Skip to Main Content
Free Shipping Over $15030-Day Returns
Free Shipping $150+30-Day Returns
Dedicated Subsystem WorkbenchPlatform Gen: 1990–2026

2022 Harley-Davidson Fat Boy / Fat Boy 114 (FLSTF / FLFB / FLFBS) Throttle Body Synchronization & Fuel Delivery

Multi-cylinder vacuum sync specs, idle speed, EFI high-pressure fuel rail PSI, and injector resistance multimeter bench for 2022 Harley-Davidson Fat Boy / Fat Boy 114 (FLSTF / FLFB / FLFBS).

Technical PassportOEM VERIFIED
Engine
1868cc
Cooling
Air / Oil-Cooled with Dual Internal Counterbalancers
Final Drive
Belt Drive
Engine Oil
4.70 L (5.00 US qt)
Spark Plug
H-D 6R10 / 6R12
Front Tire
160/60R18 70V
Gen 1990–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 1990 through 2026.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available
1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2022 Harley-Davidson Fat Boy / Fat Boy 114 (FLSTF / FLFB / FLFBS).
Configure Service Bundles→
Select Model Year:(Active: 2022)
37 Production Years (1990–2026)
Suggested Items4 Verified Workshop Consumables Available for this Job
View Suggested Items ↓

Official NHTSA Safety Recalls & Technical Bulletins

3 Active Campaigns
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
The U.S. National Highway Traffic Safety Administration reports 3 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.
NHTSA #25V375000SUSPENSION:REAR:SHOCK ABSORBER
▼
Defect Description

Harley Safety Recall 0188: 2018–2024 Softail rear shock pre-load adjuster mounting tab can fracture under vibration, potentially allowing adjuster to contact rear tire.

Safety Hazard / Consequence

Contact between adjuster body and rear tire can cause tire damage, sudden loss of tire pressure, and loss of vehicle control.

Factory Remedy & Repair Action

Dealers install a reinforced retention bracket kit free of charge.

NHTSA #23V591000SUSPENSION:REAR:SHOCK ABSORBER
▼
NHTSA #18V734000POWER TRAIN:CLUTCH ASSEMBLY
▼
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins
Bulletin #HD-0181Safety Recall Bulletin 0181 & 0182 / NHTSA 23V-591: Softail Rear Shock Absorber Pre-Load Fastener Rear Tire Contact
Source: RCLRPT-23V591-6615.PDF
Mandated Torques:Torque: 12–15 N·m (106–133 in-lb) (Pre-load Adjuster Bracket Mounting Screw)Torque: 95–108 N·m (70–80 lb-ft) (Upper & Lower Shock Eye Mount Bolts)Torque: 136–149 N·m (100–110 lb-ft) (Rear Axle Cone Nut)
Consumable Specs:Loctite 243 Medium Strength Blue ThreadlockerIsopropyl Alcohol Surface Cleaner
Genuine Part Numbers:102008499150010454000142
Recalls 0181 & 0188 • NHTSA 23V-591 & 25V-375

Harley-Davidson Softail Mono-Shock Pre-Load Adjuster & Tire Clearance Architecture

Fast adjuster bracket reinforcement, tire clearance inspection (≥ 10 mm), and 95–108 N·m shock mounting torques.

SOFTAIL HIDDEN MONO-SHOCK CHASSISFRONT EYE: 95-108 N·mREAR EYE: 95-108 N·mKNOB (0-5)BRACKET: 12-15 N·mLOCTITE 243 BLUE240mm REAR TIREGAP ≥ 10 mmMANDATED SERVICE & RECALL PROTOCOL:• Fastener: Retorque adjuster screw to 12–15 N·m (106–133 in-lb) with Loctite 243 Blue.• Bracket Kit: Install reinforced retention bracket (Recall 0188 countermeasure).• Clearance: Verify ≥ 10 mm air gap between adjuster knob and tire across full stroke.
Shock Mounting Bolts95–108 N·m (70–80 lb-ft)
Adjuster Bracket Screw12–15 N·m (106–133 in-lb)
Chemical ThreadlockerLoctite 243 (Medium Blue)
Dynamic Tire Clearance≥ 10.0 mm (0.39 in)
Bulletin #HD-TSB-21-04Technical Service Bulletin TSB-21-04: Fat Boy Solid Lakester Wheel Hub, 240mm Rear Tire & Pulley Torques
Source: H-D_TSB_21-04_Lakester_Hub.pdf
Mandated Torques:Torque: 75–88 N·m (55–65 lb-ft) + 45°–50° Turn (Rear Driven Pulley Bolts - Loctite 262 Red)Torque: 41–47 N·m (30–35 lb-ft) (Front & Rear Brake Rotor Torx Screws - Loctite 243 Blue)Torque: 136–149 N·m (100–110 lb-ft) (Rear Axle Cone Washer & Nut)Torque: 102 N·m (75 lb-ft) (Front Axle)Torque: 24–27 N·m (18–20 lb-ft) (Front Axle Pinch Bolts)
Consumable Specs:Loctite 262 High-Strength Red Threadlocker (Pulley Bolts)Loctite 243 Medium-Strength Blue Threadlocker (Rotor Screws)Anti-Seize Lubricant (Axle Shafts)
Genuine Part Numbers:410003913700021441500147
Fat Boy Icon • Lakester Solid Disc Driveline

Harley-Davidson Fat Boy Solid Lakester Wheel & 240mm Rear Driveline Hub Assembly

Cast solid disc wheel torques, 240/40R18 rear tire specs, 136–149 N·m rear axle, and driven pulley angle torque.

REAR AXLE NUT: 136-149 N·m(100-110 lb-ft) CONE WASHER66T / 68T DRIVEN PULLEYBOLTS: 75-88 N·m + 45°-50°(LOCTITE 262 RED • NEW BOLTS)292mm REAR ROTORBOLTS: 41-47 N·m(30-35 lb-ft • LOCTITE 243)FAT BOY DRIVELINE SPECS:• Front Rim: 18 x 4.5 in Lakester• Rear Rim: 18 x 8.0 in Lakester• Front Tire: 160/60R18 (36 psi)• Rear Tire: 240/40R18 (42 psi)• Front Axle Nut: 102 N·m• Front Pinch Bolt: 24–27 N·m• Rear Axle Nut: 136–149 N·m• Pulley Bolts: 75–88 N·m + 45°• Rotor Bolts: 41–47 N·m• Belt Deflection: 9.5–12.7 mm• Bearing End Play: < 0.05 mm• Caliper Mounts: 38–52 N·m
Rear Axle Nut136–149 N·m (100–110 lb-ft)
Driven Pulley Bolts75–88 N·m + 45°–50° Turn
Brake Rotor Screws41–47 N·m (30–35 lb-ft)
Front Axle Nut102 N·m (75 lb-ft)

Explore Other Subsystems for this 2022 Harley-Davidson Fat Boy / Fat Boy 114 (FLSTF / FLFB / FLFBS)

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview
← Return to Full Comprehensive Motorcycle Specification Hub (2022 Harley-Davidson Fat Boy / Fat Boy 114 (FLSTF / FLFB / FLFBS))

Looking for direct-fit parts for this 2022 Fat Boy / Fat Boy 114 (FLSTF / FLFB / FLFBS)?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts