Dedicated Subsystem WorkbenchPlatform Gen: 2020–2024

2024 Harley Davidson Low Rider S (FXLRS Milwaukee-Eight) Fuse Box Diagram, Amperages & Relay Diagnostics

Complete fuse box location, blade fuse slot mappings, ISO color codes, blown fuse symptoms and dark current parasitic drain testing for 2024 Harley Davidson Low Rider S (FXLRS Milwaukee-Eight).

Technical PassportOEM VERIFIED

Engine

1868cc

Cooling

Air/Oil-Cooled

Final Drive

Belt Drive

Engine Oil

4.70 L (5.00 US qt)

Spark Plug

Harley 6R10 / NGK CPR7EA-9

Front Tire

110/90B19

Browse Flagship Teardowns →

Gen 2020–2024

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2024.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available

1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2024 Harley Davidson Low Rider S (FXLRS Milwaukee-Eight).

Configure Service Bundles→

Select Model Year:(Active: 2024)
5 Production Years (2020–2024)

2020 2021 2022 2023 2024

Suggested Items3 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

CIRCUIT HEALTH DECKMain: 50A Maxi-FuseSpec: < 3.5 mA Quiescent

FUSE BOX, RELAY ASSIGNMENTS & PARASITIC DRAIN ISOLATOR

Fuse & Relay Location: Main fuse / BCM located behind left side cover; Main 40A/50A Maxi-Fuse mounted in dedicated holder adjacent to battery tray.

Select Fuse to Inspect Circuits & Failure SymptomsFormat: Maxi Blade (MAX) + Micro/Mini Blade

15A

SLOT: BATTERY

Constant Battery Feed

Rating: 15 Amps

Downstream Protected Components:

BCM Keep-Alive MemorySpeedometer ClockSecurity Siren Module

Mechanic Diagnostic: Symptoms If Blown

Security system faults; odometer clock resets on shutdown.

Shop Replacement Fuses

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2024 Harley Davidson Low Rider S (FXLRS Milwaukee-Eight) platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

4 Documented Bulletins

Bulletin #M1524M1524: RECALL 0177 - 2019 - 2021 SPORTSTER - HEADLAMP BULB SHIELD

Source: Harley_M1524_Recall0177.pdf

Mandated Torques:Torque: 5.8–6 in-lbs (0.66–0.68 N·m) (Bulb Shield Screw)Torque: 35–44 in-lbs (4–5 N·m) (Bracket to Visor Screws)Torque: 10–16 ft-lbs (13.5–21.6 N·m) (Visor Bracket Screws)

Consumable Specs:Loctite 243 Medium Strength Blue Threadlocker (HD Part # 99642-97)

Genuine Part Numbers:68297-05A9150010799642-97

Fastener Stack ArchitectureExploded View: Headlamp Visor Fastener & Vibration Stack (Bulletin M1524)

3-Stage Torque Map

Select any fastener or shield component to inspect exact torque specifications.

Component InspectorNHTSA Recall 0177 / M1524

Self-Tapping Shield Screw with Blue Loctite 243

Consumable: Loctite 243 (HD # 99642-97)

Factory Torque Specification

5.8–6.0 in-lbs (0.66–0.68 N·m) (CRITICAL LOW TORQUE)

Technical Assembly Note

MUST apply Loctite 243 Blue Threadlocker. Due to reuse of self-tapping screw into stamped bracket, STRICTLY do not exceed 6 in-lbs or threads will strip.

Vibration & Chemical Retention

Loctite 243 Medium Strength Blue Threadlocker (HD Part # 99642-97) mandatory on bulb shield screw to prevent thermal loosening.

Bulletin #M1568M1568: SAFETY RECALL 0635 - FRONT BRAKE LINE BANJO BOLT ASSEMBLY

Source: Harley_M1568_Recall0635.pdf

Mandated Torques:Torque: 19–21 ft-lbs (25.8–28.5 N·m) (Front Brake Line Banjo Bolts)

Consumable Specs:Harley-Davidson Platinum Label DOT 4 Brake Fluid

Genuine Part Numbers:2879401841751-06A41800770418007724180077341800774

Technical IllustrationExploded View: Hydraulic Brake Switch & Banjo Bolt Assembly

Official NHTSA PDF

Hover or Click Component to Inspect

Component SelectedOEM # 41747-06

Cross-Drilled Banjo Bolt

Cross-drilled hydraulic passage. Torque to exact factory range. Do NOT over-tighten or bolt can shear.

Torque Specification:19–21 ft-lbs (25.5–28.5 N·m)

Select Stack Layer:

Electrical Harness Schematic40-Pin BCM Electrical Harness Pinout & Wiring Map (Bulletin M1568 / Recall 0635)

40-Way Sealed Header • Cavity F3

Click Pin F3 or center keyway to inspect technical harness specifications

Inspection TargetRecall 0635 / M1568

BCM Terminal Cavity F3 (Recall Signal Input)

Jumper Terminal Wire # 69203239

Mechanical Engagement:Terminal Click-Lock Retention

MANDATORY RECALL PIN INSERTION. Insert jumper terminal into cavity F3 of the 40-way BCM harness connector until an audible click is heard. Tug lightly to verify positive secondary terminal engagement.

Interactive Circuit Nodes:

STEP 1: HARNESS CLICK VERIFICATIONSlide terminal wire 69203239 into Cavity F3 until secondary TPA wedge clicks flush. Perform gentle pull test.

STEP 2: CHASSIS GROUND TORQUEClean left-side frame ground stud. Fasten jumper ring terminal to 45–60 in-lbs (5.1–6.8 N·m).

STEP 3: DIGITAL TECHNICIAN II SYNCFlash BCM software to 28794018 YM0+. Depress rear brake pedal to trigger auto-stop calibration countdown.

Chassis Routing ArchitectureTrike Frame Jumper Wire Routing & EHCU Ground Map (Bulletin M1568 / Recall 0635)

Figures 5 & 6 • Behind EHCU

Click routing channel, ground stud, cable straps, or switch to view shop notes

Chassis Routing NodeRecall 0635 / M1568

Under-Tray Sub-Harness Route (Behind EHCU)

Recall Routing Path (Figure 6)

Mechanical Anchor:Protected Chassis Channel

MANDATORY ROUTING CLEARANCE. Route jumper harness # 69203239 behind the Electro-Hydraulic Control Unit (EHCU) assembly. Keep clear of hot exhaust pipes and moving suspension linkages.