Free Shipping Over $15030-Day Returns
Free Shipping $150+30-Day Returns
WOWSHOPPERMOTORSPORTS
← Full Motorcycle OverviewShop Parts For This Ride →
Dedicated Subsystem WorkbenchPlatform Gen: 2013–2026

2022 Harley-Davidson Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS) Charging System, Stator AC Output & Battery Health

Stator 3-phase AC voltage at 5,000 RPM, coil resistance, regulated DC voltage, battery code YTX20HL-BS / H-D 65989-97E, CCA rating, and multimeter charging diagnostic steps for 2022 Harley-Davidson Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS).

Technical PassportOEM VERIFIED
Engine
1923cc
Cooling
Air / Oil-Cooled with Dual Internal Counterbalancers
Final Drive
Belt Drive
Engine Oil
4.70 L (5.00 US qt)
Spark Plug
H-D 6R10 / 6R12
Front Tire
130/60B21 63H
Browse Flagship Teardowns →
Gen 2013–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2013 through 2026.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available
1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2022 Harley-Davidson Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS).
Configure Service Bundles→
Select Model Year:(Active: 2022)
14 Production Years (2013–2026)
Suggested Items3 Verified Workshop Consumables Available for this Job
View Suggested Items ↓

3-Phase Charging System & Battery Diagnostic Flowchart

Yuasa & OEM Standards
Multimeter troubleshooting protocols, cold cranking amps (CCA) ratings, 3-phase stator AC outputs, and regulator-rectifier health verification.
Shop YTX20HL-BS / H-D 65989-97E Batteries
OEM Battery Code
YTX20HL-BS / H-D 65989-97E
Cold Cranking Rating
Not Available
Capacity (10HR Rate)
Not Available
Regulated Output Spec
Key-OFF Parasitic Limit
V DC
Multimeter Test Diagnosis
Enter your multimeter terminal reading on the left to view instant diagnostic interpretations and recommended workshop actions.
OEM Factory AGM BatteryOEM Replacement
Dimensions: • Weight: Not Available. Pre-filled absorbed glass mat technology engineered for heavy vibration resistance.
Lithium LiFePO4 UpgradeUp to 70% Lighter
Features built-in RE-START jump starting reserve. Never stranded by dead lights: press the restart button on the top terminal to crank the motorcycle without jumper cables.
Smart Maintainer SpecBattery Life Extension
Standard Charge Rate: . Automated desulfation & float maintenance ensures full capacity retention during off-season winter storage.
Recommended Parts: •

Harley-Davidson Diagnostic Fault Codes & Multimeter Bench Testing

FI & OBD2 Decoder
Authentic factory ECU fault codes, sensor resistance specifications, and harness pinout troubleshooting.
Launch Full Harley-Davidson DTC Engine→
Code P0107Manifold Absolute Pressure (MAP)
MAP sensor input low/open (< 0.20V DC) during key-on or running.
Test: 5.0V VRef at Pin 2; 4.5-5.0V signal key-on engine-off; Pin 1 ground < 0.1V.
Code P0374Crankshaft Position (CKP) Sensor
Zero sync pulses detected from CKP sensor during starter turnover.
Test: Measure 800-1,100 Ω across CKP pins; must generate ≥ 1.0V AC while cranking.
Code P1510Electronic Throttle Control (ETC)
EFI Limited Performance Mode (Limp Mode locked to 20-30% throttle).
Test: Inspect 6-pin throttle body connector for terminal fretting / backprobe TGS 5V sum.
Code B2161Body Control Module (BCM)
Brake Lamp Output open circuit detected when front or rear brake applied.
Test: Test 12V at Blue/Red wire at tail lamp socket; check front brake switch plunger.
Looking for other error codes, sensor pinouts, or OBD2/Euro 5 codes?

Official NHTSA Safety Recalls & Technical Bulletins

2 Active Campaigns
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
The U.S. National Highway Traffic Safety Administration reports 2 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.
NHTSA #25V375000SUSPENSION:REAR:SHOCK ABSORBER
▼
Defect Description

Harley Safety Recall 0188: 2018–2024 Breakout rear shock pre-load adjuster mounting tab can fracture under vibration.

Safety Hazard / Consequence

Adjuster contact with 240mm rear tire can cause sudden tire deflation.

Factory Remedy & Repair Action

Dealers install reinforced retention bracket countermeasure kit.

NHTSA #23V591000SUSPENSION:REAR:SHOCK ABSORBER
▼
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins
Bulletin #HD-0181Safety Recall Bulletin 0181 & 0182 / NHTSA 23V-591: Softail Rear Shock Absorber Pre-Load Fastener Rear Tire Contact
Source: RCLRPT-23V591-6615.PDF
Mandated Torques:Torque: 12–15 N·m (106–133 in-lb) (Pre-load Adjuster Bracket Mounting Screw)Torque: 95–108 N·m (70–80 lb-ft) (Upper & Lower Shock Eye Mount Bolts)Torque: 136–149 N·m (100–110 lb-ft) (Rear Axle Cone Nut)
Consumable Specs:Loctite 243 Medium Strength Blue ThreadlockerIsopropyl Alcohol Surface Cleaner
Genuine Part Numbers:102008499150010454000142
Recalls 0181 & 0188 • NHTSA 23V-591 & 25V-375

Harley-Davidson Softail Mono-Shock Pre-Load Adjuster & Tire Clearance Architecture

Fast adjuster bracket reinforcement, tire clearance inspection (≥ 10 mm), and 95–108 N·m shock mounting torques.

