Dedicated Subsystem WorkbenchPlatform Gen: 2020–2026

2020 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse Fastener Torque Specs & Tightening Matrix

Factory torque specs for 2020 Indian Motorcycle Challenger / Pursuit / Limited / Dark Horse: oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.

Gen 2020–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2026.

Select Model Year:(Active: 2020)

2020 2021 2022 2023 2024 2025 2026

Engine

1768cc

Drive

Not Available

Cooling

Liquid-Cooled

Critical Fastener Torque Tolerances

FSM Certified Specs

Factory workshop tightening torque ratings for axles, calipers, engine plugs, and triple clamps.

Lube:

Fastener / Component	Torque (N·m)	Service Note & Thread Guidance	System
No fasteners matching '' found in this category.

Technical Standard:Always calibrate torque wrenches prior to critical chassis fastening. Values reflect clean, dry threads unless threadlocker or anti-seize is specifically noted.

Official NHTSA Safety Recalls & Technical Bulletins

3 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 3 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #24V550000SUSPENSION:REAR

▼

Defect Description

Polaris Bulletin I-24-07: Rear suspension pushrod may buckle under load on 2024 Challenger and Pursuit models.

Safety Hazard / Consequence

A buckled pushrod can sever the chassis wiring harness, puncture the coolant reservoir, damage the rear tire, or collapse rear suspension.

Factory Remedy & Repair Action

Dealers replace rear suspension pushrod with upgraded forged steel component torqued to 80 N·m.

NHTSA #25V108000FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

▼

NHTSA #24V069000EXTERIOR LIGHTING:BRAKE LIGHTS

▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

3 Documented Bulletins

Bulletin #I-24-07Safety Recall Bulletin I-24-07 / NHTSA 24V-550: Challenger, Pursuit, Chieftain & Springfield Heavy-Duty Rear Suspension Pushrod Replacement

Source: RCAK-24V550-7267.pdf

Mandated Torques:Torque: 80 N·m (59 lb-ft) (Upper & Lower Suspension Pushrod Link Bolts)Torque: 88 N·m (65 lb-ft) (Rear Axle Nut)Torque: 12 N·m (106 in-lb) (Belt Adjuster Jam Nuts)

Consumable Specs:Loctite 243 Medium Strength ThreadlockerMoly Paste 65

Genuine Part Numbers:514489275199827556153

Safety Recall 24V-550 / Bulletin I-24-07PowerPlus 108ci Platform

Indian Challenger & Pursuit Inverted 43mm Fork & Pushrod Architecture

Inverted fork pinch bolts (24 N·m), front axle (75 N·m), Brembo radial calipers (50 N·m), and heavy-duty pushrod link (80 N·m).

Click on Triple Clamps, Front Axle, Rear Pushrod Linkage, or Brembo Caliper to view engineering torque specs.

Bulletin #I-25-01Safety Recall Bulletin I-25-01 / NHTSA 25V-108: Indian Challenger & Pursuit Lower Triple Clamp Pinch Bolt Torque & Fork Stanchion Engagement

Source: RCAK-25V108-4102.pdf

Mandated Torques:Torque: 24 N·m (17.7 lb-ft) (Lower & Upper Triple Clamp Fork Pinch Bolts)Torque: 75 N·m (55.3 lb-ft) (Front Wheel Axle Nut)Torque: 19 N·m (14.0 lb-ft) (Front Axle Pinch Bolts)Torque: 50 N·m (36.9 lb-ft) (Brembo Radial Caliper Mount Bolts)

Consumable Specs:Anti-Seize Lubricant on Axle ThreadsBrake Pad Contact Paste

Genuine Part Numbers:751994375562145143301

Safety Recall 24V-550 / Bulletin I-24-07PowerPlus 108ci Platform

Indian Challenger & Pursuit Inverted 43mm Fork & Pushrod Architecture

Inverted fork pinch bolts (24 N·m), front axle (75 N·m), Brembo radial calipers (50 N·m), and heavy-duty pushrod link (80 N·m).

Click on Triple Clamps, Front Axle, Rear Pushrod Linkage, or Brembo Caliper to view engineering torque specs.

Bulletin #I-24-03Safety Recall Bulletin I-24-03 / NHTSA 24V-069: Indian FTR 1200 & Challenger Contactless Gear Position Sensor (GPS) Calibration

Source: RCAK-24V069-5821.pdf

Mandated Torques:Torque: 9 N·m (80 in-lb) (Gear Position Sensor Mounting Screws)Torque: 10 N·m (88 in-lb) (Clutch Cable Bracket Bolts)Torque: 20 N·m (14.8 lb-ft) (Shift Linkage Jam Nuts)

Consumable Specs:Dielectric Silicone Grease on Sensor Harness ConnectorLoctite 242 Blue

Genuine Part Numbers:241477540178335415920

Safety Recalls 22V-636 & 24V-069Indian FTR 1200 / S / Rally