Dedicated Subsystem WorkbenchPlatform Gen: 2015–2026

2019 Ducati Scrambler 800 (Icon / Full Throttle / Nightshift) Fastener Torque Specs & Tightening Matrix

Factory torque specs for 2019 Ducati Scrambler 800 (Icon / Full Throttle / Nightshift): oil drain plug, axle nuts, caliper mount bolts, spark plugs, triple clamp pinch bolts with thread lubrication derating guide.

Technical PassportOEM VERIFIED

Engine

803cc

Cooling

Air/Oil-Cooled

Final Drive

520 Chain

Engine Oil

3.10 L (3.28 US qt)

Spark Plug

NGK DCPR8E

Front Tire

110/80 R18 (Pirelli MT 60 RS)

Gen 2015–2026

Factory Platform Compatibility: All workshop fluid capacities, maintenance milestones, torque specifications, and consumables on this specification sheet are factory-identical across model years 2015 through 2026.

Select Model Year:(Active: 2019)
12 Production Years (2015–2026)

2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026

Critical Fastener Torque Tolerances

FSM Certified Specs

Factory workshop tightening torque ratings for axles, calipers, engine plugs, and triple clamps.

Lube:

Fastener / Component	Torque (N·m)	Service Note & Thread Guidance	System
Rear Wheel Axle Nut (M25×1.25) M25x1.25• 32mm socket• Shell Retinax grease under washer	145 N·m (107 ft-lb)	Torque to 145 Nm before setting chain adjuster locknuts WARNING: Double-sided swingarm axle nut.	Chassis
Front Axle Shaft (M25×1.25) M25x1.25• 30mm socket• Shell Retinax grease under nut flange	63 N·m (46.5 ft-lb)	Torque axle nut before tightening right fork clamp pinch bolts WARNING: Verify 18-inch front wheel spins smoothly.	Chassis
Front Caliper Radial Mounting Bolts (2x M10×1.25) M10x1.25• Torx T50• None (dry)	45 N·m (33.2 ft-lb)	Brembo 4-piston radial caliper with 330mm floating disc WARNING: Life-critical fastener.	Brakes
Engine Oil Drain Plug (M12×1.5) M12x1.5• 5mm Hex• New copper washer (85250051A)	20 N·m (14.8 ft-lb)	Clean magnetic collector before reinstalling WARNING: Do not exceed 20 Nm.	Engine

Technical Standard:Always calibrate torque wrenches prior to critical chassis fastening. Values reflect clean, dry threads unless threadlocker or anti-seize is specifically noted.

Official NHTSA Safety Recalls & Technical Bulletins

3 Active Campaigns

U.S. Department of Transportation compliance database (Title 49 U.S.C. Chapter 301).

Verify VIN on NHTSA.gov

The U.S. National Highway Traffic Safety Administration reports 3 safety recall campaigns associated with this platform. Independent repair shops and riders should confirm that authorized dealership warranty remedies have been applied.

NHTSA #21V361000EXTERIOR LIGHTING:TURN SIGNAL

Received: 01/01/2021▼

Defect Description

Ducati North America (Ducati) is recalling certain 2021 Scrambler 800 Night Shift motorcycles. The front and rear turn signal lights may not flash brightly enough. As such, these motorcycles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Safety Hazard / Consequence

Turn signal lights that aren't bright enough can reduce other driver's ability to see that the turn signals have been activated, increasing the risk of a crash.

Factory Remedy & Repair Action

Dealers will replace the front and rear turn signals, free of charge. Owner notification letters were mailed on June 28, 2021. Owners may contact Ducati customer service at 1-888-391-5446. Ducati's number for this recall is SRV-RCL-21-009.

Manufacturer Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

NHTSA #20V781000ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES

Received: 01/01/2021▼

NHTSA #16V891000STRUCTURE:MOTORCYCLE:KICKSTAND/CENTER STAND

Received: 01/01/2021▼