Dedicated Subsystem WorkbenchPlatform Gen: 2013–2026

2020 Harley-Davidson Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS) Throttle Body Synchronization & Fuel Delivery

Multi-cylinder vacuum sync specs, idle speed, EFI high-pressure fuel rail PSI, and injector resistance multimeter bench for 2020 Harley-Davidson Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS).

Technical PassportOEM VERIFIED

Engine

1923cc

Cooling

Air / Oil-Cooled with Dual Internal Counterbalancers

Final Drive

Belt Drive

Engine Oil

4.70 L (5.00 US qt)

Spark Plug

H-D 6R10 / 6R12

Front Tire

130/60B21 63H

Browse Flagship Teardowns →

Gen 2013–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2013 through 2026.

SPECS-TO-CART BUNDLESFactory Direct-Fit Maintenance Bundles Available

1-Click verified Motul engine oil service kits, race filters, spark plugs, and brake fluid pre-measured for this 2020 Harley-Davidson Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS).

Configure Service Bundles→

Select Model Year:(Active: 2020)
14 Production Years (2013–2026)

2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Suggested Items4 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Official NHTSA Safety Recalls & Technical Bulletins

2 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 2 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #25V375000SUSPENSION:REAR:SHOCK ABSORBER

▼

Defect Description

Harley Safety Recall 0188: 2018–2024 Breakout rear shock pre-load adjuster mounting tab can fracture under vibration.

Safety Hazard / Consequence

Adjuster contact with 240mm rear tire can cause sudden tire deflation.

Factory Remedy & Repair Action

Dealers install reinforced retention bracket countermeasure kit.

NHTSA #23V591000SUSPENSION:REAR:SHOCK ABSORBER

▼

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins

Bulletin #HD-0181Safety Recall Bulletin 0181 & 0182 / NHTSA 23V-591: Softail Rear Shock Absorber Pre-Load Fastener Rear Tire Contact

Source: RCLRPT-23V591-6615.PDF

Mandated Torques:Torque: 12–15 N·m (106–133 in-lb) (Pre-load Adjuster Bracket Mounting Screw)Torque: 95–108 N·m (70–80 lb-ft) (Upper & Lower Shock Eye Mount Bolts)Torque: 136–149 N·m (100–110 lb-ft) (Rear Axle Cone Nut)

Consumable Specs:Loctite 243 Medium Strength Blue ThreadlockerIsopropyl Alcohol Surface Cleaner

Genuine Part Numbers:102008499150010454000142

Recalls 0181 & 0188 • NHTSA 23V-591 & 25V-375

Harley-Davidson Softail Mono-Shock Pre-Load Adjuster & Tire Clearance Architecture

Fast adjuster bracket reinforcement, tire clearance inspection (≥ 10 mm), and 95–108 N·m shock mounting torques.

Shock Mounting Bolts95–108 N·m (70–80 lb-ft)

Adjuster Bracket Screw12–15 N·m (106–133 in-lb)

Chemical ThreadlockerLoctite 243 (Medium Blue)

Dynamic Tire Clearance≥ 10.0 mm (0.39 in)

Bulletin #HD-TSB-23-08Technical Service Bulletin TSB-23-08: Breakout 21-Inch Front Turbine Wheel, 49mm Fork Clamp Torques & Steering Head Fall-Away

Source: H-D_TSB_23-08_Breakout_Front_End.pdf

Mandated Torques:Torque: 24–27 N·m (18–20 lb-ft) (Upper & Lower Triple Clamp Pinch Bolts)Torque: 102 N·m (75 lb-ft) (Front Axle Shaft)Torque: 24–27 N·m (18–20 lb-ft) (Front Axle Pinch Bolts)Torque: 38–52 N·m (28–38 lb-ft) (Front Brake Caliper Mounting Bolts)Torque: 41–47 N·m (30–35 lb-ft) (21-Inch Brake Rotor Torx Bolts - Loctite 243)

Consumable Specs:Loctite 243 Medium Strength Blue ThreadlockerHarley-Davidson Special Purpose Grease (Steering Head Bearings)

Genuine Part Numbers:433005864550040341500147

Custom Chopper Rake • 21-Inch Front End

Harley-Davidson Breakout 21-Inch Front Wheel, 49mm Fork & Steering Head Architecture

34° fork rake / 37° neck rake geometry, 49mm dual-bending valve fork clamp torques (24–27 N·m), and 21-inch turbine wheel specs.

Front 21" Axle Nut102 N·m (75 lb-ft)

Fork Clamp Pinch Bolts24–27 N·m (18–20 lb-ft)

Steering Head Fall-Away1.0–2.0 in (25–51 mm) Sweep

Front Brake Caliper38–52 N·m (28–38 lb-ft)

Explore Other Subsystems for this 2020 Harley-Davidson Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS)

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview

Subsystem Guide/torques

Fastener Torques

Engine drain plug, axle spindles, caliper mounts, triple clamp pinch bolts & thread lubrication derating guide.

Open Dedicated Workbench →

Subsystem Guide/fluids

Fluids & Capacities

Oil: 4.70 L (5.00 US qt) • Coolant: Not Applicable (Air / Oil Cooled) • Brake: N/A

Open Dedicated Workbench →

Subsystem Guide/fuses-relays

Fuses & Relays

Main: N/A • Location: N/A

Open Dedicated Workbench →

Subsystem Guide/compression

Compression & Leakdown

Ratio: N/A

Open Dedicated Workbench →

Subsystem Guide/valves

Valve Clearances

Intake: N/A mm • Exhaust: N/A mm

Open Dedicated Workbench →

Subsystem Guide/electrical

Charging & Battery

Battery: YTX20HL-BS / H-D 65989-97E

Open Dedicated Workbench →

Subsystem Guide/tires

Tires & Gearing

Front: 130/60B21 63H • Rear: 240/40R18 79V

Open Dedicated Workbench →

Subsystem Guide/suspension

Suspension & Sag

Front Travel: N/A • Rear Travel: N/A

Open Dedicated Workbench →

Subsystem Guide/maintenance

Maintenance Schedule

Oil: N/A • Valves: N/A • Plugs: N/A

Open Dedicated Workbench →

← Return to Full Comprehensive Motorcycle Specification Hub (2020 Harley-Davidson Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS))

Looking for direct-fit parts for this 2020 Breakout / Breakout 114 / 117 (FXSB / FXBR / FXBRS)?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts