavy-Duty Rear Suspension Pushrod Replacement
Source: RCAK-24V550-7267.pdfMandated Torques:Torque: 80 N·m (59 lb-ft) (Upper & Lower Suspension Pushrod Link Bolts)Torque: 88 N·m (65 lb-ft) (Rear Axle Nut)Torque: 12 N·m (106 in-lb) (Belt Adjuster Jam Nuts)
Consumable Specs:Loctite 243 Medium Strength ThreadlockerMoly Paste 65
Genuine Part Numbers:514489275199827556153
Safety Recall 24V-550 / Bulletin I-24-07PowerPlus 108ci Platform
Indian Challenger & Pursuit Inverted 43mm Fork & Pushrod Architecture
Inverted fork pinch bolts (24 N·m), front axle (75 N·m), Brembo radial calipers (50 N·m), and heavy-duty pushrod link (80 N·m).
Click on Triple Clamps, Front Axle, Rear Pushrod Linkage, or Brembo Caliper to view engineering torque specs.
Bulletin #I-25-01Safety Recall Bulletin I-25-01 / NHTSA 25V-108: Indian Challenger & Pursuit Lower Triple Clamp Pinch Bolt Torque & Fork Stanchion Engagement
Source: RCAK-25V108-4102.pdfMandated Torques:Torque: 24 N·m (17.7 lb-ft) (Lower & Upper Triple Clamp Fork Pinch Bolts)Torque: 75 N·m (55.3 lb-ft) (Front Wheel Axle Nut)Torque: 19 N·m (14.0 lb-ft) (Front Axle Pinch Bolts)Torque: 50 N·m (36.9 lb-ft) (Brembo Radial Caliper Mount Bolts)
Consumable Specs:Anti-Seize Lubricant on Axle ThreadsBrake Pad Contact Paste
Genuine Part Numbers:751994375562145143301
Safety Recall 24V-550 / Bulletin I-24-07PowerPlus 108ci Platform
Indian Challenger & Pursuit Inverted 43mm Fork & Pushrod Architecture
Inverted fork pinch bolts (24 N·m), front axle (75 N·m), Brembo radial calipers (50 N·m), and heavy-duty pushrod link (80 N·m).
Click on Triple Clamps, Front Axle, Rear Pushrod Linkage, or Brembo Caliper to view engineering torque specs.
Bulletin #I-24-03Safety Recall Bulletin I-24-03 / NHTSA 24V-069: Indian FTR 1200 & Challenger Contactless Gear Position Sensor (GPS) Calibration
Source: RCAK-24V069-5821.pdfMandated Torques:Torque: 9 N·m (80 in-lb) (Gear Position Sensor Mounting Screws)Torque: 10 N·m (88 in-lb) (Clutch Cable Bracket Bolts)Torque: 20 N·m (14.8 lb-ft) (Shift Linkage Jam Nuts)
Consumable Specs:Dielectric Silicone Grease on Sensor Harness ConnectorLoctite 242 Blue
Genuine Part Numbers:241477540178335415920
Safety Recalls 22V-636 & 24V-069Indian FTR 1200 / S / Rally
Indian FTR 1200 Coolant Junction & Gear Position Sensor Architecture
Coolant junction countermeasure (10 N·m), gear position sensor (9 N·m), Brembo radial bolts (50 N·m), and Bosch ABS 9.1M calibration.
Click on Coolant Junction, Gear Position Sensor, Brembo Calipers, or Bosch ABS ECU to view factory service specifications.
Explore Other Subsystems for this sms%3A6572176457 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse
Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.
Subsystem Guide/torques
Fastener Torques
Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.
Open Dedicated Workbench →
Subsystem Guide/fluids
Fluids & Capacities
Oil: 4.73 L (5.00 US qt) • Coolant: 3.50 L (3.70 US qt) • Brake: N/A
Open Dedicated Workbench →
Subsystem Guide/fuses-relays
Fuses & Relays
Main: N/A • Location: N/A
Open Dedicated Workbench →
Subsystem Guide/compression
Compression & Leakdown
Ratio: N/A
Open Dedicated Workbench →
Subsystem Guide/valves
Valve Clearances
Intake: N/A mm • Exhaust: N/A mm
Open Dedicated Workbench →
Subsystem Guide/fuel-delivery
Fuel Delivery & TB Sync
Idle: N/A • Rail Pressure: N/A • Vacuum: N/A
Open Dedicated Workbench →
Subsystem Guide/electrical
Charging & Battery
Battery: YTX20HL-BS
Open Dedicated Workbench →
Subsystem Guide/suspension
Suspension & Sag
Front Travel: N/A • Rear Travel: N/A
Open Dedicated Workbench →
Subsystem Guide/maintenance
Maintenance Schedule
Oil: N/A • Valves: N/A • Plugs: N/A
Open Dedicated Workbench →
Looking for direct-fit parts for this sms%3A6572176457 Challenger / Pursuit / Limited / Dark Horse?
Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.