Dedicated Subsystem WorkbenchPlatform Gen: 2020–2026

2025 Ducati Streetfighter V4 / V4 S / SP / SP2 Fastener Torque Specs & Tightening Matrix

Factory torque specs for 2025 Ducati Streetfighter V4 / V4 S / SP / SP2: oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.

Technical PassportOEM VERIFIED

Engine

1103cc

Cooling

Liquid-Cooled

Final Drive

525 Chain

Engine Oil

3.80 L (4.02 US qt)

Spark Plug

NGK RMAR9A-10

Front Tire

120/70 ZR17 (Pirelli Diablo Rosso Corsa II / IV)

Browse Flagship Teardowns →

Gen 2020–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2020 through 2026.

Select Model Year:(Active: 2025)
7 Production Years (2020–2026)

2020 2021 2022 2023 2024 2025 2026

Suggested Items6 Verified Workshop Consumables Available for this Job

View Suggested Items ↓

Suggested Items · You Might Be Interested In

Suggested Items & Workshop Consumables for this Fastener & Chassis Torque Job

Task-critical chemicals, precision tools, and replacement consumables dynamically matched to the 2025 Ducati Streetfighter V4 / V4 S / SP / SP2 factory engineering specifications.

6 Verified Products Found

CRITICAL THREADLOCKER

PERMATEXIn Stock

PERMATEX Gel Threadlocker - Blue

Prevents critical engine, brake caliper, and sprocket fasteners from backing out under severe harmonic vibration.

$14.99USD

ANTI-SEIZE LUBRICANT

MOTOREXIn Stock

MOTOREX COPPER ANTI-SEIZE SPRAY

Prevents galling, galvanic corrosion, and thread seizure on spark plug threads, exhaust studs, and axle pinch bolts.

$18.50USD

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

PRECISION DRIVE TOOL

JIMSIn Stock

JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters

Precision chrome vanadium metric drive tool to torque fasteners to factory spec without rounding fastener heads.

$27.90USD

CALIPER REBUILD ESSENTIAL

EBC BRAKESIn Stock

EBC Standard Brake Pads

Direct replacement high-friction pads required when servicing and re-torquing front or rear brake caliper assemblies.

$24.72USD

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

ROTOR & THREAD CLEANER

DRAG SPECIALTIESIn Stock

DRAG SPECIALTIES BRAKE PARTS CLEANER DRAG

Zero-residue fast-evaporating solvent to strip old thread compound, grease, and brake dust from fastener threads.

$8.95USD

FINAL DRIVE LUBRICANT

MOTULIn Stock

MOTUL CHAIN LUBE ROAD 400ML

High-tack synthetic lubricant required when torquing rear axle nuts and setting final drive chain tension.

$15.00USD

Critical Fastener Torque Tolerances

FSM Certified Specs

Factory workshop tightening torque ratings for axles, calipers, engine plugs, and triple clamps.

Lube:

Fastener / Component	Torque (N·m)	Service Note & Thread Guidance	System
Rear Wheel Collar Nut (M48×1.5) M48x1.5• 55mm 12-point socket• Shell Retinax HD2 grease on thread & conical washer	230 N·m (170 ft-lb)	RECALL 25V-570: Countermeasure shaft 81920951AA; insert safety hairpin clip 75990081A WARNING: Single-sided swingarm axle recall. Torque strictly to 230 Nm. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Chassis
Eccentric Hub Pinch Clamp Screws (2x M12) M12x1.25• 10mm hex• None (dry threads)	35 N·m (25.8 ft-lb)	1-2-1 alternating torque sequence WARNING: Even clamping prevents bearing ovalization. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Chassis
Front Brake Caliper Radial Bolts (4x M10×1.25) M10x1.25• Torx T50• None (dry)	45 N·m (33.2 ft-lb)	Brembo Stylema calipers WARNING: Life-critical fastener. Suggested Item:JIMS USA Specialty Precision Sockets, Alignment Pins & Adapters ($27.90) →	Brakes

Technical Standard:Always calibrate torque wrenches prior to critical chassis fastening. Values reflect clean, dry threads unless threadlocker or anti-seize is specifically noted.

Official NHTSA Safety Recalls & Technical Bulletins

0 Open Campaigns (Clean)

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

No Active Federal Safety Recalls Reported

The U.S. DOT National Highway Traffic Safety Administration (NHTSA) records zero open safety recall campaigns for the 2025 Ducati Streetfighter V4 / V4 S / SP / SP2 platform. Always check your individual 17-digit VIN at an authorized dealership or via NHTSA.gov for individual recall completions.

OEM Workshop Archives

Official Factory Service Bulletins & Field Updates

2 Documented Bulletins

Bulletin #SRV-RCL-25-002Safety Recall 25V-570: Panigale V4 & Streetfighter V4 Single-Sided Swingarm Rear Wheel Axle Shaft Replacement

Source: RCLRPT-25V570-3457.pdf

Mandated Torques:Rear Wheel Collar Nut (M48x1.5): 230 N·m ± 5% (55mm 12-point socket, Shell Retinax HD2 grease)Eccentric Hub Pinch Clamp Screws (2x M12): 35 N·m ± 5% (1-2-1 alternating sequence)Rear Sprocket Cush Drive Nuts (6x M10x1.25): 48 N·m ± 5% (Loctite 243)Rear Brake Rotor Screws (4x M8x20): 25 N·m ± 5% (Loctite 270)

Consumable Specs:Shell Retinax HD2 or Gadus high-load axle greaseLoctite 243 medium-strength threadlockerLoctite 270 high-strength threadlocker

Genuine Part Numbers:81920831AA (Recalled Rear Wheel Shaft)81920611A (Recalled Rear Axle Assembly)81920951AA (Countermeasure Rear Wheel Shaft)75010071E (M48x1.5 Wheel Collar Nut)85210571A (Conical Belleville Spring Washer)75990081A (Safety Circlip Hairpin Pin)

NHTSA Recall 25V-570Ducati Campaign SRV-RCL-25-002

Ducati Panigale V4 / Streetfighter V4 Single-Sided Swingarm Rear Wheel Axle Shaft

Structural integrity recall: Replacement of rear wheel shaft (81920831AA / 81920611A), notch effect mitigation, M48 collar nut 230 N·m & eccentric clamp 35 N·m.

Critical Safety CampaignM48 Nut 230 N·m / Eccentric 35 N·m

Genuine Part Numbers:81920831AA81920611A81920951AA75010071E