Dedicated Subsystem WorkbenchPlatform Gen: 2021–2026

2021 Honda Rebel 1100 (CMX1100) Valve Clearance Specs & Shim Calculator

Cold valve clearance specs for 2021 Honda Rebel 1100 (CMX1100): intake mm, exhaust mm, inspection intervals and replacement shim calculator.

Gen 2021–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2021 through 2026.

Select Model Year:(Active: 2021)

2021 2022 2023 2024 2025 2026

Engine

1084cc

Drive

525

Cooling

Liquid-Cooled

Factory Valve Clearance & Shim Calculator

OEM Workshop Tolerances

Cylinder head valve lash specifications, timing TDC mark alignments, and interactive replacement shim calculation engine.

Adjustment Mechanism: 9.48 mm

Active Valve Range (INTAKE)

0.12 - 0.20 mm

0.005 - 0.008 in

Nominal Mid-Spec Target

0.16 mm

Ideal cold lash assembly setting

Shim Diameter / Tappet

9.48 mm

Bucket-and-shim interface

Measurement Condition

Cold Engine (≤ 35°C / 95°F)

TDC compression stroke only

Interactive Shim Sizing Calculation Engine: New Shim = Current Shim + (Measured Clearance - Target Clearance)

1. Feeler Gauge Measured Clearance (mm)

Factory intake tolerance: 0.12 - 0.20 mm

2. Currently Installed Shim (mm)

Measured with micrometer or read laser-etched face

TDC Crankshaft Timing Index

Align crankshaft TDC mark with engine timing index pointer

Feeler Gauge Technique

Angled blade feeler gauge (cold engine ≤ 35°C / 95°F)

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #21V987000ENGINE AND ENGINE COOLING:COOLING SYSTEM:RADIATOR ASSEMBLY

Received: 16/12/2021▼

Defect Description

Honda (American Honda Motor Co.) is recalling certain 2021 Honda Rebel 1100 (CMX1100) motorcycles. The radiator cap may have been improperly formed during manufacturing, which could create an insufficient seal.

Safety Hazard / Consequence

An insufficiently sealed radiator cap may leak or spray hot coolant, increasing the risk of injury or crash.

Factory Remedy & Repair Action

Dealers will replace the radiator cap and refill any lost coolant, free of charge. Owner notification letters were mailed February 22, 2022. Owners may contact Honda service at 1-888-234-2138. Honda's number for this recall is KN1.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.