Skip to Main Content
Free Shipping Over $15030-Day Returns
Free Shipping $150+30-Day Returns
Dedicated Subsystem WorkbenchPlatform Gen: 2020–2026

2026 Ducati Streetfighter V4 / V4 S / SP / SP2 Charging System, Stator AC Output & Battery Health

Stator 3-phase AC voltage at 5,000 RPM, coil resistance, regulated DC voltage, battery code YT12B-BS (12V 10Ah) / Lithium-Ion (SP / S), CCA rating, and multimeter charging diagnostic steps for 2026 Ducati Streetfighter V4 / V4 S / SP / SP2.

Technical PassportOEM VERIFIED
Engine
1103cc
Cooling
Liquid-Cooled
Final Drive
525 Chain
Engine Oil
3.80 L (4.02 US qt)
Spark Plug
NGK RMAR9A-10
Front Tire
120/70 ZR17 (Pirelli Diablo Rosso Corsa II / IV)
Browse Flagship Teardowns →
Gen 2020–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2026.

Select Model Year:(Active: 2026)
7 Production Years (2020–2026)
Suggested Items3 Verified Workshop Consumables Available for this Job
View Suggested Items ↓

3-Phase Charging System & Battery Diagnostic Flowchart

Yuasa & OEM Standards
Multimeter troubleshooting protocols, cold cranking amps (CCA) ratings, 3-phase stator AC outputs, and regulator-rectifier health verification.
Shop YT12B-BS (12V 10Ah) / Lithium-Ion (SP / S) Batteries
OEM Battery Code
YT12B-BS (12V 10Ah) / Lithium-Ion (SP / S)
Cold Cranking Rating
Not Available
Capacity (10HR Rate)
Not Available
Regulated Output Spec
Key-OFF Parasitic Limit
V DC
Multimeter Test Diagnosis
Enter your multimeter terminal reading on the left to view instant diagnostic interpretations and recommended workshop actions.
OEM Factory AGM BatteryOEM Replacement
Dimensions: • Weight: Not Available. Pre-filled absorbed glass mat technology engineered for heavy vibration resistance.
Lithium LiFePO4 UpgradeUp to 70% Lighter
Features built-in RE-START jump starting reserve. Never stranded by dead lights: press the restart button on the top terminal to crank the motorcycle without jumper cables.
Smart Maintainer SpecBattery Life Extension
Standard Charge Rate: . Automated desulfation & float maintenance ensures full capacity retention during off-season winter storage.
Recommended Parts: •

Ducati Diagnostic Fault Codes & Multimeter Bench Testing

FI & OBD2 Decoder
Authentic factory ECU fault codes, sensor resistance specifications, and harness pinout troubleshooting.
Launch Full Ducati DTC Engine→
Code P0105Manifold Absolute Pressure (MAP)
Intake pressure sensor signal out of range or open circuit.
Test: 5.0V VRef at pin 1; 2.8-3.1V at sea level ambient key-on.
Code P0115Engine Coolant Temp (ECT)
Coolant temperature sensor circuit open or shorted to ground.
Test: Measure NTC thermistor: ~2.5 kΩ at 20°C (68°F), 300 Ω at 80°C (176°F).
Code P0335Crankshaft Position (Pick-Up) Sensor
Zero sync timing pulses detected from CPS during starter cranking.
Test: Measure VR inductive pickup coil: 680-850 Ω across connector pins.
Code P1115Ride-by-Wire Throttle Grip (APS)
APS potentiometer tracks 1 & 2 correlation error.
Test: Track 1: 0.7-4.2V; Track 2: 0.35-2.1V (Track 1 = 2x Track 2 ratio).
Code P1600CAN Bus Line / BBS Comm Malfunction
Black Box System / Dashboard / ECU bus-off communication error.
Test: Measure 60 Ω CAN termination resistance between CAN-H and CAN-L with key off.
Looking for other error codes, sensor pinouts, or OBD2/Euro 5 codes?

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)
U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).
Verify VIN on NHTSA.gov
No Active Federal Safety Recalls Reported
The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2026 Ducati Streetfighter V4 / V4 S / SP / SP2 platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.
OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins
Bulletin #SRV-RCL-25-002Safety Recall 25V-570: Panigale V4 & Streetfighter V4 Single-Sided Swingarm Rear Wheel Axle Shaft Replacement
Source: RCLRPT-25V570-3457.pdf
Mandated Torques:Rear Wheel Collar Nut (M48x1.5): 230 N·m ± 5% (55mm 12-point socket, Shell Retinax HD2 grease)Eccentric Hub Pinch Clamp Screws (2x M12): 35 N·m ± 5% (1-2-1 alternating sequence)Rear Sprocket Cush Drive Nuts (6x M10x1.25): 48 N·m ± 5% (Loctite 243)Rear Brake Rotor Screws (4x M8x20): 25 N·m ± 5% (Loctite 270)
Consumable Specs:Shell Retinax HD2 or Gadus high-load axle greaseLoctite 243 medium-strength threadlockerLoctite 270 high-strength threadlocker
Genuine Part Numbers:81920831AA (Recalled Rear Wheel Shaft)81920611A (Recalled Rear Axle Assembly)81920951AA (Countermeasure Rear Wheel Shaft)75010071E (M48x1.5 Wheel Collar Nut)85210571A (Conical Belleville Spring Washer)75990081A (Safety Circlip Hairpin Pin)
NHTSA Recall 25V-570Ducati Campaign SRV-RCL-25-002

Ducati Panigale V4 / Streetfighter V4 Single-Sided Swingarm Rear Wheel Axle Shaft

Structural integrity recall: Replacement of rear wheel shaft (81920831AA / 81920611A), notch effect mitigation, M48 collar nut 230 N·m & eccentric clamp 35 N·m.

Critical Safety CampaignM48 Nut 230 N·m / Eccentric 35 N·m
Genuine Part Numbers:81920831AA81920611A81920951AA75010071E
ALUMINUM SINGLE-SIDED SWINGARMECCENTRIC HUB CARRIER (CHAIN TENSION CAM)2x M12 PINCH BOLTS (35 N·m)CRITICAL STRESS NOTCH ZONE (81920831AA)6x CUSH NUTS (48 N·m)DRIVE FLANGEM48 NUT (230 N·m)+ SAFETY CLIPCLICK ANY SUBSYSTEM IN THE DIAGRAM FOR DETAILED ENGINEERING SPECIFICATIONS & RECALL PROTOCOL
NHTSA Safety Campaign 25V-570 / Ducati SRV-RCL-25-002Desmosedici Stradale / Single-Sided Swingarm Platform
Bulletin #SRV-RCL-26-001Safety Recall 26V-050: Panigale V4 & Streetfighter V4 Rear Brake Line Heat Shield Protection
Source: RCLRPT-26V050.pdf
Mandated Torques:Rear Brake Line Banjo Screws: 25 N·m ± 5%Heat Shield Retaining Bracket Screws: 5 N·m ± 10%
Consumable Specs:DOT 4 Brake FluidThermal Shield Reflective Sleeve
Genuine Part Numbers:High-temperature thermal reflective sleeve assemblyCopper crush sealing washers

Explore Other Subsystems for this 2026 Ducati Streetfighter V4 / V4 S / SP / SP2

Jump straight into dedicated factory specifications and interactive workshop diagnostic engines.

← Full Motorcycle Overview
← Return to Full Comprehensive Motorcycle Specification Hub (2026 Ducati Streetfighter V4 / V4 S / SP / SP2)

Looking for direct-fit parts for this 2026 Streetfighter V4 / V4 S / SP / SP2?

Browse authentic verified parts, motor oils, filters, brake pads, and tires that fit this exact bike.

Browse Direct-Fit Parts