SOFTAIL HIDDEN MONO-SHOCK CHASSISFRONT EYE: 95-108 N·mREAR EYE: 95-108 N·mKNOB (0-5)BRACKET: 12-15 N·mLOCTITE 243 BLUE240mm REAR TIREGAP ≥ 10 mmMANDATED SERVICE & RECALL PROTOCOL:• Fastener: Retorque adjuster screw to 12–15 N·m (106–133 in-lb) with Loctite 243 Blue.• Bracket Kit: Install reinforced retention bracket (Recall 0188 countermeasure).• Clearance: Verify ≥ 10 mm air gap between adjuster knob and tire across full stroke.
Shock Mounting Bolts95–108 N·m (70–80 lb-ft)
Adjuster Bracket Screw12–15 N·m (106–133 in-lb)
Chemical ThreadlockerLoctite 243 (Medium Blue)
Dynamic Tire Clearance≥ 10.0 mm (0.39 in)
Bulletin #HD-TSB-23-08Technical Service Bulletin TSB-23-08: Breakout 21-Inch Front Turbine Wheel, 49mm Fork Clamp Torques & Steering Head Fall-Away
Source: H-D_TSB_23-08_Breakout_Front_End.pdf
Mandated Torques:Torque: 24–27 N·m (18–20 lb-ft) (Upper & Lower Triple Clamp Pinch Bolts)Torque: 102 N·m (75 lb-ft) (Front Axle Shaft)Torque: 24–27 N·m (18–20 lb-ft) (Front Axle Pinch Bolts)Torque: 38–52 N·m (28–38 lb-ft) (Front Brake Caliper Mounting Bolts)Torque: 41–47 N·m (30–35 lb-ft) (21-Inch Brake Rotor Torx Bolts - Loctite 243)
Consumable Specs:Loctite 243 Medium Strength Blue ThreadlockerHarley-Davidson Special Purpose Grease (Steering Head Bearings)
Genuine Part Numbers:433005864550040341500147
Custom Chopper Rake • 21-Inch Front End

Harley-Davidson Breakout 21-Inch Front Wheel, 49mm Fork & Steering Head Architecture

34° fork rake / 37° neck rake geometry, 49mm dual-bending valve fork clamp torques (24–27 N·m), and 21-inch turbine wheel specs.

37° RAKE STEERING NECKFALL-AWAY: 1.0-2.0 in SWEEPUPPER PINCH: 24-27 N·mLOWER PINCH: 24-27 N·m49mm DUAL-BENDING VALVE FORKFRONT AXLE: 102 N·mPINCH BOLTS: 24-27 N·mCALIPER: 38-52 N·mBREAKOUT CHOPPER SPECS:• Front Rim: 21 x 3.5 in Turbine• Rear Rim: 18 x 8.0 in Turbine• Front Tire: 130/60B21 63H• Rear Tire: 240/40R18 79V• Fork Rake: 34.0°• Total Frame Rake: 37.0°• Fork Pinch Bolts: 24–27 N·m• Stem Preload: 1.0–2.0 in sweep• Front Axle: 102 N·m (75 lb-ft)• Rear Axle: 136–149 N·m• Caliper Mounts: 38–52 N·m• Plugs (4x): 16–24 N·m (Gap 0.8mm)• Oil: 4.70 L 20W-50 Syn3
Front 21" Axle Nut102 N·m (75 lb-ft)
Fork Clamp Pinch Bolts24–27 N·m (18–20 lb-ft)
Steering Head Fall-Away1.0–2.0 in (25–51 mm) Sweep
Front Brake Caliper38–52 N·m (28–38 lb-ft)

Explore Other Subsystems for this 2022 Harley-Davidson Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS)

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview
Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →
Subsystem Guide/fluids

Fluids & Capacities

Oil: 4.70 L (5.00 US qt) • Coolant: Not Applicable (Air / Oil Cooled) • Brake: N/A

Open Dedicated Workbench →
Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →
Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →
Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →
Subsystem Guide/fuel-delivery

Fuel Delivery & TB Sync

Idle: N/A • Rail Pressure: N/A • Vacuum: N/A

Open Dedicated Workbench →
Subsystem Guide/tires

Tires & Gearing

Front: 130/60B21 63H • Rear: 240/40R18 79V

Open Dedicated Workbench →
Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →
Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →
← Return to Full Comprehensive Motorcycle Specification Hub (2022 Harley-Davidson Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS))

Looking for direct-fit parts for this 2022 Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS)?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts