Factory Workshop SpecificationsPlatform Gen: 2010–2026

2026 Honda PCX 125 / PCX 150 / PCX 160 Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Gen 2010–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2010 through 2026.

Select Model Year:(Active: 2026)

2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Engine

157cc

Drive

Not Available

Cooling

Liquid-Cooled with Compact Side-Mounted Radiator & Built-in Engine Fan

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2026 Honda PCX 125 / PCX 150 / PCX 160.

10 Dedicated Engineering Spoke Pages

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 0.90 L (0.95 US qt) [0.80 L at drain / oil strainer screen clean] • Coolant: 0.54 L (0.57 US qt) [Reserve Tank 0.16 L] • Brake: N/A

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YTZ8V

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 110/70-14 M/C 50P (PCX160) / 100/80-14 (PCX150) • Rear: 130/70-13 M/C 63P (PCX160) / 120/70-14 (PCX150)

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →

Fluids & Service Capacities

Shop Fluids →

Engine Oil (Drain & Filter Change)0.90 L (0.95 US qt) [0.80 L at drain / oil strainer screen clean]

Engine Oil (Drain Only)N/A

Recommended Oil ViscosityPro Honda GN4 / HP4 10W-30 4-Stroke Motorcycle Oil (JASO MB / MA, API SG/SL)

Coolant System Capacity0.54 L (0.57 US qt) [Reserve Tank 0.16 L]

Brake Fluid StandardNot Available

Drivetrain, Chain & Gearing

Gearing Calculator →Shop Chains & Sprockets →

Drive Chain PitchBelt Drive

Chain Link CountN/A

Front Sprocket TeethN/A

Rear Sprocket TeethN/A

Final Drive ConfigurationCarbon Belt Drive

Ignition & Electrical Specifications

Shop Plugs & Batteries →

OEM Spark Plug Part NumberNGK LMAR8L-9

Electrode Spark Plug Gap0.8–0.9 mm (0.031–0.035 in)

OEM Battery Reference CodeYTZ8V

Battery Output & RatingNot Available

Spark Plug Inspection IntervalN/A

Wheels, Tires & Inflation Pressures

Shop Tires →

Front Tire Dimensions110/70-14 M/C 50P (PCX160) / 100/80-14 (PCX150)

Cold Front Inflation PressureN/A

Rear Tire Dimensions130/70-13 M/C 63P (PCX160) / 120/70-14 (PCX150)

Cold Rear Inflation PressureN/A

OEM Wheel Rim Widths (F / R)3.50" / 5.50"

Official NHTSA Safety Recalls & Technical Bulletins

1 Active Campaign

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 1 safety recall campaign associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #EQUIPMENT:OTHER:ACCESSORIES

▼

Defect Description

American Honda Motor Co. recalled certain Honda Genuine Accessory 35L Top Box mounting kits for PCX150 scooters. Repeated road vibrations may cause the rear carrier mounting bolts to loosen.

Safety Hazard / Consequence

The rear carrier and luggage box could become loose or detach from the vehicle while in motion, creating a road hazard.

Factory Remedy & Repair Action

Honda dealers inspect and replace the mounting hardware with newly designed lock-washers and threadlocker, free of charge.

Manufacturer Notes: NHTSA Campaign 16E-023.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

1 Documented Bulletin

Bulletin #FSB-HON-PCX-01Technical Service Bulletin FSB-HON-PCX-01: eSP / eSP+ Cooling System Refill & Bleed, Engine Oil Strainer Screen Cleaning & CVT Pulley Torque Procedure

Source: Honda_PCX150_PCX160_eSP_Cooling_Maintenance.pdf

Mandated Torques:Torque: 20 N·m (15 lb-ft) (Engine Oil Strainer Screen Cap - 17mm Hex)Torque: 59 N·m (44 lb-ft) (Primary Movable Drive Face Pulley Nut)Torque: 49 N·m (36 lb-ft) (Driven Clutch Pulley Outer Nut)Torque: 10 N·m (88 in-lb) (Coolant Bleed Screw on Thermostat Flange)

Consumable Specs:Pro Honda HP Coolant 50/50 Pre-MixPro Honda GN4 10W-30 Motorcycle OilOil Strainer Cap O-Ring (30.8 x 3 mm, P/N 91302-001-020)

Genuine Part Numbers:12361-035-00015421-107-00091302-001-02023100-K0S-V01

Honda eSP+ ArchitecturePCX 125 / 150 / 160

Honda PCX eSP+ Liquid-Cooling Circuit, Oil Strainer & CVT Architecture

Side-mounted radiator (0.54L), bleed screw 10 N·m, bottom oil strainer cap 20 N·m, drive face nut 59 N·m, and clutch nut 49 N·m.

Click on Air Bleed Screw, Side Radiator, Bottom Strainer Cap, Drive Face Nut, or Clutch Nut to inspect factory maintenance specs.

Looking for direct-fit parts for this 2026 PCX 125 / PCX 150 / PCX 160?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts