Dedicated Subsystem WorkbenchPlatform Gen: 2020–2026

2023 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse Oil Capacities, Coolant & Fluid Specifications

Verified fluid capacities for 2023 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse: engine oil 4.73 L (5.00 US qt), viscosity Polaris PS-4 Extreme 15W-60 Full Synthetic, coolant 3.50 L (3.70 US qt), brake fluid, and fork oil levels.

Gen 2020–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2026.

Select Model Year:(Active: 2023)

2020 2021 2022 2023 2024 2025 2026

Engine

1768cc

Drive

Not Available

Cooling

Liquid-Cooled

Fluids & Service Capacities

Shop Fluids →

Engine Oil (Drain & Filter Change)4.73 L (5.00 US qt)

Engine Oil (Drain Only)N/A

Recommended Oil ViscosityPolaris PS-4 Extreme 15W-60 Full Synthetic

Coolant System Capacity3.50 L (3.70 US qt)

Brake Fluid StandardNot Available

Drivetrain, Chain & Gearing

Gearing Calculator →Shop Chains & Sprockets →

Drive Chain PitchBelt Drive

Chain Link Count141-Tooth Carbon-Fiber Reinforced (30mm width)T Belt

Front Sprocket TeethN/A

Rear Sprocket TeethN/A

Final Drive ConfigurationCarbon Belt Drive

Ignition & Electrical Specifications

Shop Plugs & Batteries →

OEM Spark Plug Part NumberNGK MR7F

Electrode Spark Plug Gap0.7–0.8 mm (0.028–0.031 in)

OEM Battery Reference CodeYTX20HL-BS

Battery Output & RatingNot Available

Spark Plug Inspection IntervalN/A

Wheels, Tires & Inflation Pressures

Shop Tires →

Front Tire Dimensions130/60B19 61H

Cold Front Inflation PressureN/A

Rear Tire Dimensions180/60R16 80H

Cold Rear Inflation PressureN/A

OEM Wheel Rim Widths (F / R)3.50" / 5.50"

Official NHTSA Safety Recalls & Technical Bulletins

3 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 3 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #24V550000SUSPENSION:REAR

▼

Defect Description

Polaris Bulletin I-24-07: Rear suspension pushrod may buckle under load on 2024 Challenger and Pursuit models.

Safety Hazard / Consequence

A buckled pushrod can sever the chassis wiring harness, puncture the coolant reservoir, damage the rear tire, or collapse rear suspension.

Factory Remedy & Repair Action

Dealers replace rear suspension pushrod with upgraded forged steel component torqued to 80 N·m.

NHTSA #25V108000FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

▼

NHTSA #24V069000EXTERIOR LIGHTING:BRAKE LIGHTS

▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

3 Documented Bulletins

Bulletin #I-24-07Safety Recall Bulletin I-24-07 / NHTSA 24V-550: Challenger, Pursuit, Chieftain & Springfield Heavy-Duty Rear Suspension Pushrod Replacement

Source: RCAK-24V550-7267.pdf

Mandated Torques:Torque: 80 N·m (59 lb-ft) (Upper & Lower Suspension Pushrod Link Bolts)Torque: 88 N·m (65 lb-ft) (Rear Axle Nut)Torque: 12 N·m (106 in-lb) (Belt Adjuster Jam Nuts)

Consumable Specs:Loctite 243 Medium Strength ThreadlockerMoly Paste 65

Genuine Part Numbers:514489275199827556153

Safety Recall 24V-550 / Bulletin I-24-07PowerPlus 108ci Platform

Indian Challenger & Pursuit Inverted 43mm Fork & Pushrod Architecture

Inverted fork pinch bolts (24 N·m), front axle (75 N·m), Brembo radial calipers (50 N·m), and heavy-duty pushrod link (80 N·m).

Click on Triple Clamps, Front Axle, Rear Pushrod Linkage, or Brembo Caliper to view engineering torque specs.

Bulletin #I-25-01Safety Recall Bulletin I-25-01 / NHTSA 25V-108: Indian Challenger & Pursuit Lower Triple Clamp Pinch Bolt Torque & Fork Stanchion Engagement

Source: RCAK-25V108-4102.pdf

Mandated Torques:Torque: 24 N·m (17.7 lb-ft) (Lower & Upper Triple Clamp Fork Pinch Bolts)Torque: 75 N·m (55.3 lb-ft) (Front Wheel Axle Nut)Torque: 19 N·m (14.0 lb-ft) (Front Axle Pinch Bolts)Torque: 50 N·m (36.9 lb-ft) (Brembo Radial Caliper Mount Bolts)

Consumable Specs:Anti-Seize Lubricant on Axle ThreadsBrake Pad Contact Paste

Genuine Part Numbers:751994375562145143301

Safety Recall 24V-550 / Bulletin I-24-07PowerPlus 108ci Platform

Indian Challenger & Pursuit Inverted 43mm Fork & Pushrod Architecture

Inverted fork pinch bolts (24 N·m), front axle (75 N·m), Brembo radial calipers (50 N·m), and heavy-duty pushrod link (80 N·m).

Click on Triple Clamps, Front Axle, Rear Pushrod Linkage, or Brembo Caliper to view engineering torque specs.

Bulletin #I-24-03Safety Recall Bulletin I-24-03 / NHTSA 24V-069: Indian FTR 1200 & Challenger Contactless Gear Position Sensor (GPS) Calibration

Source: RCAK-24V069-5821.pdf

Mandated Torques:Torque: 9 N·m (80 in-lb) (Gear Position Sensor Mounting Screws)Torque: 10 N·m (88 in-lb) (Clutch Cable Bracket Bolts)Torque: 20 N·m (14.8 lb-ft) (Shift Linkage Jam Nuts)

Consumable Specs:Dielectric Silicone Grease on Sensor Harness ConnectorLoctite 242 Blue

Genuine Part Numbers:241477540178335415920

Safety Recalls 22V-636 & 24V-069Indian FTR 1200 / S / Rally

Indian FTR 1200 Coolant Junction & Gear Position Sensor Architecture

Coolant junction countermeasure (10 N·m), gear position sensor (9 N·m), Brembo radial bolts (50 N·m), and Bosch ABS 9.1M calibration.

Click on Coolant Junction, Gear Position Sensor, Brembo Calipers, or Bosch ABS ECU to view factory service specifications.

1-Click Factory Service KitOEM Spec Fluid Capacities Matched

Workshop Maintenance Kit & Factory Fluids

Authentic factory-grade motor oil, oil filter, and high-temp brake fluid matched precisely to 2023 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse capacities.

Full Kit Subtotal

$68.95

10W-40 JASO MA2

Silkolene Pro 4 4T Synthetic Oil 10W-40 (4 Liter)

4-Liter Factory Full Jug

Matches factory 10W-40 spec (Oil spec: 4.73 L (5.00 US qt))

Item Price

$68.95

Factory OEM Spark Plug Spec

NGK MR7F

Gap: 0.7–0.8 mm (0.028–0.031 in)

Inspection milestone: Not Available. Exact factory part specification.

Authentic OEM Reference

Search OEM Plugs →

Complete Workshop Maintenance Package3 Essential Service Items

Includes 10W-40 JASO MA2 engine oil (4-Liter Factory Full Jug), high-flow filter & DOT 4 fluid.

Kit Total

$68.95

Explore Other Subsystems for this 2023 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YTX20HL-BS

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 130/60B19 61H • Rear: 180/60R16 80H

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →

← Return to Full Comprehensive Motorcycle Specification Hub (2023 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse)

Looking for direct-fit parts for this 2023 Challenger / Pursuit / Limited / Dark Horse?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts