Skip to Main Content
Free Shipping Over $15030-Day Returns
800-288-0640
Free Shipping $150+30-Day Returns800-288-0640
Shop Parts For This Ride →
Factory Workshop SpecificationsPlatform Gen: 1999–2006

2006 Harley Davidson Twin Cam 88 (Dyna / Softail / Touring) Specifications & Consumables

Official workshop technical reference: fluid capacities, spark plug codes, drive chain specs, and tire inflation pressures.

Gen 1999–2006

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 1999 through 2006.

Select Model Year:(Active: 2006)
Engine
1450cc
Drive
Not Available
Cooling
Air-Cooled

Engineering Subsystem Workbenches & Calculators

Dedicated deep-dive diagnostic tools, torque matrices, wiring pinouts, and calculators tailored for 2006 Harley Davidson Twin Cam 88 (Dyna / Softail / Touring).

10 Dedicated Engineering Spoke Pages
Fluids & Service Capacities
Shop Fluids →
Engine Oil (Drain & Filter Change)3.30 L (3.50 US qt)
Engine Oil (Drain Only)2.84 L (3.00 US qt)
Recommended Oil Viscosity20W-50 V-Twin Motorcycle Oil API CI-4/JASO MA2
Coolant System CapacityN/A
Brake Fluid StandardDOT 5 Silicone-Based (1999-2004/05) - NEVER mix DOT 5 with DOT 4
Drive Chain PitchBelt Drive
Chain Link Count133 Links
Front Sprocket Teeth32T
Rear Sprocket Teeth70T
Final Drive ConfigurationCarbon Belt Drive
Ignition & Electrical Specifications
Shop Plugs & Batteries →
OEM Spark Plug Part NumberHD 6R12 / Champion RA8HC / NGK DCPR7E
Electrode Spark Plug Gap0.97 - 1.09 mm (0.038 - 0.043 in)
OEM Battery Reference CodeYTX20L-BS / YIX30L-BS
Battery Output & Rating12V 18Ah/30Ah (310 - 385+ CCA)
Spark Plug Inspection Interval10,000 mi (16,000 km) miles
Wheels, Tires & Inflation Pressures
Shop Tires →
Front Tire DimensionsMT90B16 (Touring) / 100/90-19 (Dyna)
Cold Front Inflation Pressure36 PSI (Cold)
Rear Tire DimensionsMU85B16 (Touring) / 130/90-16 or 150/80B16 (Dyna/Softail)
Cold Rear Inflation Pressure40 PSI (Cold)
OEM Wheel Rim Widths (F / R)3.00" / 3.50"

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
No Active Federal Safety Recalls Reported
The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2006 Harley Davidson Twin Cam 88 (Dyna / Softail / Touring) platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

5 Documented Bulletins
Bulletin #M1524M1524: RECALL 0177 - 2019 - 2021 SPORTSTER - HEADLAMP BULB SHIELD
Source: Harley_M1524_Recall0177.pdf
Mandated Torques:Torque: 5.8–6 in-lbs (0.66–0.68 N·m) (Bulb Shield Screw)Torque: 35–44 in-lbs (4–5 N·m) (Bracket to Visor Screws)Torque: 10–16 ft-lbs (13.5–21.6 N·m) (Visor Bracket Screws)
Consumable Specs:Loctite 243 Medium Strength Blue Threadlocker (HD Part # 99642-97)
Genuine Part Numbers:68297-05A9150010799642-97
Fastener Stack ArchitectureExploded View: Headlamp Visor Fastener & Vibration Stack (Bulletin M1524)
3-Stage Torque Map
1. Triple Clamp Bolts (10–16 ft-lb)2. Cast Visor Eyebrow3. Visor Screws (35–44 in-lb)4. Matte Bulb Shield (91500107)5. Shield Screw: 5.8–6.0 in-lb (Loctite 243)6. H4 Quartz Bulb & SocketSelect any fastener or shield component to inspect exact torque specifications.
Component InspectorNHTSA Recall 0177 / M1524

Self-Tapping Shield Screw with Blue Loctite 243

Consumable: Loctite 243 (HD # 99642-97)
Factory Torque Specification
5.8–6.0 in-lbs (0.66–0.68 N·m) (CRITICAL LOW TORQUE)
Technical Assembly Note
MUST apply Loctite 243 Blue Threadlocker. Due to reuse of self-tapping screw into stamped bracket, STRICTLY do not exceed 6 in-lbs or threads will strip.
Vibration & Chemical Retention
Loctite 243 Medium Strength Blue Threadlocker (HD Part # 99642-97) mandatory on bulb shield screw to prevent thermal loosening.
Bulletin #Recall0171Part 573 Safety Recall Report 18V-076: ABS Hydraulic Control Unit Flush & Fluid Replacement
Source: Harley_Recall0171_ABS_4574.pdf
Mandated Torques:Torque: 17–22 ft-lbs (23.0–30.0 N·m) (ABS Manifold / Caliper Banjo Bolts)Torque: 35–61 in-lbs (4.0–6.9 N·m) (Brake Caliper Bleeder Screws)
Consumable Specs:Harley-Davidson Platinum Label DOT 4 Brake Fluid
Genuine Part Numbers:41731-01
Bulletin #M1167Safety Recall 0118: Fuel Valve Petcock Standpipe Inversion Inspection & Replacement
Source: Harley_M1167_Recall0118.pdf
Mandated Torques:Torque: 15–20 ft-lbs (20.3–27.1 N·m) (Fuel Valve Petcock Bung Nut)
Consumable Specs:PTFE Fuel-Resistant Thread SealantViton O-Ring Fuel Gasket
Genuine Part Numbers:61338-0262169-02A61338-94D62169-95C
Hydraulic Fuel Valve SchematicExploded View: Fuel Shut-Off Valve & Standpipe (Recall 0118 / Bulletin M1167)
Torque: 15–20 ft-lbs • PTFE Sealant
TANK BUNG PORTREVERSED FLOW ORIFICE15–20 FT-LBVALVE BODY (REVISED)VACUUM CUTOFF TAP
Click standpipe, collar nut, or vacuum tap to inspect Recall 0118 specs
Inspection TargetRecall 0118 / ML-426

Reserve Standpipe Tube (Defect Analysis)

Suspect Codes: 61338-02, 62169-02A, 61338-94D
Mechanical Engagement:Internal Hydraulic Passage
RECALL 0118 DEFECT LOCUS. Supplier inverted the valve rotor passages. Setting lever to ON drew fuel through the short bottom reserve hole, while RESERVE drew from the tall standpipe, leaving rider with zero reserve fuel.
Interactive Assembly Nodes:
Bulletin #M1171Safety Recall 0120: 2005 Police FLHTPI / FLHPI / FLHPEI ABS Hydraulic Line Inversion
Source: Harley_M1171_Recall0120.pdf
Mandated Torques:Torque: 17–22 ft-lbs (23–30 N·m) (ABS Manifold Banjo Bolts)
Consumable Specs:Harley-Davidson Platinum Label DOT 4 Brake Fluid
Genuine Part Numbers:41731-0142865-05
Bulletin #M1183Safety Recall 0124: 2006 Dyna 6-Speed Transmission False-Neutral Shaft & Shifter Fork Replacement
Source: Harley_M1183_Recall0124.pdf
Mandated Torques:Torque: 7–9 ft-lbs (9.5–12.2 N·m) (Transmission Top Cover Screws)Torque: 10–13 ft-lbs (13.6–17.6 N·m) (Detent Spring Retaining Bolt)
Consumable Specs:Harley-Davidson Formula+ Transmission and Primary Chaincase LubricantLoctite 243 Medium Strength Blue Threadlocker (HD Part # 99642-97)
Genuine Part Numbers:34430-0633333-0635652-06Kit Code 0124
Transmission Mechanism SchematicExploded View: 6-Speed Shift Detent Assembly (Recall 0124 / Bulletin M1183)
10–13 ft-lb Detent • 7–9 ft-lb Cover
TOP COVER (7–9 FT-LB)MOLDED GASKET # 35652-0610-13 FT-LBRECALL SPRINGROLLER DETENT ARM6-SPEED STAR WHEEL
Click detent arm, centering spring, pivot bolt, or star wheel to view specs
Inspection TargetRecall 0124 / M1183

Revised Roller Shift Detent Arm Assembly

Remedy Kit Code 0124 (Part # 34430-06)
Mechanical Engagement:Free Roller Rotation
MANDATORY RECALL REPLACEMENT. Features low-friction hardened roller bearing that glides into star wheel valleys, locking transmission securely in gear.
Interactive Assembly Nodes:

Looking for direct-fit parts for this 2006 Twin Cam 88 (Dyna / Softail / Touring)?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts
2006 Harley Davidson Twin Cam 88 (Dyna / Softail / Touring) Factory Workshop Specs & Maintenance Guide | WowShopper | WowShopper Motorsports