Dedicated Subsystem WorkbenchPlatform Gen: 2008–2026

2023 Honda CBR1000RR Fuse Box Diagram, Amperages & Relay Diagnostics

Complete fuse box location, blade fuse slot mappings, ISO color codes, blown fuse symptoms and dark current parasitic drain testing for 2023 Honda CBR1000RR.

Technical PassportOEM VERIFIED

Engine

999cc

Cooling

Liquid-Cooled

Final Drive

525 Chain

Engine Oil

3.00 L (3.17 US qt)

Spark Plug

NGK IMR9E-9HES

Front Tire

120/70ZR17

Gen 2008–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2008 through 2026.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available

1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2023 Honda CBR1000RR.

Configure Service Bundles→

Select Model Year:(Active: 2023)
19 Production Years (2008–2026)

2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Suggested Items3 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

CIRCUIT HEALTH DECKMain: 30A Blade / Starter Magnetic SwitchSpec: < 1.5 mA Quiescent

FUSE BOX, RELAY ASSIGNMENTS & PARASITIC DRAIN ISOLATOR

Fuse & Relay Location: Fuse box located under front seat or behind left side cover; Main 30A fuse integrated into starter magnetic switch near battery.

Select Fuse to Inspect Circuits & Failure SymptomsFormat: Mini Blade (ATM)

10A

SLOT: IGNITION

PGM-FI & Ignition

Rating: 10 Amps

Downstream Protected Components:

Engine Control Module (ECM)Ignition CoilsCrank Sensor

Mechanic Diagnostic: Symptoms If Blown

Starter motor cranks engine but no ignition spark occurs.

Shop Replacement Fuses

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2023 Honda CBR1000RR platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

3 Documented Bulletins

Bulletin #HON-22V061Safety Recall KN3 (MTB 17819): CBR1000RR Oil Cooler Outlet Pipe Radiant Heat Guard

Source: Honda_CBR1000RR_Recall22V061_KN3_OilCoolerPipe.pdf

Mandated Torques:Torque: 10 N·m (7 lbf·ft) (Radiator Stay U-Nuts)Torque: 10 N·m (7 lbf·ft) (Engine Oil Pipe Flange Bolt - 1/4" U-Joint)Torque: 10 N·m (7 lbf·ft) (Oil Cooler Union Flange Bolts)

Consumable Specs:Fresh 4-Stroke Engine Oil on New Viton O-RingsGenuine Replacement Viton O-Rings (Engine & Cooler Ports)

Genuine Part Numbers:06156-MKR-30506156-MKR-306

FIREBLADE THERMAL SHIELDINGExploded View: Oil Cooler Pipe & Exhaust Heat Guard (Safety Recall 22V-061 / KN3)

Kit # 06156-MKR-305 • 10 N·m All Bolts • 1/4" U-Joint Access • Viton Pre-Lube

INSPECTION TARGETRecall 22V-061 / KN3

Countermeasure Heat Guard Set (Recall 22V-061 / KN3)

Genuine Kit # 06156-MKR-305 / 06156-MKR-306

FACTORY WORKSHOP SPECIFICATION:

10 N·m (7 lbf·ft) U-Nuts

CRITICAL WORKSHOP PROCEDURE:

CRITICAL RECALL SAFETY COUNTERMEASURE (Recall 22V-061 / Service Bulletin MTB 17819). Extended 1st gear operation above 5,000 rpm causes exhaust radiant heat to melt the oil cooler outlet pipe. The heat guard installs directly between the #2/#3 header pipes and the oil lines.

Interactive Assembly Nodes:

Bulletin #HON-21V249Safety Recall KL9 (MTB 17684): CBR1000RR Rear Cushion Connecting Plates Inverted Stamping

Source: Honda_CBR1000RR_Recall21V249_KL9_RearCushionPlates.pdf

Mandated Torques:Torque: 44 N·m (32 lbf·ft) (Rear Cushion Connecting Plate Mounting Nuts)Torque: 44 N·m (32 lbf·ft) (Rear Cushion Arm to Frame Bolt)Torque: 44 N·m (32 lbf·ft) (Lower Shock Absorber Mount Bolt)

Consumable Specs:Extreme Pressure Molybdenum Grease on Pivot Collar BushingsPro Honda Threadlocker on Linkage Hardware

Genuine Part Numbers:52463-MKR-D1052464-MKR-D10

PRO-LINK SUSPENSIONInspection Schematic: Rear Cushion Connecting Plates Orientation (Safety Recall 21V-249 / KL9)

Part # 52471-MKR-D10 • Bore Faces OUTSIDE • 44 N·m Pivot Nut • Recessed Bolt Mandate

INSPECTION TARGETRecall 21V-249 / KL9

Bore Counterbore Orientation (Mandatory Rule)

Bores of Left & Right Plates MUST Face Outside

FACTORY WORKSHOP SPECIFICATION:

Recessed Bolt Head / Nut Clearance

CRITICAL WORKSHOP PROCEDURE:

CRITICAL RECALL INSPECTION (Recall 21V-249 / Bulletin KL9). Visually verify that the machined counterbores face OUTSIDE. The bolt head and nut MUST recess cleanly into the plate bores. If flat face is facing outside, plates were installed backwards at the factory and will bind and fracture.

Interactive Assembly Nodes:

Bulletin #HON-24V113Safety Recall KP8/KP9/KQ0: CBR1000RR & CBR600RR Denso Fuel Pump Impeller Deformation

Source: Honda_CBR1000RR_Recall24V113_KP9_FuelPump.pdf

Mandated Torques:Torque: 12 N·m (9 lbf·ft) (Fuel Pump Mounting Nuts - Crisscross 2-3 Stages)Torque: 10 N·m (7 lbf·ft) (Fuel Tank Pivot & Front Mount Bolts)

Consumable Specs:Genuine Fuel Pump O-Ring / Molded Tank Base PackingHigh-Pressure Fuel Feed Hose Quick-Connect Retainer Clip

Genuine Part Numbers:06160-MKR-30506160-MFL-30506160-MFJ-305

FUEL DELIVERY SYSTEMExploded View: In-Tank Fuel Pump & High-Density Impeller (Safety Recall 24V-113 / KP9 & KQ0)

Kits # 06160-MKF-305 / 06160-MFJ-305 • 12 N·m Base Nuts • 22 N·m Banjo • Anti-Swelling Impeller

INSPECTION TARGETRecall 24V-113 / KP9 & KQ0

Replacement Fuel Pump Module with High-Density Impeller

Genuine Kit # 06160-MKF-305 / 06160-MFJ-305

FACTORY WORKSHOP SPECIFICATION:

Critical Recall Safety Countermeasure

CRITICAL WORKSHOP PROCEDURE:

CRITICAL RECALL COUNTERMEASURE (Recall 24V-113 / Bulletins KP9 & KQ0). Original low-density resin impellers absorbed solvent from automotive fuels, swelling and binding against the pump casing to cause sudden engine shutdown while riding. Replacement module features reinforced high-density resin impeller.